A Coupling Method for Hybrid CFD-CAA Simulations using a Dual Mesh Approach. Matthias Tautz

Similar documents
On the flow and noise of a two-dimensional step element in a turbulent boundary layer

Development of an Integrated Computational Simulation Method for Fluid Driven Structure Movement and Acoustics

Transition Flow and Aeroacoustic Analysis of NACA0018 Satish Kumar B, Fred Mendonç a, Ghuiyeon Kim, Hogeon Kim

Coupling of STAR-CCM+ to Other Theoretical or Numerical Solutions. Milovan Perić

Near Field and Far Field Prediction of Noise in and around a Loudspeaker: A Numerical and Experimental Investigation

Modeling Supersonic Jet Screech Noise Using Direct Computational Aeroacoustics (CAA) 14.5 Release

Vehicle Cabin Noise from Turbulence Induced by Side-View Mirrors. Hua-Dong Yao, 2018/8/29 Chalmers University of Technology, Sweden

Experimental and Numerical Analysis of Near Wall Flow at the Intake Valve and its Influence on Large-Scale Fluctuations

THE APPLICATION OF AN ATMOSPHERIC BOUNDARY LAYER TO EVALUATE TRUCK AERODYNAMICS IN CFD

Introduction to Computational Fluid Dynamics Mech 122 D. Fabris, K. Lynch, D. Rich

Direct Numerical Simulation of a Low Pressure Turbine Cascade. Christoph Müller

Dynamic Mode Decomposition analysis of flow fields from CFD Simulations

Slat noise prediction with Fast Multipole BEM based on anisotropic synthetic turbulence sources

Aero-Vibro Acoustics For Wind Noise Application. David Roche and Ashok Khondge ANSYS, Inc.

4D-PIV advances to visualize sound generation by air flows

Aerodynamic optimization of low pressure axial fans with OpenFOAM

SIMULATION AND OPTIMIZATION

Advanced ANSYS FLUENT Acoustics

Design Optimization of a Weather Radar Antenna using Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD)

CFD Analysis of 2-D Unsteady Flow Past a Square Cylinder at an Angle of Incidence

Application of Wray-Agarwal Turbulence Model for Accurate Numerical Simulation of Flow Past a Three-Dimensional Wing-body

Mesh optimization for ground vehicle Aerodynamics

NUMERICAL MODELING AND EXPERIMENTAL EVALUATION OF AN HIGH-SPEED TRAIN PANTOGRAPH AERODYNAMIC NOISE

NUMERICAL MODELING STUDY FOR FLOW PATTERN CHANGES INDUCED BY SINGLE GROYNE

Similarity and Model Testing

Recent applications of overset mesh technology in SC/Tetra

High-Lift Aerodynamics: STAR-CCM+ Applied to AIAA HiLiftWS1 D. Snyder

Rotorcraft Noise Prediction with Multi-disciplinary Coupling Methods. Yi Liu NIA CFD Seminar, April 10, 2012

Computational Fluid Dynamics (CFD) Simulation in Air Duct Channels Using STAR CCM+

Verification and Validation in CFD and Heat Transfer: ANSYS Practice and the New ASME Standard

Duct Pulsation Problem Captured and Solved Using STAR-CCM+

Introduction to C omputational F luid Dynamics. D. Murrin

Validation of a Multi-physics Simulation Approach for Insertion Electromagnetic Flowmeter Design Application

Fluid-Structure Interaction Modeling of High-Aspect Ratio Nuclear Fuel Plates using COMSOL

CDA Workshop Physical & Numerical Hydraulic Modelling. STAR-CCM+ Presentation

Numerical Modeling of Ship-Propeller Interaction under Self-Propulsion Condition

Coupled Analysis of FSI

A new methodology for fuel mass computation of an operating aircraft

NUMERICAL STUDY OF CAVITATING FLOW INSIDE A FLUSH VALVE

Offshore Platform Fluid Structure Interaction (FSI) Simulation

High-Fidelity Simulation of Unsteady Flow Problems using a 3rd Order Hybrid MUSCL/CD scheme. A. West & D. Caraeni

Summary of the main PROBAND project results

Preliminary investigation into two-way fluid structure interaction of heliostat wind loads Josh Wolmarans

2-D Tank Sloshing Using the Coupled Eulerian- LaGrangian (CEL) Capability of Abaqus/Explicit

EVALUATION OF A GENERAL CFD-SOLVER FOR A MICRO-SCALE URBAN FLOW

FFOWCS WILLIAMS-HAWKINGS ACOUSTIC ANALOGY FOR SIMULATION OF NACA 4-(3)(08)-03 PROPELLER NOISE IN TAKE-OFF CONDITION

Numerical Analysis of a Blast Wave Using CFD-CAA Hybrid Method

Estimating Vertical Drag on Helicopter Fuselage during Hovering

COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF ORIFICE PLATE METERING SITUATIONS UNDER ABNORMAL CONFIGURATIONS

Numerical and theoretical analysis of shock waves interaction and reflection

McNair Scholars Research Journal

Aerodynamic Study of a Realistic Car W. TOUGERON

CFD VALIDATION FOR SURFACE COMBATANT 5415 STRAIGHT AHEAD AND STATIC DRIFT 20 DEGREE CONDITIONS USING STAR CCM+

G3 - Sessione Speciale sullo sfruttamento dell'energie Rinnovabili Marine Quartiere Fieristico di Ferrara, 23 Settembre 2016

S-ducts and Nozzles: STAR-CCM+ at the Propulsion Aerodynamics Workshop. Peter Burns, CD-adapco

Journal of Fluid Science and Technology

Estimation of Flow Field & Drag for Aerofoil Wing

Streamlining Aircraft Icing Simulations. D. Snyder, M. Elmore

Influence of mesh quality and density on numerical calculation of heat exchanger with undulation in herringbone pattern

STAR-CCM+: Wind loading on buildings SPRING 2018

Use of STAR-CCM+ in Marine and Off-Shore Engineering - Key Features and Future Developments - M. Perić, F. Schäfer, E. Schreck & J.

Modeling and Simulation of Single Phase Fluid Flow and Heat Transfer in Packed Beds

Co-Simulation von Flownex und ANSYS CFX am Beispiel einer Verdrängermaschine

Modelling atomization with phase change

Available online at ScienceDirect. The 2014 conference of the International Sports Engineering Association.

CFD Modelling in the Cement Industry

Recent developments for the multigrid scheme of the DLR TAU-Code

Backward facing step Homework. Department of Fluid Mechanics. For Personal Use. Budapest University of Technology and Economics. Budapest, 2010 autumn

CFD MODELING FOR PNEUMATIC CONVEYING

Accurate and Efficient Turbomachinery Simulation. Chad Custer, PhD Turbomachinery Technical Specialist

A Comparative CFD Analysis of a Journal Bearing with a Microgroove on the Shaft & Journal

Computational Domain Selection for. CFD Simulation

Advances in Cyclonic Flow Regimes. Dr. Dimitrios Papoulias, Thomas Eppinger

Numerical comparison of different solution methods for optimal boundary control problems in thermal fluid dynamics

SHOCK WAVES IN A CHANNEL WITH A CENTRAL BODY

Calculate a solution using the pressure-based coupled solver.

Simulations of the vortex in the Dellenback abrupt expansion, resembling a hydro turbine draft tube operating at part-load

Computational Fluid Dynamics, Simulation, and Computational tools in Wind Engineering

Turbulence Modeling. Gilles Eggenspieler, Ph.D. Senior Product Manager

ANSYS Fluid Structure Interaction for Thermal Management and Aeroelasticity

Investigation of the critical submergence at pump intakes based on multiphase CFD calculations

Problem description. The FCBI-C element is used in the fluid part of the model.

CFD Application in Offshore Structures Design at PETROBRAS

Wind Tunnel Validation of Computational Fluid Dynamics-Based Aero-Optics Model

CFD design tool for industrial applications

Large Eddy Simulation of Flow over a Backward Facing Step using Fire Dynamics Simulator (FDS)

A Framework for Coupling Reynolds-Averaged With Large-Eddy Simulations for Gas Turbine Applications

LARGE EDDY SIMULATION OF VORTEX SHEDDING WITH TRIANGULAR CYLINDER AHEAD OF A SQUARE CYLINDER

Virtual methodology for predicting whistling noise over the front grill of a vehicle

Challenges in Boundary- Layer Stability Analysis Based On Unstructured Grid Solutions

Hydro-elastic analysis of a propeller using CFD and FEM co-simulation

Wind Tunnel Validation of Computational Fluid Dynamics-Based Aero-Optics Model

The second part of the tutorial continues with the subsequent ANSYS Mechanical simulation steps:

Optimizing Bio-Inspired Flow Channel Design on Bipolar Plates of PEM Fuel Cells

Scuola Politecnica DIME

CFD Topological Optimization of a Car Water-Pump Inlet using TOSCA Fluid and STAR- CCM+

Numerical Modeling Study for Fish Screen at River Intake Channel ; PH (505) ; FAX (505) ;

02_CRADLE 03_CSSRC 04_HSVA

Reproducibility of Complex Turbulent Flow Using Commercially-Available CFD Software

Click to edit Master title style

Transcription:

A Coupling Method for Hybrid CFD-CAA Simulations using a Dual Mesh Approach Matthias Tautz München, 21. November 2013

Content 1. Motivation Problem Description 2. Analytical Approach 3. Experiments 4. Aeroacoustic Simulation Hybrid Method CFD-Simulation Acoustic Source Distribution Results 5. Conclusion 2

Simplified VHAC Outlet Goemetry Real Outlet Geometry Simplified Model Plate in Channel * Broadband Noise Tonal Frequencies UU Plate Length ll 00 [mmmm] Tonal Frequency ff [HHHH] 20,8 3268 24,4 3084 Analytical Experimental Numerical 28,4 2997 32,2 2828 36,3 2670 40,4 2520 *S. Guerina, E. Thomy, M.C.M. Wright: Aeroacoustics of automotive vents, Journal of Sound and Vibration, 285, 2005, S. 859 875 3

Parker-Mode Theory Kochs Analytical Approach dd 0 /2 Assumptions 2-Dimensial Case Potential Flow Plate Thickness Neglectable UU dd 0 /2 ll 0 Plate σσ 0 Quantitites Plate Length ll 0 Channel Diameter dd 0 Phase Change σσ 0 Inlet Velocity UU W. Koch: Resonant Acoustic Frequencies Of Flat Plate Cascades, Journal of Sound and Vibration 88(2), 1983, S.233-242 4

Parker-Mode Diagram αα-mode ββ-mode γγ-mode δδ-mode UU = 0 Influence of UU neglectable for small Mach-Numbers 5

Parker-Mode Diagram αα-mode ββ-mode γγ-mode δδ-mode UU = 0 Influence of UU neglectable for small Mach-Numbers ββ-mode at plate in channel configuration 6

Experiments - Microphones 5 1 4 0 6 2 7 3 10 D 5 D 2 D 7

Experiments - Wall Pressure Sensors 4 0 1 3 5 2 8

Hybrid CFD-CAA Approach Fluid Dynamic Simulation Star-CCM+ Navier Stokes Equations Finite Volume Approach Coupling Coupled Reader Source Term Calculation Finite Element Approach Acoustic Simulation CFS++ (TU Wien) Lighthill-Analogy Finite Element Approach 2 cc ρρ 0 vv ii vv jj 0 dd xx ii xx jj ωω 2 ρρ tt 2 2 + cc ρρ 0 dd xx ii xx ii 2 = cc ρρ 0 vv ii vv jj 0 dd xx ii xx jj Dual Mesh Creation Energy Conserving Interpolation 9

Fluid Dynamics Simulation - Setup Property Turbulence Model Value LES-Wale Number of timesteps 10000 Inlet Profile from RANS Time step Simulation Time 1e-5 s 0.1 s y-plus (plate) 0.6 Courant Number 0.5 Channel Re-Number 42756 Hexahedra Cells 4250648 10

Time Resolution and Y+ Property Turbulence Model Value LES-Wale Number of timesteps 10000 Time step Simulation Time 1e-5 s 0.1 s y-plus (plate) 0.6 Courant Number 0.5 Channel Re-Number 42756 Hexahedra Cells 4250648 11

Karman Vortex Street Development of Karman-Vortex Karman Vortex street is known to main acoustic source region, for example B.T. Tan, M.C. Thompson, K. Hourigan: Sources of acoustic resonance generated by flowaround a long rectangular plate in a duct, Journal of Fluids and Structures, 18, 2003, S.729 740 12

Velocity Profiles Hot-wire Anemometer Velocity Profile Measurements 2 D 3 cm downstream plate 0.5 D Outlet Profile 0.5 D Profile 2 D Profile 13

Dual Mesh Creation CFD Mesh Hexahedrons 4369324 Dual Mesh Tetrahedrons 4 Wedges 4320 Hexahedrons 4304429 Prisms 1778 Polyhedrons 79400 Sum 4310535 Dual FE-Mesh Tetrahedrons 28 Wedges 10104 Hexahedrons 4304381 Sum 4314513 Cell center based dual mesh creation Splitting cells into valid FE-Cells 14

First Results Far Field Resolving Wave Length of 3000 Hz at least 20 times (5.7 mm) Created in ICEM-CFD around 1 mio cells Perfectly Matched Layer (PML) avoids Reflection upstream and downstream Ideas for changing Simulation.. 15

Possible Solutions CFD Inlet Profile from RANS Transient artificial turbulence Inlet Profile Changing Fluid Simulation Domain longer inlet channel finer mesh more realistic downstream region Or changes to CAA 16

Acoustic Sources Lighthill based Computation by Coupled Reader on dual FE-Mesh ωω 2 ρρ tt 2 2 + cc ρρ 0 dd = xx ii xx ii Computation by Star-CCM+ FV-Mesh 2 cc ρρ 0 vv ii vv jj 0 dd xx ii xx jj 2 cc ρρ 00 vv ii vv jj 0 dd xx ii xx jj cc 2 0 ωω 22 ρρ 00 vv ii vv jj dd xx ii xx jj 17

Acoustic Sources Pressure Based (incompressible) ωω 2 ρρ tt 2 2 + cc ρρ 0 dd = xx ii xx ii cc 0 2 xx ii pp ff xx ii dd cc 0 2 xx ii pp ff xx ii dd cc 0 2 ωω 22 pp ff xx ii 22 dd ωω 2 pp ff tt 2 dd 18

Acoustic Sources Splitting Sources cc 0 2 ωω 22 pp ff xx ii 22 dd = Stationary Sources obtained by temporal average Fluctuations cc 0 2 ωω 22 pp ff xx ii 22 dd cc 0 2 ωω 22 pp ff xx ii 22 dd - cc 2 0 ωω 22 pp ff xx22 dd ii + Used for CAA-Simulation 19

Acoustic Mesh Creation Source Region Resolving Flow Features Far Field Resolving Wave Length of 3000 Hz at least 20 times Far field capturing all microphones Perfectly Matched Layer (PML) avoids Reflections Mortar Interface between regions Acoustic Mesh Nodes Source Region 358980 Upstream PML 47420 Farfield 519792 Farfield PML 279079 Sum 1205271 20

Thank You For Attantion! and now Ideas, Comments, Questions? 21