Mi SNMP Manager - User Manual NB : Windows 10 users Software detects unit but no values is coming through - click on search type Currency and select Control the way currency is handled, under advance settings change the digit separator from a,(comma) to a. (point) and save settings, values will now be displayed in SNMP Manager Software review: Download the full working version from www.microinstruments.co.za This Mi SNMP Manager download is fully featured version but limited to the monitoring of Two (2) devices for evaluation. To unlock the software please send an email to sales@microinstruments.co.za to purchase a license key @ R999.00 ex VAT. Mi SNMP Manager is a standalone Microsoft Windows SNMP (simple Network Management Protocol) software application to monitor all Remote power monitoring products manufactured by Micro Instruments. It will also be future compatible with all new products supporting SNMP. The Software application is locked on OID values used by our products and cannot be changed for easy plug and play integration with our products, thus a dedicated SNMP manager application specifically for Micro Instruments Remote monitoring products. No other brand or devices can be added to the system. Closed OID system
Features: Plug and Play setup only add the IP address from the connected unit and its ready to monitor the software will automatically detect the type of unit connected and populate the correct name and OID s for the device. Graphing each device added will have its own graphical presentation of all measured data and is unit specific. Email alerts Multiple email addresses can be added to the system for all alarm notifications via email Import and Export Easily import and export all devices & application settings for easy restore of all information. SUPPORTS : NPM-R10 / TCPIP V/A meter, Ethernet AC Monitor / Solar Smart R1 Solar regulator Home Screen Unlocking the software application
Click on Settings - activation Copy and paste the activation key into the window and click on activate
Add a new Device Click on File then add new device Enter the device IP address Enter Site Name where unit is installed Enter SNMP Read community read (default) leave at default Setup Email alerts for the unit if required for: Battery voltage / Temperature / Mains failure / Tamper Alarm alert. Set Battery volts minimum and maximum voltage level / adjust fine with keyboard arrows and set the Temperature alarm value. Emails will be generated to all participants in the email list if any of the settings is violated. Click on Add new device
Email Settings Click on Settings then Email Alert settings Enter Email information and send a test email There should be at least one email address in the MAIL Recipient list A test email should be received Email recipients should be added below each other each on a new line Email type can be specified as plain text emails or HTML emails which is more colorful with red for any type of alarm emails and green for any type of alarm restored emails Click Save Settings Email Alerts can be activated/de-activated for each unit individually.
SNMP Polling settings Click on Settings then SNMP Polling settings Defaults is loaded user can change values as desired Set SNMP Polling interval minimum 30 seconds Set SNMP request Time out Set SNMP request retry count Set device Ping Timeout time All parameters user adjustable Click Set Configuration
Monitoring Screen Example Monitoring screen indicates all parameters applicable to each device As devices is added the software will arrange the list of devices alphabetically NPM R10 monitoring Mains status Battery1 to 4 voltage Battery Total voltage Charge current Load current Temperature Tamper Alarm External Voltage input and the status of Relay 4 and 5 TCPIP V/A meter monitoring Battery 1 to 4 voltage Total Battery voltage - Charge current and if no charge source the discharge current into the load
Graphing NPM-R10 graphing of Battery volts total Charge current Load current and Temperature TCPIP V/A meter graphing of Battery volts Total and charge/discharge current Graphing hours is customer configurable.
Alarm conditions In the event of an alarm, any parameter that caused the alarm like the Tamper Alarm or battery low voltage level and all other user defined alarms will be displayed in BOLD text for easy indication of the fault that caused the alarm Alarm email will be send for any violation of user defined settings
Alarm Restored email will be send as soon as alarm is restored Alarm emails will specify the device IP Address, unit type, Site name and type of alarm Battery low Alarm email example
Battery low Alarm restored email example Device went Offline after being online - email
Device back online after being offline - email For more information please contact info@microinstruments.co.za Thank you for choosing Micro Instruments as your trusted Remote Network monitoring partner.