F-3000 connector family SFF reliable optic connections.
Outline Standard product and versions The F-3000 r and rs Available technologies and standards The F-3000 fusion 2
The connector 3
Features and benefits Spring-loaded protective cap for high power applications providing increased safety protection and strong reduction of dust and scratches of ferrule front-faces Specially designed body to prevent endface damage during mating Modular designed mating adapters with metal protective shutters for high power applications 4 Diamond composite ferrule (zirconia ceramic sleeve and titanium insert): Allows plastic deformation for our Active Core Alignment (A.C.A) Unique 0.1 db Insertion Loss Custom drill sizes from 80μm to 280μm Superior Ultra polishing Custom ferrules for multi-fiber technology Ultra-low ferrule O.D. tolerances
Connector family Simplex Duplex Backplane 4 and 2 channels 5 More about..
Connector versions F-3000 LIFT The ideal solution for special applications with difficult access F-3000 s Without protection cap and button make it suitable for almost all transceivers available on the market. 6
Available technologies and standards Available for MM and SM PC/APC PS optical interfaces: PS collimated, PSf free space, PM-PS, PSi Free standing, PSc collimator. Polarization Maintaining (PM) VIS/NIR for low wavelengths and small core fibers Optical Line Identification OLID assemblies F-3000 FUSION for easy field termination The F-3000 is standardized as LF3 connector, thus clarifying and ensuring the mechanical compatibility of the F-3000 connector with the LC adapter. IEC 61 754-28 Fiber optic interconnecting devices and passive components - Type LF3 connector family EN 50377-16-1 Product specification: Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category C The LF3 connector is compatible with all IEC 61 754-20 compliant adapters 7
Specifications for simplex, duplex, Backplane standard version Optical specifications Environmental conditions 8
Specifications for simplex, duplex, Backplane standard version Mechanical conditions 9
Mating adapters Three types, available with different clips: Simplex (screw and quick fixing clips) Duplex (quick, screw and screw 45,fixing clips) Junior (quick and screw fixing clips) Improves handling within high density panels With 12 colored frames for easy identification 10
F-3000 r and rs 1.25mm ferrule assembly Compact pre-connectorized system suitable to be blown into microducts, or to terminate Break-out cables of very reduced dimensions for easier installation into small ducts instead of using standard Break-out cables. 11 F-3000 r and rs simplex Easy and reliable solution to perform FTTx, LAN, Data processing Networks, Telecommunication Networks and other installations.
F-3000 r and rs, availability and features Available in MM and SM PC/APC, assembled as pigtail, patchcord or break-out No needs for field splicing Insertion Loss: typ. 0.25, max. 0.5 db Field termination kit with spare parts Available as cable on small light weight drums Factory manufacturing including measurement reports Functioning warranty and therefore no need for field measurement equipment 12
F-3000 Power Solution (PS) For high power applications up to 3 Watts optical power for SM fibers. To support high bitrates and long transmissions Based on contacted expanded beam technology To reduce power density (16x) 13
Further PS technologies PM-PS collimated Polarization Maintaining Contact Optical Interface PSf Free Space (Diverging) PSi Free Standing Non-Contact Optical Interfaces PSc Collimator System 14 DIAMOND SA 14/11/2016
F-3000 Polarization Maintainging (PM) F-3000 solutions to PM and polarizing (PZ) fibers for optimal control of the signal s polarization state. Low insertion losses (IL) High polarization extinction ratios (PER) High return losses (RL) Very broad spectral ranges Applications: Biomedicine Spectroscopy Metrology Sensorics Telecommunications Lasertechnology Surveillance & Security Lithography 15 More about..
F-3000 for VIS-NIR version Applications using non-telecom wavelength single mode and PM fibers exist in various sectors such as Biomedical, Measurement instruments, Laser source and delivery, sensing. DIAMOND offers the VIS/NIR optical interface for low wavelengths (405-1060nm) and small core fibers. Benefit using Diamond Active Core Alignment (ACA): Extremely low lateral offset for Low Insertion loss Ultra high polish for High return loss 16 More about..
F-3000 for OLiD Optical Line identification P2P Network stability and high levels of productivity! Characteristics and benefits: Based on Fiber Bragg Grating (FBG) technology. Fast search and identification process for installation errors and outages. To ensure a rapid troubleshooting process. FBG integration in traditional components (SOCs, Adapters, Pigtail/Patchcords, Outlets) Minimum space requirements. Allows a unique address to be assigned to each client. Fewer accesses to private premises required. 17 DIAMOND SA 14/11/2016 More about..
F-3000 Fusion for easy field termination For field assembling of F-3000 Splice On Connector (SOC) Termination with Diamond Zeus D50 Fusion Field Termination Kit. Available for SM and MM fiber (250μm, 600μm and 900μm) and cable (1.6-to 3.1 mm) in both 0 PC or 8 APC versions. Alberino Fusion 1.25mm (for F-3000 ) Features and benefits of Alberino Fusion Simple, fast and reliable field termination reduces operator error and cost per termination No need of glue Outstanding optical performance consistent and repeatable low IL (typ. 0.25dB) / high RL No polishing eliminates the need for costly consumables Fusion spliced pigtail performance and reliability without the cost and space associated with splice enclosures, trays and protectors 18
Zeus D50 Fusion Field Termination Kit. The splicer offers: Easy manual fiber adjustment Fast and user friendly connector on field termination Fiber-to-fiber splicing with precision "V-groove" alignment Pre-splice fiber cleaning function and adjustable arc-power Fast and easy replacement of electrodes no need for cleaning during field use Pre-programmed parameter for both MM & SM fibers Integrated fiber retention check Ferrule assembly closing directly onto fusion splice eliminates the need for special tools Up to 200 splices without recharging the battery Rechargeable battery (optional) USB port and external video output Fiber/cable preparation and splicing tool kit 19