Automation Technology > Industrial Communication > Industrial Ethernet > RUGGEOM Serial Device Servers > RUGGEOM RS16 managed 6GK601-6AT1.-... RUGGEOM RS16NC Technical Data Product-type designation Product description RUGGEOM RS16NC RUGGEOM RS16NC serial device server with an integrated fully managed Ethernet switch, 56-bit Encryption, up to 16 serial ports & up to Ethernet ports, Copper or Fiber options, Supports IEEE 1588 v2, n-blocking, store and forward switching THE RUGGEOM RS16NC IS AN INDUSTRIALLY HARDENED SERIAL DEVICE SERVER WITH AN INTEGRATED, FULLY MANAGED, ETHERNET SWITCH, DESIGNED TO OPERATE RELIABLY IN ELECTRICALLY HARSH AND CLIMATICALLY DEMANDING ENVIRONMENTS. 56-BIT ENCRYPTION; UP TO 16 SERIAL PORTS & UP TO ETHERNET PORTS, COPPER OR FIBER OPTIONS; SUPPORTS IEEE 1588 V2; NON-BLOCKING, STORE AND FORWARD SWITCHING Transmission rate Transfer rate Transfer rate Interfaces 1 10 Mbit/s 2 100 Mbit/s in accordance with RS 232 in accordance with RS 22/85 according to V.90 Number of electrical/optical connections / for network components or terminal equipment / Number of electrical connections for network components and terminal equipment for serial interfaces / in accordance with RS 232/RS 22/RS 85 / 300 115200 bit/s 300 115200 bit/s 56000 bit/s 16
for signaling contact 1 for power supply 1 for redundant power supply 1 Design of electrical connection for network components and terminal equipment for signaling contact for power supply Number of optical connections / for network components or terminal equipment / Number of optical connections / for fiber-optic cables at 10 Mbit/s at 100 Mbit/s Design of optical interface / for optical waveguide at 10 Mbit/s at 100 Mbit/s Range / at the optical interface / depending on the optical fiber used Signal-Inputs/outputs Operating voltage / of signaling contacts / at AC / rated value Operating current / of signaling contacts / at AC / Operating voltage / of signaling contacts / at / Operating current / of signaling contacts / at / Supply voltage, current consumption, power loss product options / wide range power supply Type of voltage supply Type of voltage / 1 / of the supply voltage Supply voltage / 1 Type of voltage / 2 / of the supply voltage Supply voltage / 2 Type of voltage / 3 / of the supply voltage Supply voltage / 3 nominal value Type of voltage / / of the supply voltage Supply voltage / RJ5-Port, SUB-D 9 pin 10-pole terminal block 10-pole terminal block ST-Port (BFOC-Port) ST-/SC-/MTRJ-/LC-Port 2 90 km 250 V 0. A 30 V 2 A True Dual Redundant Parallel Load Sharing (Optional) 2 V 18 36 V 8 V 36 59 V 110 V 88 300 V AC
85 265 V Product component / fusing at power supply input Power loss Permitted ambient conditions Ambient temperature 15 W during operating -0 +85 C during storage -0 +85 C during transport -0 +85 C Comment Relative humidity / at 25 C / without condensation / during operating / Coating operating condition / fanless operation Protection class IP Design, dimensions and weight Design A operating temperature of +85 C is permissible for a duration of 16 hours 95 % conformal coating optional IP0 19-inch rack Width 66.7 mm ( 18.37 in ) Height mm ( 1.73 in ) Depth 315 mm ( 12. in ) Net weight Material / of the enclosure Type of mounting 5.2 kg 35 mm DIN rail mounting S7-300 rail mounting Installation 19 inch wall mounting product component part / integrated / Ethernet switch product function DNP 3.0 to DNP conversion via UDP/TCP Modbus RTU to Modbus TCP conversion RAW socket mode for any serial protocols DNP3 GVRP HTTP Modbus TCP TFTP Product function / CLI Product function / RMON Product function / web-based management / Telnet 18 AWG galvanized steel enclosure
Product function / MIB support SNMP v1 SNMP v3 product function / for MIB-support by BRIDGE-MIB by IF-MIB by RMON-MIB by RSTP-MIB by SNMPv2-MIB by SNMPv2-SMI by SNMPv2-TC by TCP-MIB by UDP-MIB Number of VLANs / 255 Product function / VLAN - port based Product function DHCP Option 82 product function redundancy procedure MSTP RSTP redundancy protocol erstp MSTP RSTP Product function / IEEE 802.1x (radius) / SSL NTP SNTP Standards, specifications, approvals Standard for EMC RFC193 RFC2863 RFC2819 draft-ietf-bridge-bridgemib-smiv2-03 RFC1907 RFC2578 RFC2579 RFC2012 RFC2013 FCC Part 15 (Class A), EN55022 (CISPR22 Class A) for safety / of CSA and UL UL 60950-1, CSA C22.2 no. 60950-7 for hazardous area / of CSA and UL Hazardous Locations: Class 1 Division 2 for emitted interference EN 61000-6- (Class A) for interference immunity EN 61000-6-2 Laser protection class Complies with 21 CFR Chapter 1, Subchapter J Verification of suitability EN 61000-6-2, EN 61000-6-10 Verification of suitability regarding NEMA TS 2
CE mark C-Tick IEC 61850-3 Further Information / Internet Links Internet link to website Industry Mall/RUGGEOM Selector Industry Mall selection instrument cables and connectors CAx-Download-Manager industrial communication Information und Download Center image database Industry Online Support http://ruggedcomselector.automation.siemens.com http://www.siemens.com/industrialcontrols/mall http://www.siemens.com/snst http://www.siemens.com/cax http://www.siemens.com/simatic-net http://www.siemens.com/automation/net/catalog http://automation.siemens.com/bilddb http://support.automation.siemens.com letzte Änderung: Feb 2, 201 Siemens AG 201 - Corporate Information - Privacy Policy - Terms of Use