2 Rack Unit (2 RU) Style FMT-G Series ADC has expanded its Fiber Management Tray (FMT) family to include two rack unit (2 RU) high trays (FMT-G series). Available for termination only (with adapters only, or preterminated with IFC or multifiber cable), and termination and splice, the FMT-G series features sliding adapter packs which allow easy access for connecting jumpers and cleaning connectors, ensuring that any fiber can be installed or removed without inducing a macrobend on an adjacent fiber. The FMT-G series is also available to house micro Value-Added Modules (MicroVAMs) for splitting and monitoring optical signals, providing additional flexibility and functionality. The trays are lockable, further ensuring integrity of the fibers by greatly reducing the chance for accidents.
Termination with Adapters Only The termination-only fiber management tray provides termination for 72 fibers in an all-front-access design. This tray mounts in 19-inch, 23-inch, or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. Connector/Adapter Style 9 SC Y LX.5 6 LC 2 FC ultra polish 7 SC ultra polish F FC angled polish J SC angled polish L FC with zirconia adapter N SC with zirconia adapter 8 LC ultra polish X LX.5 angled polish 72-Termination with Adapters Only FMT-GRT0 0 0 - A72 Faceplate Color B Black P Putty Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Adapters Loaded A Adapters loaded 0 No adapters Sliding Adapter Pack Shown in Access Position 2
Termination with IFC or Multifiber Cable The termination-only fiber management tray provides termination for 72 fibers and can be ordered preterminated with IFC or multifiber cable. This tray mounts in 19-inch, 23-inch or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. Cable Type C IFC stranded (62.5/125) Y IFC stranded (50/125) A IFC stranded M IFC ribbon H Indoor/outdoor Connector/Adapter Style 9 SC Y LX.5 6 LC 2 FC ultra polish 7 SC ultra polish F FC angled polish J SC angled polish L FC with zirconia adapter N SC with zirconia adapter 8 LC ultra polish X LX.5 angled polish 72-Termination with IFC or Multifiber Cable FMT-GN7 - A 7 2 Faceplate Color B Black P Putty Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Length (in meters) 3
Termination and Splice The termination and splice tray terminates and splices 48 fibers in an all-front-access design. This tray mounts in 19-inch, 23-inch, or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. Panels loaded with pigtails come with color-coded 900 micron pigtails. Connector/Adapter Style 9 SC Y LX.5 6 LC 2 FC ultra polish 7 SC ultra polish F FC angled polish J SC angled polish L FC with zirconia adapter N SC with zirconia adapter 8 LC ultra polish X LX.5 angled polish Cable or Adapter Type A Adapters only 0 No adapters C pigtails (50/125) K pigtails (62.5/125) U Maxi-Strip pigtails FMT-GTL 0 0 - A48 48-Termination/Splice Faceplate Color B Black P Putty Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Chip Style (mini splice tray) 0 None 2 Heat shrink 3 Mechanical 4
Sliding Adapter Packs Ordering Information Description SC LC LX.5 FC ultra polish SC ultra polish FC angled polish SC angled polish FC with zirconia adapter SC with zirconia adapter LC ultra polish LX.5 angled polish Accessories Ordering Information Description Cable clamp kits.25" offset from frame 1.25" offset from frame Vertical cable guides Black Putty FMT-6SAP09 FMT-6SAP06 FMT-6SAP0Y FMT-6SAP02 FMT-6SAP07 FMT-6SAP0F FMT-6SAP0J FMT-6SAP0L FMT-6SAP0N FMT-6SAP08 FMT-6SAP0X FMT-ACCCLMP01 FMT-ACCCLMP02 FMT-ACC21B FMT-ACC21P Cable FMT-ACCCLMP02 1.25" Offset from Rack Cable Rack FMT-ACCCLMP01 0.25" Offset from Rack Vertical Cable Guide Cable Clamp Kit 5
Micro Value-Added Module System The 2RU FMT Value-Added Module (VAM) chassis houses up to twelve MicroVAMs. These MicroVAMs are used for testing and monitoring optical signals; technicians can access both directions of the signal without disrupting service. MicroVAM Shown in Access Position Ordering Information Description 2 RU Fiber Management Tray (FMT-G Series) accommodates up to 12 MicroVAMs for monitoring optical signals FMT-G Series with MicroVAM FMT-GVM00000-A72P Ordering Information for Micro Value-Added Modules follows on the next page. 6
Micro Value-Added Module System Monitor Module Ordering Information FMT-M 1 0 0 0 Input Connector/Adapter 2U FC ultra polish 2A FC angled polish 7U SC ultra polish 7A SC angled polish LA LX.5 angled polish KU LC ultra polish or ** 9A SC 50/125 9B SC 62.5/125 LM LX.5 PM LC Output Connector/Adapter 2U FC ultra polish 2A FC angled polish 7U SC ultra polish 7A SC angled polish LA LX.5 angled polish KU LC ultra polish ** or 9A SC 50/125 9B SC 62.5/125 LM LX.5 PM LC B Customer Premises Monitor Module XX% SPLITTER B XX% RxM J Dual Monitor Cross-Connect Module Style B Cross-connect customer premises J Dual monitor S Splitter module Split Ratio A 90/10 B 95/05 C 50/50 H 70/30 J 60/40 K 99/01 L 98/02 Monitor Connector Type 2U FC ultra polish 2A FC angled polish 7U SC ultra polish 7A SC angled polish LA LX.5 angled polish KU LC ultra polish or ** 9A SC 50/125 9B SC 62.5/125 LM LX.5 PM LC Contact ADC at 1-800-366-3891, for specifications and available split ratios. Mon Tx Mon Rx S Splitter Module A1 TxM A2 XX% SPLITTER A XX% RxN TxN Tx Rx A B1 CUST Tx Tx SRC B2 SRC Tx Rx SRC B 7
Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 For a listing of ADC s global sales office locations, please refer to our web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 1258896 3/03 Original 2003 ADC Telecommunications, Inc. All Rights Reserved