Distribution Boards & Miniature Circuit Breakers BI MEANS BUSINESS A Type SPN Distribution Boards B Type TPN Distribution Boards A & B Type SPSN Distribution Boards Miniature Circuit Breakers 20V/15V AC HRC Single Pole Fuse Modules RCBO s Combined /RCD Units Accessories A Type Board DIN Rail Conversion Kits Residual Current Circuit Breakers Enclosures Contactors and Timers 3
Distribution Boards (IPX) FEXIBIITY British by design and manufacture, Talisman Plus is a durable range of boards allowing the installer maximum flexibility, offering the choice of switchdisconnector incomers, RCCB incomers, fuse-switch incomers, MCCB incomers or direct connection; coupled with the advantages of either factory fitted incoming devices or the choice of a wide range of easy fit installer fitted incomer kits. All boards can be supplied with busbar systems to SPSN, DP or TP configurations. Plus a formidable range of outgoing s, RCBO s and HRC fuse modules. Also a versatile choice of accessories, including locking devices, board linking kits, command devices and DIN rail enclosures. STANDARDS Talisman Plus distribution boards comply with the following standards: A type boards = BS EN 6039-3 and also BS 586 Part 12 and 13. B type boards = BS EN 6039-3 and also BS 586 Part 12. s = BS EN 60898 RCBO s = BS EN 61009 HRC fuse modules = BS 1361 Switch-Disconnectors = BS EN 6097-3 Fused Combination Switches = BS EN 6097-3 Double pole RCCB s = BS EN 61008 Four pole RCCB s = BS EN 61008 High Performance s Talisman Plus current limiting 10kA s are available from 1A to 63A in types B, C or D* with SP, SPSN, DP and TP configurations. Units incorporate a trip free mechanism to prevent s from being held in the ON position. Talisman Plus wire in - wire out s are designed for mounting in Talisman Plus distribution boards. The breakers are also suitable for mounting on DIN rail, with comb busbars or individual wiring. Thermally calibrated to 0 C as standard, a 50 C calibration is also available. FEATURES Revolutionary RCD pod Cover within board profile Generous wiring space Neutral and phase busbars both fully shrouded Optional clean earth facility Detachable neutral link supplied as standard Choice of easy fit incomers - Switch-Disconnectors RCCB s 30mA, 100mA, 300mA Terminal blocks Enclosure ingress protection to IPX (IP3 on request) HRC fuse modules Blanking modules for shrouding of unused apertures and busbar stabs Wire-in, wire-out s Positive contact indication feature on s and RCCB s Self aligning feature on s Finished in Bill light grey - RA7032 * D type 0A, 50A and 63A ratings are limited to 6kA.
A Type SPN Distribution Boards (IPX) FACTORY FITTED INCOMERS Select Distribution Board: Choose number of outgoing ways Select outgoing s from table on page 12 Select accessories from table on page 1. A TYPE, SPN DISTRIBUTION BOARD FITTED WITH 100A SPSN SWITCH-DISCONNECTOR INCOMER NO. OF DIMENSIONS* DISTRIBUTION OUTGOING (MM) BOARD SP WAYS H W D CAT. NO. 261.5 238.0 13.0 AT101 7 261.5 292.0 13.0 AT1071 10 261.5 36.0 13.0 AT1101 13 261.5 00.0 13.0 AT1131 16 261.5 5.0 13.0 AT1161 INSTAER FITTED INCOMERS Select Distribution Board: Choose number of outgoing ways Select outgoing s from table on page 12 Select accessories from table on page 1. A TYPE, SPN DISTRIBUTION BOARD WITHOUT INCOMER FITTED NO. OF DIMENSIONS* DISTRIBUTION OUTGOING (MM) BOARD SP WAYS H W D CAT. NO. 261.5 238.0 13.0 AT10 7 261.5 292.0 13.0 AT107 10 261.5 36.0 13.0 AT110 13 261.5 00.0 13.0 AT113 16 261.5 5.0 13.0 AT116 OPTIONA INSTAER FITTED INCOMING DEVICES FOR A TYPE DISTRIBUTION BOARDS COPPER INCOMER INCOMER INCOMER CABE INCOMER RATING TYPE POES CAPACITY CAT. NO. 100A Terminal Block SPN T12TB 100A Switch-Disconnector SPSN T11NSD 100A RCCB 30mA 2 Pole 50mm 2 R1002S30 100A RCCB 100mA 2 Pole R1002S100 100A RCCB 300mA 2 Pole R1002S300 For a full range of RCCB s see page 16. A TYPE CABE CAPACITIES INCOMING COPPER CABE CONNECTING COPPER CABE DEVICES CAPACITY BARS CAPACITY 100A Terminal Block 50mm 2 Neutral Bar Outgoing 25mm 2 100A Switch-Disconnector 50mm 2 Earth Bar 25mm 2 100A RCCB 50mm 2 Enclosure earth terminal bolt M6. Switch-Disconnector ocking Device Cat. No. TSD plus Padlock P1252. Clean Earth kits will fit all A type boards, 11 hole Cat. No. AT11EK. *For detailed dimensions see page 6. Split load and dual tariff distribution boards can be supplied - please contact the factory. 5
A Type SPN Distribution Boards (IPX) A TYPE DIMENSIONS DIMENSIONS (MM) DISTRIBUTION BOARD & A B C DIN RAI ENCOSURE CATAOGUE NUMBERS 152.0 38.5 77.0 ATE 238.0 81.5 163.0 AT10, AT101, AT6E 292.0 108.5 217.0 AT107, AT1071, AT9E 36.0 135.5 271.0 AT110, AT1101, ATDP105, AT12E 00.0 162.5 325.0 AT113, AT1131 5.0 189.5 379.0 AT116, AT1161, ATDP108, AT18E 6
B Type TPN Distribution Boards (IPX) FACTORY FITTED INCOMERS Select Distribution Board: Choose number of outgoing ways Select type of incomer i.e. 100A TPN Switch-Disconnector, or Split load 100A Switch-Disconnector with 80A 30mA RCCB Select outgoing s from table on page 12 Select accessories from table on page 1 B TYPE 125A DISTRIBUTION BOARD FITTED WITH 100A TP SWITCH-DISCONNECTOR INCOMER NO. OF DIMENSIONS* DISTRIBUTION OUTGOING (MM) BOARD TP WAYS H W D CAT. NO. 97.5 00.0 131.5 BT101 6 551.5 00.0 131.5 BT1061 8 605.5 00.0 131.5 BT1081 12 767.5 00.0 131.5 BT1121 16 875.5 00.0 131.5 BT1161 B TYPE SPIT OAD BOARD FITTED WITH 100A SWITCH-DISCONNECTOR AND 80A 30mA RCCB BTS88 INCUDES 100A, 30mA RCCB NO. OF NO. OF RCCB DIMENSIONS* DISTRIBUTION NON RCCB PROTECTED (MM) BOARD TP WAYS TP WAYS H W D CAT. NO. 8 821.5 00.0 131.5 BTS8 6 6 821.5 00.0 131.5 BTS66 8 821.5 00.0 131.5 BTS8 8 8 922.0 00.0 131.5 BTS88 * For detailed dimensions see page 10. Switch-Disconnector ocking Device Cat. No. TSD plus Padlock P1252. 7
B Type TPN Distribution Boards (IPX) B TYPE 125A DISTRIBUTION BOARD WITHOUT INCOMING DEVICE NO. OF DIMENSIONS* DISTRIBUTION OUTGOING (MM) BOARD TP WAYS H W D CAT. NO. 97.5 00.0 131.5 BT10 6 551.5 00.0 131.5 BT106 8 605.5 00.0 131.5 BT108 12 767.5 00.0 131.5 BT112 16 875.5 00.0 131.5 BT116 2 1350.0 560.0 155.0 BT22 * For detailed dimensions see page 10. B TYPE 200A DISTRIBUTION BOARD WITHOUT INCOMING DEVICE INSTAER FITTED INCOMERS Select Distribution Board: 125A or 200A Choose number of outgoing ways Select type of incomer from table below Select outgoing s from table on page 12 Select accessories from table on page 1 NO. OF DIMENSIONS** DISTRIBUTION OUTGOING (MM) BOARD TP WAYS H W D CAT. NO. 713.5 00.0 131.5 BT20 6 767.5 00.0 131.5 BT206 8 821.5 00.0 131.5 BT208 12 929.5 00.0 131.5 BT212 16 1037.5 00.0 131.5 BT216 2 1350.0 560.0 155.0 BT22 **For detailed dimensions see page 11. B TYPE INSTAER FITTED INCOMER KITS FOR 125A AND 200A BOARDS COPPER CABE INCOMING DEVICES CAPACITY CAT. NO. 100A Terminal Block Kit 50mm 2 BT13TK 100A SPSN Switch-Disconnector Kit 50mm 2 BT11SK 100A TP Switch-Disconnector Kit 50mm 2 BT13SK 100A TPSN Switch-Disconnector Kit 50mm 2 BT1SK 125A TP Switch-Disconnector Kit 70mm 2 BT1253SK 100A RCCB 30mA 50mm 2 BTRS30K 100A RCCB 100mA 50mm 2 BTRS100K 100A RCCB 300mA 50mm 2 BTRS300K 100A TP Switch-Disconnector Feeding 100A TP AC1 Contactor c/w Control Circuit Fuse & Terminal Block Housed in Extension Box _ BT1003CC INSTAER FITTED INCOMER KITS FOR B TYPE 200A BOARDS ONY COPPER CABE INCOMING DEVICES CAPACITY CAT. NO. 200A TP ugs Kit 120mm 2 BT23TK 200A TP Switch-Disconnector *120mm 2 BT23SK 160A TP Switch-Disconnector 70mm 2 BT1603SK 200A TP MCCB Kit (For F frame MCCB s up to 200A) 120mm 2 BT23MK 200A SPSN Switch-Disconnector Kit includes Extension Box) 120mm 2 BT21SK Connecting Bars 100A Neutral Terminal Block 50mm 2 200A Neutral ug Terminal 120mm 2 Neutral Bar Outgoing 25mm 2 Earth Terminal Block 50mm 2 Earth Bar Outgoing 25mm 2 * Switch-Disconnector and MCCB clamp terminals 95mm 2. Kit includes adaptor lugs for 120mm 2. Add suffix P when these are to be fitted to BT22. 16mm 2 for some terminals on 12 and 16 way boards. Enclosure Earth Terminal Bolt M8. 200A Switch-disconnector locking device Cat. No. TF2 plus padlock P1253. TP F FRAME MCCBS, ICU 25KA, ICS 100%, FOR USE WITH BT23MK 8 RATING 100A 125A 160A 200A MCCB CAT. NO. TF1003 TF1253 TF1603 TF2003
A & B Type SPSN Distribution Boards (IPX) INSTAER FITTED INCOMERS SPSN boards are supplied with two busbars and labelled for use on single phase and switched neutral (SPSN) systems for use with single pole and switched neutral s or RCBO s (see pages 12 and 13). Alternatively, by using the labels supplied, the board can be over labelled for use on two phase systems for use with DP 's. (NB: SPSN RCBO's must not be used on two phase systems). A TYPE SINGE POE AND SWITCHED NEUTRA BOARDS WITHOUT INCOMING DEVICE Installer fitted incomers can be selected from the table on page 5. NO. OF SPSN OR DP OUTGOING DIMENSIONS* DISTRIBUTION SPSN OR DP (MM) BOARD WAYS H W D CAT. NO. 5 261.5 36.0 13.0 ATDP105 8 261.5 5.0 13.0 ATDP108 SP Blanking Module TSPB; Door Key ocking Kit ATDK; Door Padlocking Kit ATPK. *For detailed dimensions see page 6. For terminal capacities see page 5. SPSN OUTGOING WAY CONFIGURATION PUS INSTAER FITTED INCOMER FROM PAGE 12. 5 N N 3 N 2 N 1 N 8N7N6N5NN3N2N1N DP OUTGOING WAY CONFIGURATION PUS INSTAER FITTED INCOMER FROM PAGE 12. 5 5 3 3 2 2 1 1 8 8 7 7 6 6 5 5 3 3 2 2 1 1 B TYPE SINGE POE AND SWITCHED NEUTRA BOARDS WITHOUT INCOMING DEVICE Installer fitted incomer kits can be selected from the table on page 8. NO. OF NO. OF SPSN OR DP OUTGOING OUTGOING DIMENSIONS** DISTRIBUTION SPSN DP (MM) BOARD WAYS WAYS H W D CAT. NO. 5 6 551.5 00.0 12.5 BTDP206 11 12 659.5 00.0 12.5 BTDP212 17 18 767.5 00.0 12.5 BTDP218 23 2 875.5 00.0 12.5 BTDP22 SPSN OUTGOING WAY CONFIGURATION SPSN SPSN SPSN N N N N N Blank SPSN SPSN Blank SP Blanking Module TSPB; Door Key ocking Kit BTDK; Door Padlocking Kit BTPK. ** For detailed dimensions see page 11. For terminal capacities see page 8. SPSN OUTGOING WAY CONFIGURATION DP DP DP 1 1 1 1 1 1 DP DP DP 9
B TYPE TPN Distribution Boards IPX 125A B TYPE DIMENSIONS M6 Keyhole fixings 125A B TYPE DIMENSIONS (MM) DISTRIBUTION BOARD A B CAT. NO. 03.0 97.5 BT10, BT101 57.0 551.5 BT106, BT1061, BT15E2 511.0 605.5 BT108, BT1081 673.0 767.5 BT112, BT1121 673.0 767.5 BT15E3 781.0 875.5 BT116, BT1161 727.0 821.5 BTS8, BTS66, BTS8 10
B TYPE TPN Distribution Boards IPX 200A B TYPE DIMENSIONS M6 Keyhole fixings * Extension box included in 200A Switch-Disconnector and F Frame MCCB kits. See Page 8. WITH 200A SWITCH-DISCONNECTOR/ WITH 200A UGS KIT (BT23TK) F FRAME MCCB KITS, STANDARD 200A BOARD OR ANY 160A INCOMER KIT BT21SK, BT23SK OR BT23MK* A B C A B C CAT. NO. 57.0 551.5 57.0 579.5 713.5 BT20, BTDP206 511.0 605.5 511.0 633.5 767.5 BT206 565.0 659.5 565.0 687.5 821.5 BT208, BTDP212 673.0 767.5 673.0 795.5 929.5 BT212, BTDP218 781.0 875.5 781.0 903.5 1037.5 BT216, BTDP22 BT22 = 1350mm H x 560mm W x 155mm D 11
Miniature Circuit Breakers 20V/15V AC FEATURES Conform to BS EN 60898 (IEC 898) Add on RCD pod available Wire in - Wire out design Suitable for Talisman Plus distribution boards All MCCB s suitable for DIN rail mounting Trip free mechanism Positive contact indication Terminal capacity 25mm 2 SP terminal shield Cat.No. TTSH1 Dolly locking device Cat.No. TD1 Padlock for above Cat.No. P1252 SP blanking module Cat.No. TSPB 1A TO 63A, TYPES B, C AND D TO BS EN 60898 (IEC 898) Talisman Plus Wire In-Wire Out Miniature Circuit Breakers Talisman Plus current limiting 10kA s are available from 1A to 63A in types B, C or D with SP, SPSN, DP or TP configurations. Units incorporate a trip free mechanism to prevent s from being held in the ON position. Talisman Plus wire in-wire out s are designed for mounting in Talisman Plus distribution boards. However, the breakers are also suitable for mounting on DIN rail, with comb busbars and/or individual wiring. The breakers listed are standard 10kA s @ 20V/15V AC. They have also been tested for DC fault levels @ 2V DC 6kA and 120V DC ka. Talisman Plus s are thermally calibrated to 0 C as standard, with a 50 C calibration also available on request. SINGE POE 10KA 1A TO 63A NOM. TYPE B TYPE C TYPE D RATING (3-5 X In) (5-10 X In) (10-20 X In) AMPS CAT. NO. CAT. NO. CAT. NO. 1 THB011 THC011 THD011 2 THB021 THC021 THD021 THB01 THC01 THD01 6 THB061 THC061 THD061 8 THB081 THC081 THD081 10 THB101 THC101 THD101 13 THB131 THC131 THD131 16 THB161 THC161 THD161 20 THB201 THC201 THD201 25 THB251 THC251 THD251 32 THB321 THC321 THD321 0 THB01 THC01 TD01* 50 THB501 THC501 TD501* 63 THB631 THC631 TD631* SPSN 10KA 1A TO 63A NOM. TYPE B TYPE C TYPE D RATING (3-5 X In) (5-10 X In) (10-20 X In) AMPS CAT. NO. CAT. NO. CAT. NO. 1 THB011N THC011N THD011N 2 THB021N THC021N THD021N THB01N THC01N THD01N 6 THB061N THC061N THD061N 8 THB081N THC081N THD081N 10 THB101N THC101N THD101N 13 THB131N THC131N THD131N 16 THB161N THC161N THD161N 20 THB201N THC201N THD201N 25 THB251N THC251N THD251N 32 THB321N THC321N THD321N 0 THB01N THC01N TD01N* 50 THB501N THC501N TD501N* 63 THB631N THC631N TD631N* DOUBE POE 10KA 1A TO 63A NOM. TYPE B TYPE C TYPE D RATING (3-5 X In) (5-10 X In) (10-20 X In) AMPS CAT. NO. CAT. NO. CAT. NO. 1 THB012 THC012 THD012 2 THB022 THC022 THD022 THB02 THC02 THD02 6 THB062 THC062 THD062 8 THB082 THC082 THD082 10 THB102 THC102 THD102 13 THB132 THC132 THD132 16 THB162 THC162 THD162 20 THB202 THC202 THD202 25 THB252 THC252 THD252 32 THB322 THC322 THD322 0 THB02 THC02 TD02* 50 THB502 THC502 TD502* 63 THB632 THC632 TD632* * 6kA Rating TRIPE POE 10KA 1A TO 63A NOM. TYPE B TYPE C TYPE D RATING (3-5 X In) (5-10 X In) (10-20 X In) AMPS CAT. NO. CAT. NO. CAT. NO. 1 THB013 THC013 THD013 2 THB023 THC023 THD023 THB03 THC03 THD03 6 THB063 THC063 THD063 8 THB083 THC083 THD083 10 THB103 THC103 THD103 13 THB133 THC133 THD133 16 THB163 THC163 THD163 20 THB203 THC203 THD203 25 THB253 THC253 THD253 32 THB323 THC323 THD323 0 THB03 THC03 TD03* 50 THB503 THC503 TD503* 63 THB633 THC633 TD633* 12
Miniature Circuit Breakers 20V/15V AC HRC FUSE MODUE, SINGE POE 16KA FOR BS 1361 HRC FUSEINKS NOMINA HRC FUSE RATING MODUE WIDTH REPACEMENT SP MODUE AMPS FUSES CAT. NO. 5 x 1 outgoing way BD0505C THM05 10 x 1 outgoing way BD1510C THM10 15 x 1 outgoing way BD1515C THM15 20 x 1 outgoing way BD1520C THM20 30 x 1 outgoing way BD3030C THM30 35 x 2 outgoing ways BD535C THM35** 0 x 2 outgoing ways BD50C THM0** 5 x 2 outgoing ways BD55C THM5** ** 35A 5A not to be fitted in top left hand position in B style boards. FEATURES One spare fuselink can be stored within the fuse carriage Terminal capacity 25mm 2 35A, 0A and 5A units are two modules wide RCBO S COMBINED /RCD UNITS TO BS EN 61009 INSTAER FITTED RCD POD RCBO S COMBINED /RCD UNITS TO BS EN 61009 INSTAER FITTED RCD PODS Any SP or SPSN Talisman Plus, 1A to 63A, types B, C or D can be converted into an RCBO by the addition of an RCD pod. Installer fittable units can be supplied in sensitivities from 30mA to 300mA time delayed. Simple installation instructions are supplied with the units. An RCBO however, cannot be converted back into an. POD POD POD POD SENSITIVITY SENSITIVITY SENSITIVITY SENSITIVITY 30MA 100MA 100MA 300MA TIME DEAYED TIME DEAYED CAT. NO. CAT. NO. CAT. NO. CAT. NO. TS30 TS100 TS100T TS300T FACTORY FITTED RCD POD RCBO S COMBINED /RCD UNITS TO BS EN 61009 FACTORY FITTED RCD PODS Can be ordered in the same sensitivities as installer fitted units. Select an from opposite page and add RCD Pod suffix from table below. ADD SUFFIX ADD SUFFIX ADD SUFFIX ADD SUFFIX ADD SUFFIX S10* S30 S100 S100T S300T TO TO TO TO TO *10mA pods must not be fitted to 0A, 50A or 63A s STANDARD FACTORY FITTED RCBO CONFIGURATIONS NOMINA RATING SP RCBO TYPE C, 10MA CAT. NO. SP RCBO TYPE C, 30MA CAT. NO. 6A THC061S10 THC061S30 10A THC101S10 THC101S30 16A THC161S10 THC161S30 20A THC201S10 THC201S30 32A THC321S10 THC321S30 0A THC01S30 CABE CAPACITIES OUTGOING DEVICES CABE CAPACITY s 25mm 2 RCBO s 25mm 2 HRC Fuse Modules 25mm 2 13
Accessories A AND B TYPE BOARD INKING KITS BOARD INKING KITS A TYPE B TYPE EXTENDED OUTGOING WAYS CAT. NO. CAT. NO. 100A Vertical Connection Kit ATBCK** BTBCKV 100A Horizontal Connection Kit BTBCKH **An Incomer is also required for A type board linking kits, see Incomers on page 5. An Incomer kit is also required for vertical board linking kits, see page 8. SPARE END PATES FOR A & B TYPE BOARDS AND IP2 & IP3 BOARD CONVERSION END PATES A TYPE A TYPE NO. OF STANDARD IP2 OUTGOING END PATE END PATE WAYS CAT. NO. CAT. NO. AT1GP AT12GP 7 AT2GP AT22GP 10 AT3GP AT32GP 13 ATGP AT2GP* 16 AT5GP AT52GP *AT2GP when fitted to B type boards offers IP3. B TYPE B TYPE NO. OF STANDARD IP3 OUTGOING END PATE END PATE WAYS CAT. NO. CAT. NO. 6 8 BTGP AT2GP* 12 16 ADDITIONA EARTH TERMINAS Type B, TPN distribution boards are supplied as standard with the number of earth terminals shown in the table. If required this can be increased by additional earth bars Cat. NO. BTNE8 or BTNE16 - see table: DISTRIBUTION TOTA TOTA TOTA BOARD CAT. NO. NUMBER OF EARTH NUMBER OF EARTH NUMBER OF EARTH TERMINAS FITTED TERMINAS IF 2 OFF TERMINAS IF 2 OFF AS STANDARD BTNE8 ADDED BTNE16 ADDED BT10, BT101 16 28 N/A BT20 16 28 52 BT106, BT1061 22 28 N/A BT206 22 28 52 BT108, BT1081 28 N/A N/A BT208 28 N/A 52 BT112, BT1121 0 N/A N/A BT212 0 N/A 52 BT116, BT1161 52 N/A N/A BT216 52 N/A N/A 1
Accessories DOOR OCKING KITS A TYPE AND B TYPE A TYPE B TYPE DOOR OCKING KITS CAT. NO. CAT. NO. Door Padlocking Kit ATPK BTPK Door Key ocking Kit ATDK BTDK Padlock for use with Door Padlocking Kit. Cat. No. P1250. B TYPE CABE SPREADER BOXES CABE BOX HEIGHT 162mm 250mm CAT. NO. BT1X BT2X ACCESSORIES Single Pole Blanking Modules to protect unused ways Single Pole Terminal Shroud to protect terminations Single Pole Terminal Screw Shield to protect screws Dolly ock to prevent inadvertent operation of any or RCBO Padlock for TD1 SP Terminal Block DP Terminal Block TPN SPN B type board Conversion Kit For use with Terminal Block/ugs Incomer Kits CAT. NO. TSPB TTSH1 TTSS1 TD1 P1252 T11TB T12TB BTSC A TYPE BOARD DIN RAI CONVERSION KITS To convert an A type board to accept busbar mounted devices and DIN rail mounted devices in the same enclosure with the use of a conversion kit. Identify the board you wish to convert, pick the combination of busbar ways to DIN rail modules. An incoming device can then be selected to isolate the busbar ways, see page 5. A TYPE CONVERSION KITS FOR ACCOMMODATION OF DIN RAI MOUNTED AUXIIARY DEVICES STANDARD BOARD DIN RAI NO OF DIN RAI TO BE CONVERTED MODUE CAPACITY SP WAYS ON CONVERSION KIT CAT. NO. (SP = 1X) BUSBAR CAT. NO. AT10 3X ATBK AT110 6X ATBK AT110 3X 7 AT7BK AT113 9X ATBK AT113 6X 7 AT7BK AT113 3X 10 AT10BK AT116 9X 7 AT7BK AT116 6X 10 AT10BK AT116 3X 13 AT13BK 15
Residual Current Circuit Breakers FEATURES Sensitivities from 30mA to 300mA time delayed Units conform to BS EN 61008 Flag indicators for Positive Contact Indication SPSN version capable of sensing DC components in supply Generous cable capacities up to 50mm2 SPSN units suitable for 20V 50/60 Hz applications TPSN units suitable for 15V AC applications have comb busbar facilities SPSN & TPSN 2 POE SPSN RCCB s COPPER 30MA 100MA 100MA 300MA 300MA NOMINA CABE SPSN RCD SPSN RCD SPSN RCD SPSN RCD SPSN RCD RATING CAPACITY CAT. NO. CAT. NO. TIME DEAYED CAT. NO. TIME DEAYED CAT. NO. CAT. NO. 100A 50mm 2 R1002S30 R1002S100 R1002TS100 R1002S300 R1002TS300 RCD padlock attachment (2 pole) Cat. No. RD2 plus padlock Cat. No. P1252. POE TPSN RCCB s NOMINA COPPER POE 50MM 2 30MA 100MA 300MA 300MA RATING CABE CABE ADAPTOR TPSN RCD TPSN RCD TPSN RCD TIME DEAYED CAPACITY CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO. 100A 35mm 2 RAK50 R100S30 R100S100 R100S300 R100TS300 16
Enclosures MOUDED ENCOSURES INGRESS MODUE PROTECTION CAPACITY RATING (SP = 1X) DESCRIPTION CAT. NO. IP55 X 35mm DIN Rail TE IP55 6X 35mm DIN Rail 6TE METACAD A TYPE DIN RAI ENCOSURES INGRESS MODUE PROTECTION CAPACITY RATING (SP = 1X) DESCRIPTION CAT. NO. IPX X 35mm DIN Rail ATE IPX* 6X 35mm DIN Rail AT6E IPX* 9X 35mm DIN Rail AT9E IPX* 12X 35mm DIN Rail AT12E IPX* 15X 35mm DIN Rail AT15E IPX* 18X 35mm DIN Rail AT18E Door key locking kit ATDK; door padlocking kit ATPK. For dimensions see page 6. * IP2 conversion kit available on request. METACAD B TYPE DIN RAI ENCOSURES INGRESS MODUE PROTECTION CAPACITY RATING (SP = 1X) DESCRIPTION CAT. NO. IPX 35mm DIN Rail 30X IP3 on Request (2 Rails) BT15E2 IPX 35mm DIN Rail 5X IP3 on Request (3 Rails) BT15E3 Door key locking kit BTDK; door padlocking kit BTPK. For dimensions see page 10. BT15E2 and BT15E3 are supplied with neutral & earth terminals; positions exist at each side of each DIN rail, to fit either neutral or earth terminals, which are available as follows: 15 hole shrouded neutral bar Cat. No. BT15EN. 15 hole earth bar Cat. No. BT15EE. AT15E, BT15E2 & BT15E3 enclosures can also be mounted onto any B type distribution board. 17
Contactors and Digital Timers CONTACTORS 50HZ CONTRO CIRCUIT 230/20V When several contactors are mounted it is advisable to fit a blanking module Cat. No. TSPB, every 2 contactors. AC 1 MODUE CONTACTS CONTACT WIDTH CONTACTOR RATING (SP = 1X) CAT. NO. Single Pole 20V 50Hz 16A 1X TC1 Changeover 1 N/O, 1 N/C Pole 20V/15V 50Hz 25A 2X TC2 N/O Pole 20V/15V 50Hz 25A 2X TC20 N/O Pole 20V/15V 50Hz 0A 3X TC0 N/O Pole 20V/15V 50Hz 63A 3X TC3 N/O Suitable for DIN rail mounting. Terminal Capacities: TC1, TC2, TC20 = 6mm 2 TC3, TC0 = 25mm 2 TIMER, DIGITA QUARTZ 220V/20V, 50/60HZ Minimum Module Channels Prog. Width Timer 16A, c/o Time (SP = 1X) Cat. No. 1 Channel, Fully Programmable one c/o contact rated 1 Min. 2X TT1 16A resistive, 2.5A inductive @ 20V 50Hz.0 37.0 Suitable for DIN rail mounting. Terminal Capacity = 2 x 2.5mm2 A terminal cover and detachable fixing bracket provide the option of wall mounting. 18