New Product Announcement: AC2000 v7.1 Integrations CEM Systems is pleased to announce the release of the latest integrations update for AC2000 v7.1 suite of access control and security management software as well as a number of hardware updates. AC2000, AC2000 Airport and AC2000 Lite are now available with a new range of integration interfaces that increase the performance, simplicity and scope of the system. Integration at a glance Aimetis Symphony - AC2000 now supports full integration of Aimetis Symphony. Aimetis Symphony, highly scalable, easy to set up and use, can be used in a single server installation and multi-server deployments. Avigilon Control Center - AC2000 now supports full integration to Avigilon Control Center (CC). Avigilon CC is a simple-to-use video management software that is able to efficiently capture, manage and store high-definition surveillance video while intelligently managing bandwidth and storage. Morpho BioBridge - BioBridge is an enrollment and synchronization middleware that overlays enrollment and demographic synchronization between MorphoManager and AC2000 Visual Image Pass Production (VIPPS). BioBridge is not dependent on the underlying technology platform required for integration. Hardware at a Glance DESFire EV2 - CEM Systems DESFire readers now support DESFire EV2. The second evolution of MIFARE DESFire open architecture platform for smart cards offers superior performance, state-of-the-art security, privacy and enhanced multi-application support. HID Mobile Access - CEM Systems can now supply HID mobile credentails and card readers as part of our overall access control solution. HID readers are connected back to AC2000 via CEM Systems card readers or door controllers, S6x0, emerald, DCM300, and DCM350 (OSDP) range. MorphoAccess & Morpho 3D Face Reader Terminal - The AC2000 system now supports a wider range of MorphoAccess biometric identification terminals and the Morpho 3D Face Reader terminals.
AC2000 Integrations Aimetis Symphony - AC2000 features a high level interface with Aimetis Symphony, a softwarebased Video Management System (VMS) with native analytics. Aimetis Symphony is compatible with analog and IP cameras, encoders, DVRs and other video devices from a wide variety of manufacturers. Seamlessly integrate AC2000 with Aimetis Symphony VMS AC2000 high-level interface with Aimetis Symphony supports Preset-on-Alarm, Patternon-Alarm and forced camera recording on video action. These can be enabled and configured via the AC2000 Video Configuration Application or VMS. AC2000 events can trigger VMS video actions. Video actions can be customised using AC2000 video configuration, and are assigned to a camera such that when an AC2000 alarm on a CEM Systems card reader or PIR, AC2000 will trigger a recording on the VMS for the configured record duration and, if needed, trigger a preset or pattern tour on the camera. Associate access control alarms with digital video footage Playback alarm videos, take snapshots and download video clips of recorded and live footage View alarm videos as they occur, control the camera and alarms by priority in Video Popup Define video alarm actions in AC2000 DVR Video Configuration Display up to 16 individual camera feeds simultaneously using the Live Viewer Control pan, tilt, and zoom cameras and move to specific presets via AC2000 Trigger camera patterns on configured PTZ cameras Easy one step import of camera details directly from Aimetis Symphony VMS
Avigilon Control Center - The AC2000 Avigilon Control Center (CC) video interface enables AC2000 to act as a flexible and fully integrated Security Management System (SMS). The AC2000 Avigilon CC video interface provides the ability to define video alarm actions, view live footage as alarms occur, control cameras and run camera presets. The AC2000 DVR Video Configuration module seamlessly integrates AC2000 with Avigilon CC NVR s. This will give operators the ability to define video alarm actions, search alarm feeds and playback recorded video from alarms, providing a fully integrated solution. Seamlessly integrate AC2000 with Avigilon Control Center Network Video Recorders (NVR s) Associate access control alarms with digital video footage Playback alarm videos, take snapshots and download video clips of recorded and live footage View alarm videos as they occur, control the camera and alarms by priority in Video Popup Define video alarm actions in AC2000 DVR Video Configuration Display up to 16 individual camera feeds simultaneously using the Live Viewer Control pan, tilt, and zoom (PTZ) cameras and move to specific presets via AC2000 Trigger camera patterns on configured PTZ cameras Easy one-step import of camera details directly from Control Center NVR s
Morpho BioBridge - Morpho BioBridge is a synchronisation middleware that enables cardholder details to be seamlessly shared between the AC2000 platform and MorphoManager software. Cardholder data now only needs to be added into your AC2000 database. This information will then automatically be populated within the MorphoManager system, eliminating the need for data duplication. Cards will still be validated on AC2000 but now you can use the MorphoManager to search for AC2000 cardholders and capture their biometric across Morpho s full range of biometric readers. This synchronisation can greatly save on system administration and duplicate data entry between AC2000 and MorphoManager.
Hardware Updates DESFire EV2 - The second evolution of the industry-leading MIFARE DESFire open architecture platform for smart cards offers superior performance, state-of-the-art security, privacy and enhanced multi-application support to enable new business models. The new MIFARE DESFire EV2 platform further increases flexibility. Compared to MIFARE DESFire EV1, a MIFARE DESFire EV2 chip can hold as many different applications as the memory size supports and new applications can be loaded after the card has been deployed into the market. A purse (what is a purse?) can even be shared between applications, for greater interoperability. For a truly convenient touch-and-go experience, MIFARE DESFire EV2 offers increased operating distance compared to previous versions. The 70 pf option enables read range optimizations of small antenna form factors. MIFARE DESFire EV2 delivers the perfect balance of speed, performance and cost efficiency. It is also fully compatible with the existing CEM Systems MIFARE/DESFire readers. With MIFARE DESFire EV2, data transfer rates up to 848 Kbit/s can be achieved, making fast data processing possible. HID Mobile Access (SEOS) - HID Mobile Access is a service and centres around a cloud-based portal, provided by HID. This portal enables the provision, revocation and management of all Mobile IDs, the registration of users and of their mobile devices. It allows flexible access via any web-enabled computer or tablet. A Mobile ID is a virtual credential stored on a smartphone. You can store multiple Mobile IDs on a single device, securely. Mobile IDs cannot be copied or transferred. Mobile IDs can be revoked in real time, remotely. HID's Mobile Access App is available for ios 7.0 and above, and Android 4.3 and above. The app is available for free via the respective platform stores and supports all major ios and Android-based smartphones. HID readers have the ability to support Mobile IDs as well as conventional credentials, such as cards. Readers can support HID Mobile Access via both NFC and Bluetooth SMART.
Two opening modes: Tap mode for close range Twist and Go gesture for longer range HID Mobile readers can be easily connected back to any CEM Systems card reader or door controller over the Wiegand or OSDP interface. Mobile credentials are enrolled like any other card on AC2000 using online validation reader. Increased flexibility - HID Readers support both cards and Mobile IDs - Mobile Access complements your existing AC2000 solution Platform independence - App available on both ios and Android - Solution works globally across all Mobile Network Operators - Web-based Mobile Access portal interface Ease of use - A single device solution that carries multiple keys - Fewer items to carry - Converged functionality with a device that never leaves your side - Benefit from extended read ranges without the need for obtrusive readers - Works without cellular coverage to authenticate MorphoAccess SIGMA Fingerprint Terminal The MorphoAccess SIGMA Fingerprint Terminal is tailored for both access control and Time & Attendance applications, the MorphoAccess SIGMA Series implements no fewer than 20 patents to master biometric identification and delivers key security features together with a unique user experience. - Time & Attendance features - Tablet-like user experience - 1:10,000 user identification in 1 second - High capacity: 30,000 templates, 250,000 IDs in authorized user list, 1 Million logs - Anti-fraud features: fake finger detection, duress finger, timed anti-pass back - Flexibility: Prox, iclass or MIFARE/DESFire/NFC contactless card reader as an option - IP65-rated design
MorphoAccess SIGMA Lite Fingerprint Terminal The MorphoAccess SIGMA Lite terminals are specifically designed to equip narrow mounting surfaces, such as glass/aluminium door mullions, turnstiles, or server rack doors. With two designs and multiple card reader options, there are a variety of models to address the widest range of deployment scenarios, both indoor and outdoor. - 1:10,000 user identification in 1 second - High capacity: 30,000 templates, 250,000 IDs in authorized user list, 1 Million logs - Embedded Web Server for on-device enrolment, terminal configuration and transaction log retrieval - Anti-fraud features: fake finger detection, duress finger, timed anti-pass back - Flexibility: Prox, iclass or MIFARE/DESFire/NFC contactless card reader as an option - Tough design: IP65-rated and vandal resistant (IK08) Morpho 3D Face Reader Terminal The Morpho 3D Face Reader terminals provide hands-free access control that is highly secure and as simple as a quick glance to the terminal. By analyzing the three-dimensional structure of the user s face, it achieves extremely accurate matching while ensuring high throughput. - High capacity: 3,000 users in identification mode, 100,000 users in verification mode, 1 Million transaction log storage - The real-time 3D imaging technology enables sub-second matching - The embedded matching engine analyzes the structure of the face (using over 40,000 data points), thus improving accuracy compared with 2D technologies - Enhanced accuracy enables low False Acceptance Rate while maintaining high throughput and productivity - Conventional 2D facial images can t be used to duplicate a face and spoof the system - Accommodates a range of facial positions (angles, motion) and poor lighting conditions (night & day vision) - The use of invisible light makes the technology non-intrusive - Acquisition is hands-free and contactless, i.e. ideal for environments requiring gloves or where there are hygiene concerns
Frequently Asked Questions Aimetis Symphony What version of AC2000 is Aimetis Symphony supported on? Aimetis Symphony is supported on AC2000 v7.1. Please check with your CEM Systems account manager for support on other versions and before upgrading your system to ensure compatibility. What version of Aimetis Symphony does this interface support? CEM Systems wrote this interface against Aimetis SDK v6.14.0.0 which supports Aimetis Symphony v6.14 software. Please contact your Aimetis account manager before you upgrade your Aimetis software to ensure compatibility. Can I see camera alarms in AC2000 Security Hub? Yes, you can see motion, tampering etc. Note that you can only see Activity events as alarms, the actual video alarms need to be set up as policies for each individual camera. You can also see some alarms from NVR such as Loss/Gain alarms. Do I need a license key to use Aimetis Symphony on AC2000 Video Viewer and Security Hub? Yes, you need to apply a license to your AC2000 server. Please contact your Aimetis Symphony account manager to confirm if any additional license is required on the Aimetis side. Frequently Asked Questions Avigilon Control Center What version of AC2000 is Avigilon Control Center supported on? Avigilon Control Center is supported on AC2000 v7.1. Please check with your CEM Systems account manager for support on other versions and before upgrading your system to ensure compatibility. What version of Avigilon Control Center does this interface support? CEM Systems wrote this interface against Avigilon Control Center SDK v5.8.0.28 which supports Avigilon Control Center v5 software. Please contact your Avigilon Control Center account manager before you upgrade your Avigilon Control Center software to ensure compatibility. Can I see camera alarms in AC2000 Security Hub? Yes, you can see motion, tampering etc. You also see some alarms from NVR such as Loss/Gain alarms. Do I need a license key to use Avigilon Control Center on AC2000 Video Viewer and Security Hub? Yes, you need to apply a license to your AC2000 server. Please contact your Avigilon Control Center account manager to confirm if any additional license is required on the Avigilon Control Center side.
Frequently Asked Questions Morpho BioBridge What version of AC2000 is Morpho Bio Bridge supported? Morpho BioBridge is supported at AC2000 v7.1 and above. What version of Morpho Manager is required for Morpho BioBridge? MorphoManager v9.5.5 and above. Is the information sent from AC2000 to Morpho Manager sent in real time? The Morpho BioBridge interface polls the AC2000 database on a scheduled basis to pull cardholder information directly into the MorphoManager database. The data synchronisation intervals are fully configurable to specify when data is pulled from the AC2000 database via the Morpho BioBridge in one minute intervals. What information is sent to Morpho Manager from AC2000? Information sent across BioBridge is the minimum requirements for Morpho Manager Enrollment: First Name Surname Personnel Serial Number Access Level Card Number Card Status Future record updates Do I need a validation reader for AC2000 and for MorphoManager? Yes, you will need to ensure you have a validation reader for AC2000 enrollment and also a Morpho Biometric desktop enrollment reader for biometric capture. Do I need two separate network points at the door for Morpho readers and CEM Systems readers? Yes, Morpho readers will receive biometric templates directly from the MorphoManager database across TCP/IP network. Once biometric templates have been verified, the card number will be sent to the CEM Systems hardware over Wiegand for identification. The CEM Systems reader/controller will send the card number up to AC2000 database over TCP/IP. Once matched, the CEM Systems reader/controller will deny or allow access through the door. What Moprho biometric terminals are supported? CEM Systems currently can provide the following supported readers: SIGMA Series SIGMA Lite Series 3D Face Reader Can CEM Systems supply MorphoManager and readers to me? Yes, CEM Systems can provide a quotation for a complete solution.
Frequently Asked Questions DESFire EV2 What CEM Systems readers support DESFire EV2 cards? All CEM Systems readers can read DESFire EV2 cards. DESFire EV2 is completely backwards compatible with existing DESFire technology readers. Do I need to do anything if I already have existing DESFire EV1 cards? No, CEM Systems will gradually phase out DESFire EV1 cards to DESFire EV2 cards and will have no impact on existing or new customers. Frequently Asked Questions HID Mobile Access What version of AC2000 is HID Mobile Access supported? The CEM Systems HID Mobile Access solution is supported on all versions of AC2000. How do I order HID Mobile Access? You can order HID Mobile Access directly from newly distributed CEM Systems pricelist. As a minimum the following is required: One HID mobile reader One Bluetooth credential One Bluetooth admin card How to I manage the Bluetooth credentials? Bluetooth credentials are managed by the enduser. Once a Bluetooth reader credential is purchased, access to the HID cloud-based portal will be created. HID will send the username and password to access the portal directly to the end user. From the portal the credentials can then be distributed to mobile phones as required. Do I have to pay for the HID mobile portal? No, access to the portal is granted free of charge. How do I enroll my Bluetooth credential on AC2000? Enrollment of Bluetooth credentials is just like any other card, via either online enrollment or a dedicated S610 validation reader with the HID mobile reader connected. Can I re-use my mobile credential once it is returned? No, the HID mobile credentials can only be used once. If a phone is lost, stolen, replaced or an individual s card is no longer required, the credentials will be purged and new credentials must be purchased. Can my mobile reader also read standard smartcards? Yes, if configured to do so.
Product Code SWVINT-AIME SWVINT-AVIG CRD/218/204 CRD/218/208 CRD/633/XXXX CRD/634/XXXX HDS/055/10XX HDS/055/15XX HDS/055/40XX HDS/055/K4XX HDS/678/009 HDS/678/008 HDS/678/001 HDS/678/007 Description AC2000 Aimetis Symphony interface AC2000 Avigilon Control Center interface CEM Systems DESFire EV2 card 4k static key CEM Systems DESFire EV2 card 8k static key HID SEOS Mobile Credentials - custom mobile ID (Minimum order quantity is 100) HID SEOS Mobile Credentials - mobile admin card (Used to adjust Bluetooth range settings on mobile enabled iclass SE readers) HID iclass SE R10 Smart Card Bluetooth Reader HID iclass SE R15 Smart Card Bluetooth Reader HID iclass SE R40 Smart Card Bluetooth Reader HID iclass SE RK40 Smart Card Keypad Bluetooth Reader MorphoAccess Sigma Lite Bio-only for 500 users MorphoAccess Sigma Lite iclass with Bio for 500 users MorphoAccess Sigma Lite 125kHz Prox with Bio for 500 users MorphoAccess Sigma Lite Mifare/DESFire with Bio for 500 users For more information or details on ordering MorphoAccess SIGMA, MorphoAccess SIGMA Lite+ or Morpho 3D Face Reader, please email cem.info@tycoint.com or contact your account manager.