Compact Module Suitable for Gigabit Ethernet applications Shallow design requires minimal back-box depth Interchangeable with all other Euro modules and quarter blanks Fits all standard Euro faceplates Individually QA tested The Connectix Category 6 Compact Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal solution wherever back-box depth is a problem. The attractive high gloss finish and easy to use labelling system is identical to all other Connectix Cabling Systems Modules, making them interchangeable in most applications. Width Back-box IDC Labels IDC Blocks 25 mm 21 mm 50 mm Minimum 15 mm recommended Polycarbonate/ABS thermoplastic resin, with grade UL94 V0 at 1.5 mm flame retardancy High gloss Individual colour coded to T568B 4-way industry standard IDC blocks Category 6 Compact Modules can be fitted into single or dual gang Euro Faceplates and can be combined with quarter blanks and/or voice modules to provide the required configuration. Connectix Category 6 Modules are fully compliant with the ANSI/TIA Category 6 Standard. When used in conjunction with Connectix Category 6 Patch Panels and UTP Cable the user will get a link performance exceeding the Category 6 requirements. Cat 6 Compact UTP RJ45 Euro Module 008-000-001-20 3.1 2016 Connectix E&OE Updated 11/2016
LJ6C Module Industry standard LJ6C size Category 6 performance Compact low profile design Industry standard IDCs Top quality high performance sockets Individually QA tested Width Back-box Mounting Hole Size Panel Thickness IDC Labels Cable Guide Sockets IDC Blocks 25 mm 21 mm 38.5 mm Minimum 20 mm with panel 15 mm with faceplate 21.7 mm x 36.7 mm 2.0 mm Max Polycarbonate/ABS thermoplastic resin with grade UL94 VO at 1.5 mm flame retardancy High gloss Colour coded labels T568B Integrated cable tie position High performance unshielded RJ45 4-way industry standard IDC blocks Category 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250 MHz to be achieved. Connectix Category 6 LJ6C Modules are ideal for use in floor boxes, or any application that has an industry standard LJ6C aperture. Single and dual gang faceplates are available for up to four LJ6C modules in addition to panels suitable for Ackerman floor boxes. Their attractive high gloss finish and easy to use labelling system makes them popular with both installers and end users alike. Installation is made easy with the unique colour coded cable saddle and the use of industry standard IDCs. Connectix Category 6 Modules are fully compliant with the ANSI/TIA Category 6 Standard. When used in conjunction with Category 6 patch panels and UTP cable the user will get a link performance exceeding Category 6 requirements. Cat 6 LJ6C Compact Module 008-000-001-10 LJ6C Single One Gang Faceplate 008-009-001-00 LJ6C Dual One Gang Faceplate 008-009-002-00 LJ6C Quad Two Gang Faceplate 008-009-004-00 Quad Panel for Ackerman Floor box 008-011-001-06 LJ6C Blank 008-001-004-07 3.2 2016 Connectix E&OE Updated 11/2016
4000 Series Vertical Outlet High density, single gang unit Category 6 performance No protruding leads Designed for direct wall mounting Custom logo service available Available in a 2 or 4 port version Width IDC Blocks PCB 87 mm 27 mm 87 mm ABS thermoplastic resin, with grade UL94 VO at 1.5 mm flame retardancy High gloss Industry standard IDC blocks 1.6 mm double sided PTH boards TIA/EIA-568-C Category 6 Specification The Connectix 4000 Series offers Category 6 performance in a high-density package. The 4000 Series is extremely quick and easy to install; just attach the base plate, snap in the PCB, punch down the cables and install the cover. Gone are the problems of installing modules into a faceplate and pushing excess wires into a back box. The 4000 Series outlets have been designed for direct wall mounting with top entry mini trunking. In addition, they fit on a standard back box to provide maximum mounting flexibility. The position of the sockets on the vertical outlet allows for a compact installation without protruding leads. CCS Cat 6 4 Way Vertical Wall Outlet 008-001-011-10 CCS Cat 6 2 Way Vertical Wall Outlet 008-001-011-20 3.3 2016 Connectix E&OE Updated 11/2016
4000 Series Tamperproof Outlet Tamperproof design High density, single gang unit Category 6 performance Designed for direct wall mounting Custom logo service available Available as a 2 or 4 port version Width 87 mm 27 mm 87 mm (including tamperproof cover) 120 mm Spacer Plate 8 mm ABS thermoplastic resin, with grade UL94 VO at 1.5 mm flame retardancy High gloss IDC Blocks 4-way industry standard IDC blocks PCB 1.6 mm double sided PTH boards TIA/EIA-568-C Category 6 Specification The Connectix 4000 Series offers Category 6 performance in a high-density package. The Tamperproof outlet restricts the user s access to patch leads, eliminating unauthorised or accidental patch lead disconnection which is one of the most common causes of network problems. The 4000 Series is extremely quick and easy to install; just attach the base plate, snap in the PCB, punch down the cables and install the cover. The Tamperproof version has the added benefit that leads cannot be unplugged without first removing the cover, and the position of the sockets allow for a compact installation without protruding leads. The 4000 Series outlets have been designed for direct wall mounting with top entry mini trunking. In addition, they fit on a standard back box to provide maximum mounting flexibility. CCS 4 Way Cat 6 Tamperproof Wall Outlet 008-001-011-30 CCS 2 Way Cat 6 Tamperproof Wall Outlet 008-001-011-40 3.4 2016 Connectix E&OE Updated 11/2016
Tool-less Keystone Module Quick and easy to install Snap-fit to terminate Suitable for all standard Keystone applications Compact design Category 6 hardware performance T568A and T568B colour coded wiring terminals Width Mounting Hole Size IDC Labels IDC Blocks 16.3 mm 31.5 mm 21.0 mm 19.3 mm x 14.7 mm Polycarbonate/ABS thermoplastic resin with grade UL94 VO at 1.5 mm flame retardancy Colour coded to T568A and T568B Tool-less IDC mechanism Connectix Tool-less Keystone Modules ensure a quick and easy to terminate installation. The snap-fit to terminate design means that a punch down tool is not required. They have been designed to be installed into most UK and European Keystone applications, including standard or angled faceplate products, patch panels or surface boxes. The loading cap is colour coded to T568A and T568B standards to ensure a quick and easy installation. The module offers a high-performance transmission that meets or exceeds Category 6 standards. Cat 6 Tool-less Keystone Module 008-010-010-60 CCS Angled Shuttered Euro Fascia 008-010-010-18 3.5 2016 Connectix E&OE Updated 11/2016
Unloaded UTP Keystone Patch Panel 24 and 48-way High Density Category 6 performance Suitable for Connectix Express assemblies Suitable for tool-less Keystone Modules Integrated cable management bar Width 483 mm (19 ) 155 mm 44.45 mm Mild steel Black paint - fine textured The Connectix 24 and 48 Way Keystone Panels offer ultra-high Density and the capability for Category 6 data transmission performance levels. The panel is supplied unloaded and accepts Category 6 performance Keystone Modules which are simply clicked into position. Patch panel installation and termination time can be greatly reduced when Connectix Tool-less Keystone Modules are used in the panel, making for a snap-to-fit, quick and easy termination. To further increase on-site installation efficiency, Connectix Express Pre-Terminated and Pre-Tested Modules can be used. Unloaded 24 Way 1u Unshielded Keystone Panel 009-010-010-05 Unloaded 48 Way 1u Unshielded Keystone Panel 009-010-010-10 CCS Keystone Panel Blanks (Black) 009-010-009-10 CCS Unloaded 48 Way Unshielded Keystone Panel CCS Unloaded 24 Way Unshielded Keystone Panel 3.6 2016 Connectix E&OE Updated 11/2016
Angled Keystone Patch Panel Enhanced patch lead management For use in cabinets and open racks Patent pending design Suitable for Connectix Express assemblies Integrated cable management bar Robust all steel construction Width 483 mm (19 ) 130 mm 44.45 mm Mild steel Fine textured black paint (front) Bright zinc plate (rear) The Connectix 24 Way Unloaded Angled Panel offers enhanced patch lead management in any style of cabinet. The patent pending design naturally sweeps patch leads to the side of the racking, without the panel protruding beyond the rack or cabinet profiles. The 24-way Keystone Panel offers a high-density design and the capability for Category 6 data transmission performance levels. Supplied unloaded, the unshielded patch panel accepts Category 6 or Category 5e high performance Keystone Modules which are simply clicked into position. An integrated rear management tray supports the cabling and offers individual cable tie positions. For the optimum in on-site installation efficiency, Connectix Express Pre-Terminated and Pre-Tested assemblies can be used. CCS Unloaded 24 Way Angled UTP Panel 009-010-010-30 CCS Keystone Panel Blanks (Black) 009-010-009-10 3.7 2016 Connectix E&OE Updated 11/2016
Elite Patch Panel Category 6 performance Unique colour coded saddles allow for quick and easy termination Industry standard IDCs Top quality high performance sockets Individually QA tested Manufactured in the UK Width 483 mm (19 ) 30 mm 1u (44 mm) Fixing Centres 467 mm Mild steel sheet CR4 to BSEN10130-1999 DC01 Plastic inserts ABS thermoplastic resin with grade UL94 V0 at 1.5 mm flame retardancy Black powder coat to BS6496 Socket Labels 9 mm numbered card, with acetate cover IDC Colour Code IDC colour code to T568B Cable Guide Individual cable saddles with cable tie position for left or right cable entry Sockets High performance unshielded vertical jacks IDC Blocks 4 Way industry standard IDC blocks PCB Groups of 4 identical circuits on 1.6 mm double sided PTH board Connectix Category 6 High Density Elite Patch Panels provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The high density format is ideal where cabinet space is at a premium. Available in a 1u 24 port format and a 2u 48 port format, these Category 6 High-Density panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques. The front of the panel features easy to use slide-in labels. The rear utilises colour coded cable saddles and hook and loop retainers. All Connectix Category 6 High Density Panels are fully compliant with the ANSI/TIA Category 6 Standard. When used in conjunction with Connectix Category 6 Modules and UTP Cable, the user will get a link performance exceeding Category 6 requirements. CCS Elite Cat 6 High Density 24 Way UTP Panel 009-001-009-07 CCS Elite Cat 6 High Density 48 Way UTP Panel 009-001-009-30 CCS Elite Cable Management Tray 009-001-008-30 3.8 2016 Connectix E&OE Updated 11/2016
2020 Series High Density Patch Panel Easy to install Simple cable management Suitable for Gigabit Ethernet applications Adjustable recessed mounting version available Mix and match copper and fibre in one panel Manufactured in the UK Width 483 mm (19 ) 95 mm 1u (44 mm) Fixing Centres 467 mm Mild steel sheet CR4 to BSEN 10130-1999 DC01 Matt black polyester paint Socket Labels Write-on silk screen on panel front Cable Management Improved cabling facility with easy to use cable tie positions for left and right cable entry IDC Labelling Colour coded to T568B IDC Blocks Industry standard 4 way IDCs The Connectix 2020 Series Patch Panel is an alternative to the Category 6 High Density Elite Panel. It offers the same Category 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear, making termination and cable management easier. Category 6 High Density 24 way panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques. This panels offer extended PowerSum characteristics and exceeds the ANSI/TIA-568-C specifications. When combined with Connectix Category 6 Modules and UTP Cable the link will perform well in excess of the Category 6 specification. LC, SC, ST and FC fibre modules are also available, complete with a Starlight compatible gland hole and integrated management tray. Blank modules can be included for future expansion. Cat 6 24 Way High Density 2020 Panel 009-001-001-40 4 Port ST Fibre Module 009-001-040-65 2 Port SC Fibre Module 009-001-040-70 2 Port LC Fibre Module 009-001-040-80 2 Port FC Fibre Module 009-001-040-85 3.9 2016 Connectix E&OE Updated 11/2016
Through Coupler Panel High density, 24 ports in 1u Simple cable management Category 6 system performance Custom logo service available RJ45 to RJ45 connection Width 483 mm (19 ) 35 mm 24 way 1u (44 mm) Fixing Centres 467 mm Panel Mild steel sheet CR4 Panel Black powder coat BS6496 RJ45 Socket 24x Category 6 RJ45 Keystone couplers Connectix Through Coupler Panels offer Category 6 system performance, and feature 24 ports in 1u. They offer the perfect solution when a panel mounted high performance, high density plug-to-plug connection is required. Designed to match the other panels in the Connectix range the Coupler Panels have RJ45 sockets front and rear to facilitate through coupling. The Cat 6 RJ45 Couplers are suitable for linking two Cat 6 RJ45 patch leads together, fitted with RJ45 female sockets at either end. Cat 6 24 Way Through Coupler Panel 009-001-019-40 Individual Cat 6 UTP Keystone Through Coupler 008-010-010-67 3.10 2016 Connectix E&OE Updated 11/2016
Solid Cable Category 6 performance External grade cable available UL tested Every box individually tested in the UK Supplied metre marked for easy installation Performance exceeding Category 6 specifications Category 6 Unshielded Twisted Pair Cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Category 6 UTP Solid Cable offers the performance characteristics required by the ever-present Category 6 Standard. When used in conjunction with Connectix Category 6 Modules and Patch Panels the user will get a link performance exceeding Category 6 requirements. Inner Conductor 23 AWG plain copper Insulation High density polyethylene Construction 4 twisted pairs cabled together with spline Colour Code Pair 1: White/Blue-Blue/White Pair 2: White/Orange-Orange/White Pair 3: White/Green-Green/White Pair 4: White/Brown-Brown/White Jacket PVC, PE (external) or Low Smoke Zero Halogen Overall Diameter 5.5 mm +/- 0.2 mm Weight (Kg/Km) 39.1 (PVC/PE)/41.2 (LSZH) Min Bending Radius Installation 50 mm Min Bending Radius Installed 25 mm Impedance 100 Ohm +/- 15 Ohm Capacitance < 5.6nF/100 m DC Resistance < 9 Ω/100 m Velocity Ratio 69% Operating Temperature Range -20 C to +60 C Installation Temperature Range 0 C to +50 C LSZH Jacket IEC 60332-1, IEC 61034 and IEC 60754 Cat 6 UTP PVC Solid Cable (Grey) Cat 6 UTP External Solid Cable (Black) Cat 6 UTP LSZH Solid Cable (Violet) 001-003-005-00X 001-003-005-10X 001-003-005-60X 3.11 2016 Connectix E&OE Updated 11/2016
Solid SWA Cable Suitable for outdoor usage Rodent proof and waterproof Suitable for Gigabit Ethernet Performance exceeding Category 6 specifications AWG 23 Conductor Diameter 0.57+/- 0.01 Insulation (PE) Thickness 0.215 Insulation Diameter (mm) 1.00(+/-0.05) x 2C twist PVC Jacket Diameter (mm) 6.5+/-0.15 PVC Jacket Colour Grey (RAL-7044) PE Jacket Diameter (mm) 8.5+/-0.2 PE Jacket Colour Black SWA Construction 0.9 mm x 30+/-3 PE Outer Jacket Thickness (mm) 1.2 PE Outer Jacket Diameter (mm) 12.80 PE Outer Jacket Colour Black Max Conductor DC Resistance at 20ºC <81.6 Rated Temperature 60ºC Velocity Ratio 65% Category 6 unshielded twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Category 6 UTP Solid Cable offers the performance characteristics required by the ever-present Category 6 Standard. When used in conjunction with Connectix Category 6 Modules and Patch Panels the user will get a link performance exceeding Category 6 requirements. Cat 6 UTP PE Solid SWA Cable (Black) 001-003-005-70 Performance Frequency (MHz) RL min. (db) Att max. (db/100m) NEXT (db) ACR (db) ELFEXT (db) PSELFEXT (db) Impedance (Ohm) 1.000 22.60 1.82 67.00 65.00 66.00 63.00 4.000 23.10 2.10 65.00 63.00 63.80 60.8 8.000 23.00 4.30 56.00 51.00 51.70 48.70 16.000 24.50 5.80 51.80 45.00 45.70 42.70 25.000 25.00 6.60 50.00 43.00 43.80 40.80 31.250 25.00 8.20 47.00 37.00 39.70 36.70 100+/-15 62.500 25.00 9.20 45.00 35.00 37.70 34.70 100.000 24.20 10.23 44.30 32.00 35.80 32.80 150.000 23.30 11.80 43.00 29.00 33.90 30.90 200.000 20.70 17.10 38.00 19.00 27.80 24.80 250.000 19.24 22.00 35.00 9.00 23.80 20.80 3.12 2016 Connectix E&OE Updated 11/2016
Patch Cable Category 6 performance UL tested Performance exceeding Category 6 specifications Inner Conductor 26 AWG plain copper Insulation High density polyethylene Construction 4 twisted pairs cabled together with spline Colour Code Pair 1: White/Blue - Blue/White Pair 2: White/Orange - Orange/White Pair 3: White/Green - Green/White Pair 4: White/Brown - Brown/White Jacket LSZH Overall Diameter 6.4 mm Min Bending Radius Installation 50 mm Min Bending Radius Installed 25 mm Impedance 100 Ohm +/- 15% Capacitance < 5.6nF/100 m DC Resistance < 9 Ω/100 m Velocity Ratio 69% ISO/IEC 2nd Edition 11801 Class E / CENELEC EN 50173-1 CENELEC EN 50288-6-2 / IEC 61156-6 (for patch) RoHS compliant with European Union issued Directive 2002/95/EC Category 6 Unshielded Twisted Pair Cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Category 6 UTP Patch Cable offers the performance characteristics required by the ever-present Category 6 Standard. When used in conjunction with Connectix Category 6 RJ45 Jacks and a Category 6 network the user will get a link performance exceeding Category 6 requirements. Cat 6 UTP Patch 305 m (Purple) 001-003-002-30 Cat 6 UTP Patch 305 m (Grey) 001-003-002-31 Cat 6 UTP Patch 305 m (White) 001-003-002-32 Cat 6 UTP Patch 305 m (Blue) 001-003-002-33 Cat 6 UTP Patch 305 m (Green) 001-003-002-34 Cat 6 UTP Patch 305 m (Red) 001-003-002-35 Cat 6 UTP Patch 305 m (Yellow) 001-003-002-36 Cat 6 UTP Patch 305 m (Orange) 001-003-002-37 Cat 6 UTP Patch 305 m (Black) 001-003-002-39 3.13 2016 Connectix E&OE Updated 11/2016
Patch Leads TIA/EIA-568-C Category 6 Specification IEC 60332-1, IEC 61034 and IEC 60754 Available from stock in lengths from 0.5 to 5 metres Available in nine different colours Each lead is individually tested Plugs conform to ISO8877 Connectix Magic Patch Brand Cat 6 UTP Patch Leads are designed to exceed the performance requirements of the Category 6 Specification. Magic Patch Leads are made from Category 6 stranded cable and are terminated using high performance modular plugs. There are a variety of leads in lengths from 0.5 to 5 metres in stock as well as several different colours. Plug Cable Cable Diameter High performance modular plug 26 AWG PVC Category 6 stranded cable Approx. 4.8 mm TIA/EIA-568-C Category 6 Specification Colour Length Product Number Length Product Number Grey 0.5 m 003-3B5-005-01C 1 m 003-3B5-010-01C White 0.5 m 003-3B5-005-02C 1 m 003-3B5-010-02C Blue 0.5 m 003-3B5-005-03C 1 m 003-3B5-010-03C Green 0.5 m 003-3B5-005-04C 1 m 003-3B5-010-04C Red 0.5 m 003-3B5-005-05C 1 m 003-3B5-010-05C Yellow 0.5 m 003-3B5-005-06C 1 m 003-3B5-010-06C Orange 0.5 m 003-3B5-005-07C 1 m 003-3B5-010-07C Purple 0.5 m 003-3B5-005-08C 1 m 003-3B5-010-08C Black 0.5 m 003-3B5-005-09C 1 m 003-3B5-010-09C Grey 2 m 003-3B5-020-01C 3 m 003-3B5-030-01C White 2 m 003-3B5-020-02C 3 m 003-3B5-030-02C Blue 2 m 003-3B5-020-03C 3 m 003-3B5-030-03C Green 2 m 003-3B5-020-04C 3 m 003-3B5-030-04C Red 2 m 003-3B5-020-05C 3 m 003-3B5-030-05C Yellow 2 m 003-3B5-020-06C 3 m 003-3B5-030-06C Orange 2 m 003-3B5-020-07C 3 m 003-3B5-030-07C Purple 2 m 003-3B5-020-08C 3 m 003-3B5-030-08C Black 2 m 003-3B5-020-09C 3 m 003-3B5-030-09C Grey 4 m 003-3B5-040-01C 5 m 003-3B5-050-01C White 4 m 003-3B5-040-02C 5 m 003-3B5-050-02C Blue 4 m 003-3B5-040-03C 5 m 003-3B5-050-03C Green 4 m 003-3B5-040-04C 5 m 003-3B5-050-04C Red 4 m 003-3B5-040-05C 5 m 003-3B5-050-05C Yellow 4 m 003-3B5-040-06C 5 m 003-3B5-050-06C Orange 4 m 003-3B5-040-07C 5 m 003-3B5-050-07C Purple 4 m 003-3B5-040-08C 5 m 003-3B5-050-08C Black 4 m 003-3B5-040-09C 5 m 003-3B5-050-09C 3.14 2016 Connectix E&OE Updated 11/2016
Patchlock Leads Individually tested up to 250 MHz Fully conforms to ANSI/TIA-568-C Uses fully shielded cable Available from stock in lengths from 0.5 to 5 metres Available with blue, red, yellow or green latches Offers enhanced security Plug Cable Boot & Secure Lock Key High performance 50 um gold plated Category 6 shielded cable ANSI/TIA-568-C Polycarbonate Polycarbonate Colour Length Product Number Colour Length Product Number Red 0.5 m 003-401-005-05 Blue 0.5 m 003-401-005-03 Red 1 m 003-401-010-05 Blue 1 m 003-401-010-03 Red 2 m 003-401-020-05 Blue 2 m 003-401-020-03 Red 3 m 003-401-030-05 Blue 3 m 003-401-030-03 Red 5 m 005-401-050-05 Blue 5 m 003-401-050-03 Yellow 0.5 m 003-401-005-06 Green 0.5 m 003-401-005-04 Yellow 1 m 003-401-010-06 Green 1 m 003-401-010-04 Yellow 2 m 003-401-020-06 Green 2 m 003-401-020-04 Yellow 3 m 003-401-030-06 Green 3 m 003-401-030-04 Yellow 5 m 003-401-050-06 Green 5 m 003-401-050-04 The Patchlock leads from Connectix provide extra security when installed in public areas as they prevent the risk of unauthorised disconnection of critical network connections. A Removal Key must be used to release the secure lock thus allowing the patch lead to be removed. The Connectix Category 6 Patch Leads are made from Category 6 stranded cable and are terminated using high performance modular plugs. The fully shielded patch leads increase signal isolation and prevent contaminant noise from entering a cabling system. Each lead is individually factory tested to the standard to ensure true Category 6 compatibility. We stock a variety of lead lengths, each available in several different colours. Connectix Category 6 FTP Patch Leads are designed to exceed the performance requirements of the Category 6 Specification. Boot Removal Key Boot Removal Key 006-003-007-90 3.15 2016 Connectix E&OE Updated 11/2016