Jabra Evolve 75 User manual
2017 GN Audio A/S. All rights reserved. Jabra is a trademark of GN Audio A/S. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Designed and engineered in Denmark Made in China MODEL: PHS040W / END040W Declaration of Conformity can be found on www.jabra.com/cp/us/declarations-of-conformity
1. Welcome...5 2. Overview...6 2.1 Included accessories 2.2 Optional accessories 3. How to wear...7 3.1 Replacing the ear cushions 3.2 Fold-flat storage 4. How to charge... 11 4.1 Using the charging stand 4.2 Using the USB charging cable 4.3 Battery status 5. How to connect... 14 5.1 PC 5.2 Smartphone 6. How to use... 16 6.1 What the buttons do 6.2 Multiple call handling 6.3 Voice guidance 6.4 Busylights 6.5 Active Noice Cancellation (ANC) 6.6 Listen-in 6.7 Factory reset 3
7. Software... 24 7.1 Jabra Direct 7.2 Suite for Mac 7.3 Update firmware 8. Support... 26 4
1. Welcome Thank you for using the. We hope you will enjoy it! JABRA EVOLVE 75 FEATURES Superior Active Noise Cancellation (ANC) Integrated busylight to enhance your productivity MultiUse connectivity to two Bluetooth devices, enabling you take calls and listen to music from the same headset HD voice and world class speakers Up to 30 meter/100 feet Bluetooth connectivity 5
2. Overview Busylight Listen-in USB charging port Mute Volume up Answer/end call Volume down Active Noise Cancellation (ANC) ANC LED Battery LED On/Off/ Bluetooth switch Bluetooth LED 6
2.1 Included accessories jabra Jabra Link 370 USB charging cable Charging stand (not supplied in all variants) Pouch Replacement accessories are available online at jabra.com/accessories. 2.2 Optional accessories Ear cushions Replacement ear cushions are available online at jabra.com/accessories. 7
3. How to wear Position the microphone close to your mouth (2 cm or 3/4 inch). The microphone is bendable for personal preference. 3/4" 2 cm Rotate the microphone up to mute, or down to un-mute. Mute Un-mute When the microphone is not needed, rotate it upwards and magnetically attach to the headband. 8
3.1 Replacing the ear cushions Rotate the ear cushions counter-clockwise and gently pry them off to completely remove them from the headset. To attach the new ear cushions, place them in the same position and rotate clockwise to lock them in place. Do not use or wear the headset when the ear cushions are not attached. Replacement ear cushions can be purchased via jabra.com/ accessories. 9
3.2 Fold-flat storage The earcups can be folded-flat for easy storage. 10
4. How to charge 4.1 Using the charging stand Plug the charging stand into a powered USB port on your PC, docking station, or wall charger, and then dock the headset. It takes approx. 3 hours to fully charge the headset. When the PC is turned off, the headset will continue to charge only when the charging stand is plugged into a powered USB port. 11
4.2 Using the USB charging cable Plug the supplied USB charging cable into a USB port on your PC, docking station, or wall charger. It takes approx. 3 hours to fully charge the headset. 12
4.3 Battery status To hear the current headset battery status, wear the headset and press the Volume up or Volume down button when not on a call or listening to music. BATTERY STATUS Full Medium Low/charging Critically low 13
5. How to connect 5.1 PC Plug the supplied Jabra Link 370 into a USB port on your PC. The and the Jabra Link 370 are pre-paired and ready for use out of the box. The Bluetooth range is up to 30 meters or 100 feet. jabra To hear music in the headset you may need to select the Jabra Link 370 as the playback device in your operating system s audio settings. To manually pair the with the Jabra Link 370, download and use Jabra Direct or Jabra Suite for Mac. 14
5.2 Smartphone Slide and hold the On/Off/Bluetooth switch in the Bluetooth position for 3 seconds and follow the voice-guided instructions to begin pairing the headset to your smartphone. 3 sec. The Bluetooth range is up to 10 meters or 30 feet (limited by your smartphone s Bluetooth connectivity). 15
6. How to use Busylight Listen-in USB charging port Mute Volume up Answer/end call Volume down Active Noise Cancellation (ANC) ANC LED Battery LED On/Off/ Bluetooth switch Bluetooth LED 6.1 What the buttons do RIGHT EARCUP Turn headset on/off Slide the On/Off/ Bluetooth switch to On or Off 16
Answer call Press the Answer/End call button End call Reject call Press the Answer/End call button Double-tap the Answer/End call button Volume up/down Battery status Mute/ un-mute microphone Turn voice guidance on/off Siri/Cortana/ Google Now Press the Volume up or Volume down button Press the Volume up or Volume down button, when not on a call or listening to music Press the Mute button, or rotate the microphone up/down Hold (5 secs) the Mute button Press the Mute button, when not on a call or listening to music Pair Bluetooth device Slide and hold (3 secs) the On/Off/ Bluetooth switch in the Bluetooth position 17
LEFT EARCUP Listen-in on/off Press the Listen-in button ANC on/off Press the ANC button 6.2 Multiple call handling The headset can accept and handle multiple calls at the same time. RIGHT EARCUP Put current call on hold, and answer incoming call Switch between held call and active call Reject incoming call, and continue current call Press the Answer/ End call button Press the Answer/ End call button Double-tap Answer/End call button 18
6.3 Voice guidance The voice guidance can be switched on/off by holding the Mute button for 5 seconds, or by using Jabra Direct software on your PC (jabra.com/direct). 5 sec. 19
6.4 Busylights The Busylights on the headset automatically light up red when you are on a call to indicate to colleagues that you are busy. To manually switch the Busylights on/off, press the Volume up and Volume down buttons simultaneously. 1 sec. To de-activate the Busylight function entirely, hold the Volume up and Volume down buttons simultaneously for 5 seconds. De-activating the Busylight function will prevent the use of the busylights. To re-activate the Busylight function, hold the Volume up and Volume down buttons simultaneously for 5 seconds. 20
6.5 Active Noice Cancellation (ANC) Active Noise Cancellation (ANC) reduces outside disturbance to a minimum, allowing you to fully focus on your work or call. Press the ANC button to switch Active Noise Cancellation on/off. 21
6.6 Listen-in Listen-in enables you to hear your surroundings without having to take off the headset. Your music and calls will be muted (but not paused) when Listen-in is on.. Press the Listen-in button to switch Listen-in on/off. 22
6.7 Factory reset Resetting the clears the list of paired Bluetooth devices and all personalized settings. To perform a factory reset, hold the Answer/ End call button and the Volume up button at the same time for 5 seconds. After the headset has been reset, you will need to re-pair it to the Jabra Link 370, or to your smartphone. 5 sec. 23
7. Software 7.1 Jabra Direct Jabra Direct is PC software designed to support, manage and enable optimal functionality for Jabra devices. Download via jabra.com/direct 7.2 Suite for Mac Suite for Mac is software designed to support, manage and enable optimal functionality for Jabra devices on Apple computers. Download via jabra.com/supportpages/jabra-suite-for-mac 24
7.3 Firmware update Firmware updates improve performance, or add new functionality to Jabra devices. 1. Connect the to a PC using the USB cable, charging stand, or Jabra Link 370. 2. Install Jabra Direct on your PC, or Suite for Mac on your Mac. 3. Use Jabra Direct or Suite for Mac to check for the latest firmware updates. 25
8. SUPPORT Find support for the or read the FAQ. at jabra.com/evolve75. 26
www.jabra.com/evolve75 REV A 27