LASER Laser Displacement Transducer Series LAH-G1 Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...4 Order Code...5 ranges up to 300 mm Resolution up to 0.5 μm Protection class IP67 Working temperature -10 bis +45 C External input setting function Analog output 0...10 V, 3.2...20.8 ma PNP or NPN output type 28.11.17
- 2 - TECHNICAL DATA center distance LAH-G103- LAH-G105- Diffuse reflection type LAH-G108- LAH-G112- LAH-G125- LAH-G103A- R Specular reflection type LAH-G105-A- R LAH-G108-A- R 30 mm 50 mm 85 mm 120 mm 250 mm 26.3 mm 47.3 mm 82.9 mm Measuring range ±4 mm ±10 mm ±20 mm ±60 mm ±150 mm ±2 mm ±5 mm ±10 mm Resolution 0.5 μm 1.5 μm 2.5 μm 8 μm 20 μm 0.5 μm 1.5 μm 2.5 μm Linearity ±0.1 % F.S. ±0.3 % F.S. ±0.2 % F.S. Temprerature characteristics ±0.08 % F.S. / C Light source Red semiconductor laser, Class 2 (Class 1 for specular reflection type) (IEC / JIS / FDA, Laser Notice No. 50) Max. output: 1 mw (peak emission wavelength: 655 nm) Max. output: 0.39 mw Peak emission wavelength: 655 nm Laser class class 2 class 1 Beam diameter [mm] 0.1 0.1 0.5 0.1 0.75 1.25 1.0 1.5 1.75 3.5 0.1 0.1 0.2 0.2 Receiving element Supply voltage Current consumption Sampling rate Analog output Output (OUT 1, OUT 2, OUT 3) Output operation Short circuit protection Output polarity setting input Timing input Multi input Indicator-Laser emission Indicator-Alarm CMOS image sensor 24 VDC ±10 % including ripple 0.5 V (P-P) Max. 100 ma 200 μs, 500 μs, 1 ms, 2 ms Voltage: 0 bis +10.5 V (normal), 11 V (Alarm) Output impedance: 100 Ω, Current: 3.2 bis 20.8 ma (normal), 21.6 ma (Alarm) impedance: max. 300 Ω Judgment output or alarm output (setting selectable), NPN transistor, open-collector / PNP transistor, open-collector (selectable): In case of using NPN output In case of using PNP output - Maximum sink current : 50 ma - Maximum source current : 50 ma - Applied voltage : 3 to 24 V DC (between output and 0 V) - Residual voltage : 2.8 V or less (at 50 ma of source current) - Residual voltage : 2 V or less (at 50 ma of sink current) Open when the output is ON. Incorporated (automatic restoration) NPN open collector output operates when 0 V is connected. PNP open collector output operates when 24 V DC is connected. NPN output operates when 0 V is connected and NPN is set (depending on settings). PNP output operates when external power + is connected and PNP is set (depending on settings). Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time. In case NPN output is selected, function varies according to the time 0 V is connected NPN. In case PNP output is selected, function varies according to the time external power + is connected. Green LED (lights up during laser emission) Orange LED (lights up when this product cannot measure because of insufficient or excessive light intensity) Indicator-Output Yellow LED x 3 Digital display Protection Ambient temperature Humidity Ambient light Insulation resistance Dialectric strength Vibration resistance Shock resistance Material Red LED 5.5 digit display IP67 (IEC) 10 bis +45 C (No dew condensation), Storage: 20 to +60 C (No dew condensation) 35 bis 85% RH, Storage: 35 bis 85% RH Max. 3000 lx Min. 20 MΩ by 250 VDC between all connections and housing 1000 VAC (Period: 1 Min) between all connections and housing 10 up to 55 Hz (Periode: 1 min.) frequency, 1.5mm amplitude in X-,Y- and Z-direction (for 2 hours) 500 m/s2 acceleration (ca. 50G) per three times in X-,Y- und Z-direction Enclosure: PBT, front cover: acrylic, cable: PVC
- 3 - TECHNICAL DRAWG LAH-G103/105/108/112/125 l) Beam-emitting 3.8 57 49.4 Article Code (l) LAH-G103 30 mm 30 Beam-receiving LAH-G105 50 mm 21 LAH-G108 85 mm 15 60 51.4 4.3 Cable: ø 6.85 Length: 5 m 10-core 0.1 mm 2 Insulator diameter: ø 0.7 mm LAH-G112 120 mm 11 LAH-G125 250 mm 6.2 LAH-G103A-R 26,3 66.6 17.5 34.41 72.3 Beamemitting 30 62.4 72.3 33 15 LAH-G105A-R 69 47.3 64.2 13.4 39.32 Beam-emitting 20.77 59.5 69 Article Code (l) LAH-G103A-R 26.3 mm 30 LAH-G105A-R 47.3 mm 20.77 LAH-G108A-R 82.9 mm 15.05 32.8 10.39 LAH-G108A-R 82,9 62.3 10.75 42.24 Beam-emitting 15.05 66.8 66.8 57.4 31.2 7.53 OPERATG ELEMENTS 5.5 digit LED display (Red) OUT 1 indicator (Yellow) Alarm indicator (Orange) OUT 2 indicator (Yellow) Laser emission indicator (Green) OUT 3 indicator (Yellow) ENTER key UP key DOWN key
- 4 - ELECTRICAL CONNECTION Analog output 100Ω +V 22Ω 0 11V 3.2 22mA Analog voltage output: A (V) (Shield) Analog ground: Analog current output: A (I) Analog input device Name Function Cable color A (V) A (I) Analog voltage output Analog ground Analog current output Analog ground Shield single conductor Shield single conductor Black Gray (Shield) Analog ground: NPN-Typ PNP-Typ 3.3V (Brown) +V OUT1: Output 1 (White) OUT2: Output 2 OUT3: Output 3 (Pink) TM: Timing Input (Pink/Purple) NPN/PNP type switching input External power supply 3 to 24V DC Main power supply 24V DC ± 10% Ripple 0.5 V (peak-to-peak) included (Brown) +V OUT1: Output 1 (White) OUT2: Output 2 OUT3: Output 3 (Pink/Purple) NPN/PNP type switching input (Pink) TM: Timing Input External power supply 5 to 3 DC Main power supply 24V DC ± 10% Ripple 0.5V (peak-to-peak) included 3.3V (Purple) MI: Multiple input (Purple) MI: Multiple input (Blue) Non-voltage contact (Blue) Non-voltage contact or PNP transistor open collector output or High [5V to 3 DC (inrush current of 0.04mA max.)]: Enabled Low [0 to 0.6V DC or open]: Disabled Name Function Cable color OUT1 Judgment output 1 Black OUT2 Judgment output 2 White OUT3 Judgment output 3 or alarm output Gray TM Timing input Pink MI Zero-set, Reset, Memory change, Teaching, Save, Laser control inputs Violet NP NPN / PNP type switching input Pink/Violet +V 24 VDC input for power supply Brown Power supply ground Blue
- 5 - ORDER CODE LAH A C5 range [mm] 26...34 40...60 65...105 60...180 100...400 G103 G105 G108 G112 G125 LAH RA C5 range [mm] 24,3...28,3 42,3...52,3 72,9...92,9 G103A G105A G108A WayCon Positionsmesstechnik GmbH email: info@waycon.de internet: www.waycon.biz Head Office Mehlbeerenstr. 4 82024 Taufkirchen Tel. +49 (0)89 67 97 13-0 Fax +49 (0)89 67 97 13-250 Subject to change without prior notice. Office Köln Auf der Pehle 1 50321 Brühl Tel. +49 (0)2232 56 79 44 Fax +49 (0)2232 56 79 45