Watch Instruction Manual

Watch Instruction Manual

CONTENTS WELLFIT Activation P. 1 Features P. 2 Important Note P. 3 Protecting Your Smart Watch from Water P. 4 Important Reminders P. 5-8 Getting Started P. 9 Contents P. 10 Using the Watch Functions P. 11-12 Battery Life and Charging P. 13 Critically Low Battery P. 14 Wellfit App P. 15-17 Proper Wearing P. 16 Sleeping Mode P. 18-20 Alarm & Pills Alarm Setting P. 21-22 Your Goal Setting P. 23 Setting the Notifications P. 24 Incoming Call Notifications P. 25 Phone Finder P. 26 Message Notifications P. 27 Selfie P. 28 Updating Your Wellfit P. 39-40 To Restart Your Wellfit P. 41 Battery and Memory P. 31 Care and Wearing Tips P. 32 Built-in Battery Precautions P. 33 Cautions P. 34

Press and hold the A button for 2 seconds to activate the watch A Button P. 1

FEATURES: LED display icons Japanese Movement Pedometer (Daily Goal Setting) Sleep Monitor Daily Alarm Pills Alarm Alert Notifications Incoming call notifications Message notifications Phone Finder Selfie Low Battery Indication Vibration Bluetooth 4.0 Compatible with ios7.0/ Android 4.3 & above USB Rechargeable Battery P. 2

IMPORTANT NOTE: Required Operating System: ios 7.0 / Android 4.3 and above and Bluetooth 4.0 Charge the unit prior to pairing and synchronization to your mobile. Go to Apple Apps stores or Google Play Store to download WellFit. Ensure your Bluetooth on your smart phone and smart watch has been enabled for pairing and synchronization. Device update: New firmware may be available for users to upgrade their app performance. Confirm firmware update, and the watch will reset after completion. Synchronize the watch with your mobile once again before using it. Pair with the unit and synchronize again or restart your smart phone, should synchronization fail (See full manual for more details). After firmware updates or your mobile s automatic software updates, the user should restart their phone if they are experiencing difficulty in pairing or synchronizing their activity tracker as these updates may need to be configured after restarting, before attempting to pair or sync again. To test the compatibility of the smartwatch app with different handsets, we have tested it with numerous Android smart phone market leaders and brands, and it has been fully functional. However, this compatibility may not be shared with lesserknown brands and Android operating systems. P. 3

PROTECTING YOUR SMART WATCH FROM WATER: Avoid exposing your Smart Watch to enviroments with excessive dust or moisture. Normal wear and tear along with damage to your watch can reduce its ability to resist dust & moisture. Do not use the watch in the below conditions: Never submerge your watch in salt water, expose it to any chemicals or to moist environments with extreme high or low temperatures. After using the watch in water, dry off the watch with soft cloth. All compatible accessories, including charger and cable are not waterproof and dust resistant on their own. P. 4

IMPORTANT REMINDERS: 1. The daily alarm and pills alarm should only be used when necessary, as heavy usage will shorten battery life. 2. It is recommended that all users take the necessary precautions to prevent the watch from coming in contact with sea water or concentrated salt liquids, as it can damage the sensitive components of the watch. 3. If you wish to have the most accurate fitness index calculated by the watch, please enter your personal user settings. 4. It is advisable to restart your phone once you have installed the WellFit app. 5. We do recommend users to sync their watch to the app as regularly as possible, but at least once every 2 to 3 days under normal usage. This is because when the activity tracker is out of battery, all the data stored will be erased. Under heavy usage, e.g. long tracking periods, more frequent synchronization is recommended. 6. The app requires the ios platform 7.0 or above and android platform versions 4.3 and above and Bluetooth 4.0 and above. Please do note that although many different brands may use the same android platform, the performance and compatibility of the app will come down to the company s own operating system. We can not guarantee the compatibil ity and performance of the app as their operating system may have altered the android platform, thus affect our app. P. 5

REMINDER continued... 7. Some of the mobile phone has a default for a particular Bluetooth device or numerous Bluetooth device, therefore, it may affect the synchronisation so you may have to pair and sync every time. 8. We also advise the user have to upgrade the firmware for the first time to pair and synchronise it. 9. The user can decide to upgrade the firmware any time to get better performance of the app. Please follow the steps below and on page 7. On the app (User Setting Mode) Press Setting then press update device P. 6

REMINDER continued... Press Check Firmware Press Upgrade Firmware P. 7

REMINDER continued... 10. Sit back and relax. After upgrading the firmware, the watch will reset and delete all data. User will need to sync the watch with the mobile once again. 11. If you experience difficult in synchronizing the tracker and the mobile phone after pairing through Bluetooth, it is advised you restart your mobile phone, and try to repeat the process again. 12. The users may have to pair or sync again because of the configuration change due to the updated of software in gad get firmware or mobile s software updates P. 8

GETTING STARTED Welcome to WellFit, the highperformance Fitness watch that will help you meet your fitness goals & also receive notifications. In order to make the best use of this device, please read the instruction manual carefully. Do not discard keep the manual for future reference. SETTING UP YOUR WellFit You can set up your watch using the WellFit app for ios 7.0 & Android 4.3 and above. SETTING UP YOU RE WellFit USING A MOBILE DEVICE Most of the mobile devices that support Bluetooth 4.0 technology will allow you to set up and wirelessly sync your tracker. You can download our free mobile app from Google Play Store & Apple App Store and follow the setup process. 3D SENSOR - MEASURES YOUR MOVEMENT ACCURATELY The 3D technology in the accelerator is an accelerometer sensor that detects and measures acceleration in walking. - 3D Sensor has intelligent step filter function, which only starts counting once the unit detects continuous movement for a period of time. P. 9

CONTENTS Getting Start Setting up your WellFit Setting up your WellFit using mobile device Using the watch function Installing WellFit Connect Pairing your watch Battery Life & Charging Setting the Time & Date Pedometer Mode Sleeping Mode Set the Smart & Pills alarm Tracking a daily goal Setting the Notification Incoming Call Notification Phone Finder Message Notification Selfie Update your WellFit Restart your WellFit General Info & Specifications Care and wearing tips Built-in battery precautions Caution P. 10

USING THE WATCH FUNCTIONS IMPORTANT! Before the unit is transported, the watch is switched off for energy saving purposes. Turn it on by holding the A button for 2 seconds. INSTALLING WellFit - SYNCING YOUR WellFit 1. Plug in the dongle to your computer via the USB cable and place your watch on the charging points to charge the unit 2. Ensure you have switched on the Bluetooth on the device you wish to pair your WellFit to. Scan for WellFit and pair it. 3. Go to the WellFit app and follow below steps to pair your watch. Hold the A button for 2 seconds to activate the Blue tooth. (the Blue tooth LED will lflash and vibrate for 2 times) Hold the A button for 5 seconds to deactivate the Bluetooth. (the Bluetooth LED will light up and vibrate for 2 seconds) A Button P. 11

USING THE WATCH FUNCTIONS continued... Go to user setting page on WellFit app. Press the Device to find your tracker. Select your watch and it will sync automatically. 4. When pairing, choose the device name WellFit and press to connect to the watch. 5. Follow the brief onscreen instructions to finish setting up. You re ready to get moving. P. 12

BATTERY LIFE AND CHARGING Your battery life may vary depends on your usage. To ensure that you are always keeping track of your data, we recommend charging your device and sync your watch to the app as regularly as possible, but at least once every 2 to 3 days under normal usage. This is because when the activity tracker is out of battery, all the data stored will be erased. Under heavy usage, e.g. long tracking periods, more frequent synchronization is recommended. To charge your WellFit, plug the charging cable into the USB port on your computer or into any standard USB wall charger. Then put the watch on the dongle to charge. Charging completely takes around 2-3 hours (this is an estimation depending on what device the dongle is plugged into). It is important to make sure both your smart phone and the watch have been charged sufficiently, as low battery for your phone, watch or both will affect the Bluetooth connectivity. P. 13

CRITICALLY LOW BATTERY You can also check your battery level from the WellFit app. In these cases, the battery level shown reflects the last time you synced your WellFit. To make sure you are seeing the current battery level, sync your WellFit. If your battery is critically low, charge your WellFit as soon as possible. Battery Icon will appear when low battery is detected. Battery Icon will flash while charging. Battery Icon will turn off when charging is complete. Battery icon P. 14

WELLFIT APP STATUS TRACKING Your WellFit starts tracking your status for the next day at midnight based on your time zone. Though your status reset to zero at midnight, the previous day s data is saved automatically; which can be viewed the next time you sync your WellFit. You can adjust your time zone through the WellFit app to detect your time zone automatically. SETTING THE TIME & DATE Time and Date will automatically update after syncing with the WellFit app. CHECKING THE INSTANT STATUS Press the A button once to check the instant status PEDOMETER MODE Press the A button, pedometer icon will light up with Bluetooth icon (if Bluetooth is activated) A Button P. 15

WELLFIT APP Continued: Note: In order to maximize the accuracy of the step counting feature of the watch, please wear the watch properly as shown in the diagram (strap of the watch must fasten tightly around the wrist and it must not be loose; the tracker must only be worn on the left wrist and not the right to maximize the accuracy of step counting) as the design and accuracy of the watch for step counting is based on the positioning of the watch. By wearing the watch correctly, the steps counted during the walk will be more accurate. x P. 16

WELLFIT APP Continued: User can also check their pedometer statistics through the WellFit app after synchronization. For more information on tracking your activity, slide the bar chart to check the details information. P. 17

SLEEPING MODE: Press & hold the B button for 2 seconds to activate the sleeping monitor the sleeping LED will light up B Button To stop using the sleeping mode after waking up, press & hold again the B button for 2 seconds to exit and go back to pedometer mode. P. 18

SLEEPING MODE Continued: To see your sleep data, sync your tracker and then view the WellFit app for your data records For more information on your sleep quality, slide the bar chart to check the details information. Your WellFit tracks the duration of your sleep and any movement throughout to help you understand your sleep quality. P. 19

SLEEPING MODE Continued: NOTE: 1. Sleeping quality is calculated based on the age, time, movement, deep sleep and light sleep. 2. When sleeping mode has been activated, Bluetooth will automatically switch off and the unit will not be able to synchronize with the smartphone. 3. Remind to switch on again the Bluetooth after exit sleeping mode and go back to pedometer mode. P. 20

ALARMS: USING THE ALARMS Your WellFit can alert you with its alarm feature. You can set up to 3 Smart Alarms and 4 Pills Alarm to recur every day or on particular days of the week. SET THE SMART & PILLS ALARMS You can add, edit, and delete the alarms from the WellFit app. When the alarm goes off, this will also be reflected by the lighting up of the LED smart alarm icon or LED pills alarm icon. Sync your WellFit to update your watch with the new alarms, and enable or disable the alarms. When the alarm goes off, this will also be reflected by the lighting up of the LED smart alarm icon or LED pills alarm icon. P. 21

ALARMS Continued: Alarm setting will automatically update after sync with mobile P. 22

YOUR GOAL SETTING: TRACKING A DAILYGOAL: Your WellFit is designed to track your progress towards a goal that you set on your WellFit app. By default, your daily goal is set to 10,000 steps per day. Setting a value for your daily goal: You can set a specific value for your daily goal on the WellFit app. Instead of the default daily goal value of 10,000 steps per day, you may want to change the target to 8,000 steps a day. To change your goal value: Press Set Goal on WellFit app to set the Target Steps. Change your Daily Goal value and click Save. Sync your WellFit to update your tracker with the new value you have chosen. P. 23

SETTING THE NOTIFICATIONS: User can set the Notifications on WellFit App Before setting, please ensure to turn on the Bluetooth for both smart phone and smart watch. Click Setting on User Setting Mode to activate your notifications P. 24

INCOMING CALL NOTIFICATIONS: Click on the Incoming call icon to activate the function on WellFit app. User can press the watch button to stop the notifications. The Incoming Call LED light will turn on to signal an incoming call Incoming Call Notice: When the features are activated, the icon(s) should be highlighted in black under settings in the Wellfit app. Any interference or inactivity of the features will cause the icons to deactivate and turn white. Please pair and synchronize your smartwatch once again to reactivate features. P. 25

PHONE FINDER: Click on the Phone Finder icon to activate the function on WellFit app. B Button A Button Press the B button once to activate the phone finder on watch, the phone finder LED will light up. Press the A button to find your phone (LED will flash 3 times). Press again the B button to exit back to pedometer mode. Phone Finder function will auto out if no action after 30 seconds. P. 26

MESSAGE NOTIFICATIONS: Click on the Message icon to activate the function on WellFit app and select which message you would like to receive. Message LED will flash and vibrate once message notifications arrive. User can press the watch button to stop the notifications. P. 27

SELFIE: Click on the Selfie icon to activate the function on WellFit app. A Button Press the A button once to take the photo or to start/stop the video. P. 28

UPDATING YOUR WellFit: 1. Free feature enhancements and product improvements are occasionally made available with firmware updates provided through the WellFit app. 2. We recommend keeping your WellFit up to date. 3. We recommend that you charge your mobile phone before updating or while the update is in progress, as updating the firmware or synchronization may take a while and therefore use up a lot of the battery. RESTARTING YOUR WellFit: If you experience one of the following problems with your Well- Fit, it may be fixed by restarting your watch: It is not syncing It is not responding to movement It does not respond even when charging The battery is charging but the watch is not flashing It is not tracking your steps It is not responding when button(s) are pressed P. 29

TO RESTART YOUR WellFit: 1. Recharge your WelllFit after the battery without electricity. 2. Your WellFIt has now restarted and should work normally. GENERAL INFO & SPECIFICATION Your WellFIt contains the following: A 3-axis accelerometer, which measures your motion patterns and determines your steps taken, distance traveled, calories burned, active minutes, and sleep quality. A Bluetooth 4.0 radio transceiver P. 30

BATTERY: WellFit contains a rechargeable lithium-polymer battery. For information about battery life, see Battery life and charging. When connecting the smart watch to the docking station, please ensure the two pins at the back of the smart watch matches the connective pins of the docking station. MEMORY: WellFIt holds detailed minute-by minute information for the most recent 14 days. Your recorded data consists of steps walked, distance traveled, calories burned, active minutes and sleep activity. Sync your WellFIt regularly to have the most detailed data available. P. 31

CARE AND WEARING TIPS: Clean and dry your WellFIt regularly, particularly in areas in contact with the skin. Use a clean, damp cloth. Do not wash the product under a faucet. Wear your WellFIt loosely enough to allow air circulation. Use skin care products sparingly on the areas of the skin covered by your WellFit product. Take the product off from time to time to clean it and allow for your skin to breathe. Do not open the enclosure or disassemble your WellFit. Do not use your WellFit if the display is cracked. Substances in this product and its battery may harm the environment or cause injury if handled and disposed of improperly. Do not place your WellFit in a dishwasher, washing machine, or dryer. Do not expose your WellFit to extremely high or low temperatures. Do not use your WellFit in a sauna or steam room. Do not leave your WellFit in direct sunlight for an extended period of time. Do not dispose of your WellFit in a fire. The battery could explode. Do not use abrasive cleaners to clean your WellFit. Do not wear your WellFit while charging it. Do not charge your WellFit while it is wet. Remove your WellFit if it feels warm or hot. P. 32

BUILT-IN BATTERY PRECAUTIONS: Attempting to open the watch enclosure will void the warranty and can result in a safety hazard. Only use the charger dongle that shipped with your product to charge the battery. Charge the battery using a computer, powered hub, or power supply that is certified by a recognized testing laboratory. Charge the battery in accordance with the instructions supplied with this guide. P. 33

CAUTIONS: Prolonged contact may contribute to skin irritation or allergies in some users. If you notice any signs of skin redness, swelling, itchiness, or other skin irritation, please discontinue use or wear the product over a piece of clothing. Continued use, even after symptoms subside, may result in renewed or increased irritation. If symptoms persist, consult your doctor. The device contains electrical components that could cause injury if not handled properly. This product is not a medical device, and is not intended to diagnose, treat, cure, or prevent any disease. Consult your doctor before beginning or modifying any exercise program. Consult your doctor before use if you have any preexisting conditions that might be affected by your use of this WellFit product. Do not check call notifications or other data on the product s display while driving or in other situations where distractions could be hazardous. This product is not a toy. Do not allow children or pets to play with your WellFit. The product contains small components that can be a choking hazard. Your WellFit is sweat-proof and weatherproof. You can wear it while working out and doing activities such as washing your hands or doing the dishes. Remove your WellFit before showering or swimming. Should you encounter any problems with the WellFit (e.g. malfunctioning of a parameter, static electricity, interferences within the product or the need to re-set the tracker), please press two buttons at the same time to reset the tracker. All data previously input into the device will be erased and you can then/will need to re-set the tracker all over again. The content of this manual is subject in order to change without further notice. Due to illustration limitations, the LCD displays shown in this manual may differ from the actual display. The manufacturer and its suppliers hold no responsibility to you or any other persons for any damage expenses, lost-profits, or any other claims arisen by using this product. The contents of this manual may not be reproduced without the permission of the manufacturer. P. 34