Energetic diffuse reflection light scanner Dimensioned drawing We reserve the right to make changes 93_c3gb.fm Part No. 51 1168 1-3 V DC 5 17mm 1mm Infrared light Background suppression through appropriate optical geometry Mounting holes for fast installation Connection via M1 connector, standard plug or cable (m) IP 65 Accessories: (available separately) U L US C LISTED M1 connectors (KD ) Ready-made cables (KB ) Standard plug A Indicator diode B Receiver C Transmitter Electrical connection Phone: 8.894.41 - Fa: 888.73.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Specifications Optical data RK 93/4-15 RK 93/4 Typ. scanning range limit (white 9%) 1) 5 17mm 1mm Scanning range ) Light source LED (modulated light) Wavelength 88nm (infrared) Timing Switching frequency 5Hz Response time ms Electrical data 3) 4) Operating voltage U B 1 3VDC (incl. residual ripple) Residual ripple 15% of U B Power consumption ma..6w Switching output PNP or NPN transistor output Function characteristics light switching Signal voltage high/low (U B -3V)/ V Output current ma. 1mA Indicators LED yellow on reflection reflection, output transistor activated LED yellow flashing reflection, no performance reserve Mechanical data Housing metal Optics cover glass Weight 17g Connection type 5) M1 connector 4-pin, standard plug 4-pin or cable mm Environmental data Ambient temp. (operation/storage) C +6 C/-3 C +7 C Safety class III (acc. to EN 6114) Protective circuit 6), 3 Protection class IP 65 (acc. to EN 659) LED class 1 (acc. to EN 685-1) Applied standards EN 6947-5, UL 58 1) Typ. scanning range limit: ma. attainable range without performance reserve ) Scanning range: recommended range with performance reserve 3) Functional etra-low voltage with reliable disconnection or protective etra-low voltage (VDE 1/T 41) 4) Observe the safety regulations and installation instructions regarding power supply and wiring; for UL applications: only for use in "Class " circuits acc. to NEC 5) Cable cross-section 4.5mm² 6) =polarity reversal protection, 3=short-circuit protection for all outputs Tables RK 93/4-15 1 5 15 17 1 11 3 5 7 8 RK 93/4 1 1 7 135 14 3 15 15 11 1 white 9% grey 18% 3 black 6% Scanning range [mm] Typ. scanning range limit [mm] Diagrams RK 93/4-15 Typ. response behaviour (white 9%) 8 6 4-4 -6-8 4 6 8 1 1 14 RK 93/4 Typ. response behaviour (white 9%) 15 1 5-5 -1-15 4 6 8 1 1 14 16 18 Order guide Designation Part No. With M1 connector PNP transistor output RK 93/4-15 L 5 5513 PNP transistor output RK 93/4 L 5 4851 With standard plug NPN transistor output RK 93/-15 S 5 549 PNP transistor output RK 93/4-15 S 5 555 Remarks Approved purpose: The diffuse reflection light scanners are optical electronic sensors for optical, contactless detection of objects. With cable connection m PNP transistor output RK 93/4-15 5 554 Phone: 8.894.41 - Fa: 888.73.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Energetic diffuse reflection light scanner Dimensioned drawing We reserve the right to make changes 93_cgb.fm Part No. 51 1166 1-3 V DC 65mm Background suppression through V-shaped optical system Infrared light Small light profile for slot scanning (RK 93/4-6.1) Mounting holes for fast installation Connection via M1 connector, standard plug or cable (m) IP 65 Accessories: (available separately) U L US C LISTED M1 connectors (KD ) Ready-made cables (KB ) Standard plug A Indicator diode B Receiver C Transmitter Electrical connection Phone: 8.894.41 - Fa: 888.73.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Specifications Optical data Typ. scanning range limit (white 9%) 1) 65mm Scanning range ) Light source LED (modulated light) Wavelength 88nm (infrared) Timing Switching frequency 5Hz Response time ms Electrical data Operating voltage U 3) 4) B 1 3VDC (incl. residual ripple) Residual ripple 15% of U B Power consumption ma..6w Switching output PNP or NPN transistor output Function characteristics light switching Signal voltage high/low (U B -3V)/ V Output current ma. 1mA Indicators LED yellow on reflection LED yellow flashing reflection, no performance reserve Mechanical data Housing metal Optics cover glass Weight 17g Connection type 5) M1 connector 4-pin, standard plug 4-pin or cable mm Environmental data Ambient temp. (operation/storage) C +6 C/-3 C +7 C Safety class III (acc. to EN 6114) Protective circuit 6), 3 Protection class IP 65 (acc. to EN 659) LED class 1 (acc. to EN 685-1) Applied standards EN 6947-5, UL 58 1) Typ. scanning range limit: ma. attainable range without performance reserve ) Scanning range: recommended range with performance reserve 3) Functional etra-low voltage with reliable disconnection or protective etra-low voltage (VDE 1/T 41) 4) Observe the safety regulations and installation instructions regarding power supply and wiring; for UL applications: only for use in "Class " circuits acc. to NEC 5) Cable cross-section 4.5mm² 6) =polarity reversal protection, 3=short-circuit protection for all outputs Tables RK 93 6[L][S] 1 6 65 5 4 45 3 8 37 4 RK 93/4-6.1 1 6 65 15 5 55 3 45 5 1 white 9% grey 18% 3 black 6% Scanning range [mm] Typ. scanning range limit [mm] Diagrams RK 93 6[L][S] Typ. response behaviour (white 9%) 5 4 3 1-1 -3-4 -5 1 3 4 5 6 RK 93/4-6.1 Typ. response behaviour (white 9%) 8 6 4-4 -6-8 1 3 4 5 6 Order guide Designation Part No. With M1 connector PNP transistor output RK 93/4-6 L 5 19 With standard plug NPN transistor output RK 93/-6 S 5 546 PNP transistor output RK 93/4-6 S 5 553 With cable connection m NPN transistor output RK 93/-6 5 545 PNP transistor output RK 93/4-6 5 55 PNP transistor output RK 93/4-6.1 5 814 Remarks Approved purpose: The diffuse reflection light scanners are optical electronic sensors for optical, contactless detection of objects. Small light spot for slot scanning (RK 93/4-6.1) Phone: 8.894.41 - Fa: 888.73.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Specifications and description RK 93 Energetic diffuse reflection light scanner Dimensioned drawing We reserve the right to make changes 93_c1gb.fm Part No. 51 1165 1-3 V DC 3mm Background suppression through V-shaped optical system Infrared light Mounting holes for fast installation Connection via M1 connector, standard plug or cable (m) IP 65 Accessories: (available separately) U L US C LISTED M1 connectors (KD ) Ready-made cables (KB ) Standard plug A Indicator diode B Receiver C Transmitter Electrical connection Phone: 8.894.41 - Fa: 888.73.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Specifications Optical data Typ. scanning range limit (white 9%) 1) 3mm Scanning range ) Light source LED (modulated light) Wavelength 88nm (infrared) Timing Switching frequency 5Hz Response time ms Electrical data Operating voltage U 3) B 1 3VDC (incl. residual ripple) Residual ripple 15% of U B Power consumption ma..6w Switching output PNP or NPN transistor output Function characteristics light switching Signal voltage high/low (U B -3V)/ V Output current ma. 1mA Indicators LED yellow on reflection LED yellow flashing reflection, no performance reserve Mechanical data Housing metal Optics cover glass Weight 17g Connection type 4) M1 connector 4-pin, standard plug 4-pin, or cable mm Environmental data Ambient temp. (operation/storage) C +6 C/-3 C + 7 C Safety class III (acc. to EN 6114) Protective circuit 5), 3 Protection class IP 65 (acc. to EN 659) LED class 1 (acc. to EN 685-1) Applied standards EN 6947-5, UL 58 1) Typ. scanning range limit: ma. attainable range without performance reserve ) Scanning range: recommended range with performance reserve 3) Observe the safety regulations and installation instructions regarding power supply and wiring; for UL applications: only for use in "Class " circuits acc. to NEC 4) Cable cross-section 4.5mm² 5) =polarity reversal protection, 3=short-circuit protection for all outputs Tables 1 3 18 3 4 15 17 1 white 9% grey 18% 3 black 6% Scanning range [mm] Typ. scanning range limit [mm] Diagrams 3 1-1 Typ. response behaviour (white 9%) -3 4 6 8 1 1 14 16 18 Order guide Designation Part No. With M1 connector PNP transistor output RK 93/4 L 5 393 With standard plug NPN transistor output RK 93/ S 5 544 PNP transistor output RK 93/4 S 5 551 Remarks Approved purpose: The diffuse reflection light scanners are optical electronic sensors for optical, contactless detection of objects. With cable connection m PNP transistor output RK 93/4 5 55 Phone: 8.894.41 - Fa: 888.73.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com