RACKMOUNT CONSOLE KVM SWITCH QUICK INSTALLATION GUIDE MODELS 521796, 521871, 523561 & 523578 INT-521796/521871/523561/523578-QIG-0307-01
INTRODUCTION Thank you for purchasing the INTELLINET NETWORK SOLUTIONS Rackmount Console KVM Switch, Model 521796 (15 LCD, 8-port); Model 521871 (15 LCD, 16-port); Model 523561 (17 LCD, 8-port); or Model 523578 (19 LCD, 8-port). With a keyboard mouse, LCD panel and KVM switch module housed in an industrystandard 19 1U- or 2U-height rack drawer, the console saves you up to a third of the space needed for a rack cabinet. Plus, when the console is cascaded with other KVM switch modules to increase server management capacity, you save even more space. All KVM switch modules come with a universal CEN36 connector for connection between the console drawer and a KVM switch module. This modularized design offers maximum flexibility, as you can choose and swap the modules to fit your needs. A KVM switch module can also be used as an independent KVM switch. This quick installation guide shows you how to assemble and position the rackmount console. (For instructions, features and specifications for the switch itself, refer to the separate Rackmount Console KVM Switch user manual.) Follow the steps for quick and easy installation and you ll soon be enjoying these additional popular features: Flip-open 15 /17 /19 LCD panels support resolutions of 1024 x 768 or 1280 x 1024. Compatible with rack cabinets with depths of 20 (50cm) and up (with appropriate rear bracket & extension kit). Standard 19 1U rack drawer. Ergonomic handrest design. Locking mechanism locks the drawer when pulled out, pushed in or folded down. Full 105-key, low-profile, sturdy keyboard included. Ultra-sturdy, tilt-free, two-piece rear bracket and extension design. On-screen display (OSD) control and adjustment. Use the chart below for cross-referencing the different INTELLINET NETWORK SOLUTIONS Rackmount Console KVM Switch models and their various part numbers and specifications. Console/ KVM Rear Brkt. KVM Model Drawer Module & Ext. Kit Console Port KVM Package No. Part No. Part No. Part No. Size Type Ports Ht. Contents 521796 Transa PRO 15 IMM108D REK7 15 PS/2 8 1U Console Rear brkt. & ext. kit KVM Switch Module 521871 Transa PRO 15 IKM116D REK7 15 PS/2 16 2U Power supply 6 PS/2 cable Combo Console 523561 Transa PRO 17 IUM108D REK7 17 (USB and/ 8 1U Rear brkt. & ext. kit or PS/2) KVM Switch Module Combo Power supply 523578 Transa PRO 19 IUM108D REK7 19 (USB and/ 8 1U 6 PS/2 cable or PS/2) 6 USB cable 2
CONSOLE ASSEMBLY Parts Three-Section Console: A. 1U slide drawer with keyboard, touchpad and LCD monitor. B. 1U or 2U KVM Switch Module. C. Rear bracket and extension kit. Rear Bracket and Extension Kit: Each Rackmount Console KVM Switch features a rear bracket and extension kit, which includes two pieces of rear brackets and two pieces of extensions. The enclosed kit fits cabinet depths of 67.5 80.5 cm (26 5 /8 31 5 /8 ), as measured between the inside of a rack cabinet s front and rear uprights. As shown at right, the brackets and extensions come in different lengths, and will vary depending on the model. Assembly 1. Choose a proper position for the rack drawer. Mount the rear brackets (from the rear bracket and extension kit), and loosely fasten them onto the rear vertical uprights of the cabinet as shown. Both will be removed later. 3
2. Remove the safety stopper from the console drawer. CAUTION: The safety stopper is designed to prevent the drawer from sliding out during transportation: Once it s removed, the drawer may slide out when tilted and cause serious injury or damage. 3. Slide the console drawer into the rack cabinet from the front and insert the two slide rails of the console drawer into the sleeves of the rear brackets. 4. Fasten the console drawer to the outside of the front vertical uprights using the four screws provided. The metal brackets (as indicated by the far arrow) support the rear side of the console. NOTE: The image at right is a front (console drawer-side) view. 5. Remove both of the rear brackets and slide the console drawer out halfway to balance its weight. At this point, the front brackets hold the console drawer. NOTE: The image at right is a rear (KVM switch module-side) view. 4
6. Attach the extensions (from the rear bracket and extension kit) to both sides of the KVM switch module. NOTE: For a 2U module (Model 521871), the extensions are mounted to the lower half of the module. In the inset at right, you can also see that the wider lip is the top of the plastic extension. 7. The rear brackets, extensions and slide rails need to fit tightly. As shown above-left, slide the rear brackets onto the extensions. Then, as shown aboveright, insert both sliding rails of the console drawer into the tight space formed by the rear brackets and the extensions. Holding the KVM switch module on both sides, push it in evenly. 8. Push the rear brackets all the way in and fasten them securely. 9. Slide the console drawer out to gain access to the connecting screws. Push the KVM switch module evenly toward the connector attached to the console drawer and lock both units together by tightening the screws indicated by the arrows. 5
10. Make sure the CEN36 connectors are firmly mated connector is secured firmly, leaving a slight gap as shown in the image at right. 11. Connect the power supply CEN36 to the power jack on the KVM switch module to complete the installation. CONSOLE INSTALLATION Connecting to a Computer Connecting to a KVM Switch 6
Console Panel The console panel of the Rackmount Console KVM Switch is located along the top of the keyboard. The image below represents the console panel for Models 521796 and 521871. 5 7 8 9 4 6 10 The image below represents the console panel for Models 523561 and 523578. KVM Control and Status Indicators: NOTE: This section is effective only when a KVM switch module is connected. 1. Computer Selection Pad Press one of these buttons to select a computer. For 16-port Model 521871, 1 8 are for the lower row of eight ports and A H are for the higher/upper row of eight ports. Port 1 and Port A share the same button: If Port 1 is already selected, tap its button to select Port A. If Port 1 is not selected, press and hold the 1 button on the console panel for two seconds to select Port A. 2. Selected Computer Indicator An indicator lights red when its corresponding computer is selected. 3. Local Console in Operation This lights green when a computer is accessed through the console. 4. Remote Console in Operation This lights green when a computer is accessed by a remote keyboard/mouse/monitor set. LCD Panel Controls: 5. LCD Panel Menu These buttons bring up the on-screen display menu of settings for the LCD panel. 6. LCD Panel Adjustment These let you adjust the settings for the LCD panel. 7 9. Number lock, caps lock and scroll lock indicators, respectively. 10. LCD panel power switch. 7
Replaceable Keyboard and Touchpad Replaceable Keyboard (Models 523561 and 523578 only): Triangular mark The keyboard is replaceable for language change or maintenance. Tilt it up, locate the mini-usb cable underneath the keyboard and gently unplug it. While installing a keyboard, make sure that you extend just enough of the cable to keep the keyboard flat inside the tray. NOTE: The triangular mark on the mini- USB connector must face out, as shown in the magnified image above. Replaceable Touchpad (Models 523561 and 523578 only): The touchpad simulates a wheel mouse. The area of the touchpad to the right side of the two small triangular marks is the simulated wheel, as shown at right. To remove the touchpad, press the tab underneath it upward to release the latch, then slide it outward till the touchpad can be lifted up clear of the notches, as shown below. The touchpad is attached by a piece of mini-usb cable. 8
Triangular mark To install the touchpad, extend just enough of the mini-usb cable and slide the touchpad all the way in till you hear a click as it locks in position. NOTE: The triangular mark on the mini-usb connector must face out, as shown in the magnified image. 9
LCD PANEL SPECIFICATIONS 15 LCD Panel 17 LCD Panel 19 LCD Panel Active display 304.1 x 228.1 337.92 x 270.336 376.32 x 301.056 area (mm) Pixel pitch (mm) 0.297 (H) 0.264 (per triad) 0.294 (H) x 0.297 (V) x 0.264 x 0.294 (V) Resolution 1024 x 768 1280 x 1024 1280 x 1024 @ 60/70/75 Hz @ 60/70/75 Hz @ 60/70/75 Hz Color pixel RGB vertical strip RGB vertical strip RGB vertical strip arrangement Display mode normally white normally white normally white Brightness (cd/m^2) 250 (center) 260 (center) 250 (center) Contrast ratio 350:1 450:1 500:1 Display color 16.2M (RGB 6-bits 16.2M (RGB 6-bits 16.7M + FRC data) + FRC data) (RGB 8-bits data) User control OSD control OSD control OSD control (auto-saving) (auto-saving) (auto-saving) Input signal RGB analog, RGB analog, RGB analog, H/V separate H/V separate H/V separate Plug and Play VESA VESA DDC 1/2B VESA DDC 1/2B VESA DDC 1/2B Power consumption 33 W max. 37 W max. 40 W max. (normal operation/ typical) Viewing angle -70 70 (H; -80 80 (H); -85 85 (H); (typical) -60 60 (V) -80 80 (V) -85 85 (V) Backlight unit 2 CCFLs edge-light 4 CCFLs edge-light 4 CCFLs edge-light (top/bottom) (top/bottom) (top/bottom) Temperature, operating 0 50 C (32 122 F) 0 50 C (32 122 F) 0 50 C (32 122 F) Temperature, storage -20 60 C (-4 140 F) -20 60 C (-4 140 F) -20 60 C (-4 140 F) Humidity, operating 0 95% relative 8 95% relative 8 95% relative Humidity, non-oper. 95% relative 95% relative 95% relative Power supply input Full range, Full range, Full range, voltage 100 240 V AC 100 240 V AC 100 240 V AC Power supply input 47 63 Hz 47 63 Hz 47 63 Hz frequency Approvals: CE, FCC for the product; UL, TUV, CE for the power supply NOTE: If part of the display is not clear, activate Auto Adjust for the LCD monitor using the four LCD panel control buttons. 10
NOTES 11
www.intellinet-network.com Are you completely satisfied with this product? Please contact your INTELLINET NETWORK SOLUTIONS dealer with comments or questions. Copyright INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.