Microscope systems for markerless IOL alignment during cataract surgery YOUR WAY TO PRECISE OUTCOMES 2D and 3D IOL guidance systems
2 YOUR WAY TO PRECISE OUTCOMES Drive minimum residual astigmatism for your patients with IOL guidance systems available from Leica Microsystems. You strive to deliver minimal residual astigmatism so your patient can be glasses-free after cataract surgery. When dealing with miniscule eye structures there is no room for inaccuracy. Markerless IOL guidance systems available from Leica Microsystems capture accurate eye measurements to deliver precise, dependable and dynamically optimized guidance information. The systems support you to avoid potential inaccuracies throughout the entire process from planning to positioning of the toric intraocular lens (IOL), helping you deliver the best possible patient outcome. The following TrueVision 2D and 3D IOL guidance systems are available from Leica Microsystems: > IOLcompass Pro - 2D markerless IOL guidance > 3D TrueGuide - 3D markerless IOL guidance PRECISE INPUT FOR PRECISE OUTCOME Accurate eye measurements are the foundation for accurate guidance which drives optimal patient outcome. > Full integration with some of the most accurate and trusted topographers > Data transfer via LAN, USB or Cloud* helps ensure precision is maintained both pre- and intra-operatively CONNECTED AND INTELLIGENT Eliminate manual steps and associated potential for inaccuracy > Automated eye-registration means no blue ink marking is required > If your plan changes in the OR the dynamic software automatically optimizes subsequent steps > Full data connectivity avoids manual input * in preparation
ACCURACY YOU CAN RELY ON Benefit from precise guidance without deviations caused by eye movement or cyclotorsion > Full range of intra-operative templates support you through each surgery stage > Templates remain stable and accurate with low latency due to sophisticated registration and active eye tracking
4 a few simple mouse clicks Capture accurate data via your choice of pre-operative topography device* Pre-operative planning software generates a customized surgical plan with target refractive outcome PRECISION FROM START TO FINISH Avoid manual steps and associated inaccuracies with seamless connectivity and automation throughout the entire cataract workflow. Precise input for precise outcome Precise lens alignment starts with precise reference images and measurement, which is why IOLcompass Pro and 3D TrueGuide are compatible with some of the most trusted and accurate pre-operative topographers*. > Select the topography device you trust most and be confident of seamless interfacing > The planning software generates a customized surgical plan with targeted, predicted residual astigmatism based on the precise data from your chosen topographer > Continue working with the high accuracy of your chosen pre-operative device all the way through the procedure thanks to full data connectivity *Compatibility with pre-operative devices i-optics Cassini 0culus Keratograph 5M Tomey OA-2000 (in preparation)
5 Large HD 2D or 3D touch-screen USB, LAN, or Cloud (in preparation) IOL guidance system integrated into your microscope visualization platform Work without interruption with wireless foot switch control of templates Connected and intelligent Traditional cataract surgeries include manual steps which are time-consuming and may open up the possibility of inaccuracy. IOL guidance systems available from Leica Microsystems are designed to eliminate these steps by offering an integrated, intelligent surgical workflow. > No need to worry if your plan changes during surgery, the powerful, dynamic software adjusts to changes and optimizes each subsequent step of the procedure > Automated eye registration makes time-consuming blue ink marking and the risk of blurring a thing of the past > Avoid manual data input as patient data and surgeon preferences are transferred digitally from topographer through the workflow Documentation and teaching simplified Live on-screen video and recording enhances collaboration in the OR and allows future sharing with students and peers as well as full documentation in patient files. > Live video and patient data can be simulataneously shown on the large HD touch-screen and recorded enabling the OR team and students to easily follow the surgery > Record in HD 2D or 3D (3D TrueGuide) with or without templates > Use video and captured still images for teaching and sharing with peers at seminars or online.
6 ACCURACY YOU CAN RELY ON Operate secure in the knowledge that you will be supported by stable, precise guidance data. Aligned from the start With IOLcompass Pro and 3D TrueGuide you can avoid potential sources of deviation from inaccurate registration of templates to the eye thanks to auto-registration. No blue dot marking is required as the software uses the pre-operative reference image to recognize patterns of the limbus and scleral blood vessel structures. Upon surgeon confirmation, the templates are automatically aligned to the live surgical image. A moving target During surgery the patient's eye moves. Without a guidance system it can be tricky to continually adapt to the changing position. Worry no longer! The sophisticated tracking system follows the eye in real-time for stable, precise guidance you can always count on. A template for every step A wide selection of precise guidance templates support you through every step of your cataract surgery. CCI / LRI The exact position and size of the incisions is displayed to enable a precise start to the procedure taking into account surgically induced astigmatism. Rhexis Displays the individually planned shape and size of the capsulorhexis to position the IOL along the optical or visual axis. Topography overlay Confirm positioning against a topography overlay which shows the exact curvature of the cornea. Axis Use the optimized target axis to ensure toric IOL aligment with the lowest predicted residual astigmatism.
7 YOUR CHOICE, YOUR WAY Choose 2D or opt for 3D and experience a new OR perspective working "heads-up". The software features of the IOL guidance systems available from Leica Microsystems and the OpenArchitecture design of the microscopes, make it easy to upgrade from 2D IOLcompass Pro to 3D TrueGuide whenever you wish. 2D IOLcompass Pro markerless IOL guidance Benefit from precise, reliable navigation assistance from planning to surgery with IOLcompass Pro. > View guidance templates on the large HD touch screen OR > Work with the guidance templates additionally injected into the eyepiece so you have all the information you need without moving your head > IOLcompass Blue, a simplified, economic guidance solution, is also available, providing templates based on manual data input and using your blue ink marks as alignment reference. 3D TrueGuide markerless IOL guidance from TrueVision All of the benefits of 2D guidance plus the additional advantages of working heads-up looking at a HD 3D screen: > Enjoy an immersive experience thanks to enhanced depth of field and fundus visualization > Work in an upright, comfortable position looking straight ahead > Support communication and teaching as all share the same 3D surgical view > Use the 3D screen as visualization center for your OR by additionally displaying data from third party imaging devices See the back page for a full product comparison
2015 by Leica Microsystems GmbH. Subject to modifications. LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH. TrueVision and TrueGuide are trademarks of TrueVision Systems, Inc. IOLcompass Pro, IOLcompass Blue and 3D TrueGuide software is manufactured by TrueVision Systems Inc. and distributed by Leica Microsystems. OVERVIEW OF IOL GUIDANCE SYSTEMS 2D IOL Guidance 3D IOL Guidance IOLcompass Blue IOLcompass Pro 3D TrueGuide Pre-operative planning Interfacing with pre-op topographers (see p.4 for compatibility) Digital data transfer from pre-op topographer to planning software, to microscope Templates CCI Incision, capsulorhexis, IOL centration and toric alignment Pre-OP image and topography overlay Tracking of templates to eye structures No need for corneal ink marking Touch-screen set-up and control Foot-switch / hand-switch control of templates Retro-fit to your Leica ophthalmic microscope (M822/M844 F40, Proveo 8) Facilitates working "heads-up" looking at a 3D screen All systems compatible with Cassini from i-optics, Keratograph 5M from Oculus, and OA-2000 from Tomey (in preparation). REGULATIONS AND STANDARDS Surgical microscopes Leica M844 F40, Leica M822 F40 and Proveo 8 with integrated TrueVision IOL guidance system: Council Directive 93/42/EEC on Medical Devices (MDD) and its amendments. Classification: Class I, in compliance with Annex IX, rule 1 and rule 12 of the directive. IEC 60601-1 / EN 60601-1 Medical Electrical Equipment, Part 1: General requirements including national differences of EU, CA, US. IEC 60601-1-2 / EN 60601-1-2 Electromagnetic Compatibility. The Medical Division, within Leica Microsystems (Schweiz) AG, holds the management system certificates for the international standards ISO 9001, ISO 13485, and ISO 14001 relating to quality management, quality assurance and environmental management. Leica Microsystems (Schweiz) AG Max Schmidheiny Strasse 201 CH-9435 Heerbrugg T +41 71 726 3333 F +41 71 726 3399 www.leica-microsystems.com CONNECT WITH US!