U S E R I N T E R F A C E S O L U T I O N S P R O D U C T I N F O R M A T I O N 5-inch XGA Dual Video Interface Touch Panel Monitor UT3-B5 Series No.-0093e Issued: April, 200 The UT3-B5 Series are touch panel monitors with a 5-inch XGA (024 x 768 pixels) TFT color LCD module as the same as the UT3-5 Series. Renewed design has improved functionality and performance, and has realized a variety of forms. The UT3-B5 Series are functionally compatible with the UT3-5 Series, and they are equipped with two video ports - an analog RGB and a digital visual interface (DVI-D). They supports two different touch panel interfaces, the RS-232C and the USB. The UT3-B5 Series are optimal touch panel monitors for a wide variety of applications. Bezel, Case and Stand Type Stand Monitor Type Bezel Type Bezel and Case Type Features Use the industry's first (*) LED backlit LCD as for industrial use.. Power consumption by half compared to our current product. 2. Long life, and lifetime value;,000 hours (LED % of rated light, ambient temperature of 25 deg. C, the ability estimates) 3. Fine brightness adjustment (adjustment range: to %) can further extend operating life and saving the power consumption. 4. Without use of mercury and environmentally friendly. The RAS functions (*2) can improve equipment utilization.. With touch panel fault information, alarm output is capable (*3). Easy set up with the original software.. Can update the firmware from the host PC. 2. Power save settings. 3. Touch panel driver can control two screens including in combination with a different type touch panel. 4. The touch panel driver supports Windows (R) 7 (32bit version), Windows Vista (R) (32bit version), and Windows (R) XP. (*4) Support of Standards: RoHS, CE, VCCI-B, CCC (pending) Open Frame Type Optical Touch Panel and Open Frame Type * Our check as of March 200. *2 RAS is a concept for increasing reliability with considering ()Reliability, (2)Availability, (3)Serviceability. *3 Only for optical touch panel used type. *4 Windows (R), Windows Vista (R) are registered trademarks of Microsoft Corporation in the United States and other countries. Made-to-order Product Product Number Series UT3-B 5 NN X 3 R D N - * Version Mark Screen Size No. Size 5 5 in. Form, Color Mark Form, Color NN Open Frame FW Bezel RW Bezel and Case SW Bezel, Case and Stand Resolution Mark Resol. X XGA Power No. Volt. 3 2 to 24 VDC X AC Power Adapter Touch Panel Mark Type R Resistive I Infrared N None Protection Mark Class N IP42 A IP65* Touch Panel Interface Mark Type D RS-232C/USB Dual (Selective) N None JAE is of ISO 9000 (Quality management and quality assurance standards) and ISO 400 (Environmental management systems) certified. * IP65 is applicable for Optical Touch Panel Type only.
Touch Panel Monitor UT3-B5 Series Common Specifications Power Operating Temperature Storage Temperature Operating Ambient Humidity Cooling Display Size Active Area Number of Pixels Pixel Pitch Number of Colors Brightness Viewing Angle Backlight Video Signal Mode Video Signal Synchronizing Signal Display Mode Video Interface Touch Panel Interface Power Supply Connector +2 to +24 VDC +/- 5% 6 W max. 0 to + deg. C -20 to +60 deg. C 85% RH max. (No condensation) Air cooling 38 cm diagonal (5-inch) TFT-LCD (Color) 304. mm (H) X 228. mm (V) 024 X 768 pixels 0.297 mm X 0.297 mm 6.77 million colors (*) 3 cd/m 2 (Value as LCD Module) Right / Left: 80 deg., Up / Down: 80 deg., (Contrast ratio 0: min., Value as LCD Module) White LED Analog RGB / DVI-D Analog 0.7 Vp-p (Input impedance ohms) / DVI Standard compliant TTL (Analog RGB) 024 X 768, 800 X 600, 640 X 480, 720 X 400 (VGA Text) Analog RGB (Mini D-sub 5-pin) / DVI (DVI-I 29-pin) RS-232C (D-sub 9-pin) / USB2.0 (Full Speed 2 Mbps, B connector) -78295-2 (Pin type) / LGP653-0800F (DC Power Jack - + / for 2 VDC) Individual Specifications Open Frame Bezel Bezel and Case Bezel, Case and Stand Stand Monitor (No Touch Panel) Optical Touch Panel and Open Frame Type Product Number Outline Dimensions Weight Protection Class Audio Input Speaker Touch Panel Type Touch Panel Resolution Touch Panel Output Touch Panel Operating Force * The actual display colors depend on the display capacity of the computer connected. *2 Between bezel and panel, in the front only. *3 Number of optical elements. Double, quad-precision. UT3-B5NNX3RDN-A UT3-B5FWX3RDN-A UT3-B5RWX3RDN-A UT3-B5SWXXRDN-A UT3-B5SWXXNNN-A UT3-B5NNXXIDA-A 34.6 X 257.2 X 43.3 mm X X 47.5 mm X X.5 mm X 358 X 200 mm 356 X 273 X 53.2 mm 2.6kg max. 2.9kg max. 3.2kg max. 6.0kg max. 2.9kg max. IP42 (*2) IP65 (*2) 3.5 mm in dia. Stereo Mini Jack W + W (Stereo) Resistive Infrared 024 X 024 / 024 X 768 52 X 39 (*3) Switch address output (ASCII code) Switch address output (ASCII code).47 N ( gf) min. 2
Touch Panel Monitor UT3-B5 Series Outline Dimensions (Unit: mm) - Open Frame Type - 43.3 7.8 69.8 9.9 0 4-M3 Burring (Both sides) Screw 5 mm long max. 28.6 257.2 2.5 28.6 2 3 4 5 6 3.4 40.9 5 27.5 4.5 37.5 22. USB Interface 3 RS-232C Interface 4 Analog RGB Interface 5 Power Supply (2 VDC Type) 6 DC Power Jack (for 2VDC) - Bezel Type - 47.5 288 2.5 2 3 4 5 6 7 Dimensions of Panel Opening (Reference) 333.6 (67.8) USB Interface 3 Audio Input 4 RS-232C Interface 5 Analog RGB Interface 6 Power Supply 7 DC Power Jack (for 2VDC) (54.85) (29.6) 2.25 259.2 285.6 (7.8) 343.6 3
Touch Panel Monitor UT3-B5 Series Outline Dimensions (Unit: mm) - Bezel and Case Type - 29.5 40.5 200 Top LC 358 25 2.5 2 3 4 5 6 7 USB Interface 3 Audio Input 4 RS-232C Interface 5 Analog RGB Interface 6 Power Supply 7 DC Power Jack (for 2VDC) - Bezel, Case and Stand Type / Stand Monitor Type - 4-5 in dia. 40.5 Tilt Rotation Angle 30 deg. 200 The intereface is the same as the bezel type. * 4
Touch Panel Monitor UT3-B5 Series Outline Dimensions (Unit: mm) - Optical Touch Panel and Open FrameType - 29.8 53.2 9.9 78 78 0.7 4-M3 Burring (Both sides) Screw 5 mm long max. 36.5 84 257.2 2.5 36.5 76 28.6 2 3 4 5 6 USB Interface 3 RS-232C Interface 4 Analog RGB Interface 5 Power Supply (2 VDC Type) 6 DC Power Jack (for 2VDC) Before placing an order. The values specified in this catalogue are only for reference. The products and specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. 2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the equipment. 3. The products presented in this catalog are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability. ()Applications that require consultation: (i)please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii)we may separately give you our support with a quality assurance program that you specify, when you think of a use such as: Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2)Recommended applications include: Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc. -9, Aobadai 3-Chome, Meguro-ku, Tokyo 53-8539 JAPAN Contact to: st International Operations Division Phone: +8-3-3780-2932 FAX: +8-3-3780-2770 Osaka Branch, Osaka City Chubu Branch, Toyota City Sendai Office, Sendai City Utsunomiya Office, Utsunomiya City Shizuoka Office, Shizuoka City Fukuoka Office, Fukuoka City Phone: +8-6-6447-5258 FAX: +8-6-6447-5276 Phone: +8-565-34-0600 FAX: +8-565-34-0840 Phone: +8-22-225-85 FAX: +8-22-225-8059 Phone: +8-28-637-8545 FAX: +8-28-637-8546 Phone: +8-54-283-0664 FAX: +8-54-283-993 Phone: +8-92-262-888 FAX: +8-92-262-0 [URL: http://www.jae.co.jp] JAE User Interface Solutions Div. Proprietary. Copyright (C) 200-20, Japan Aviation Electronics Industry, Ltd. 5