Conbrov T19 Keychain Mini Spy Camera User Manual Model No.: T19
Table of Contents Part 1 Before First Use...1-2 Part 2 Quick Guide...3 Part 3 Detailed User Manual...4-19 Part 3 Detailed User Manual Safety Precautions...4 Warning on Invasion of Privacy...5 What s Included...6 T19 Diagram... 7 Before Using Your Conbrov T19 Camera... 8-11 How to Use Your Conbrov T19 Camera... 12-14 1. Turn on the Camera /Record a Video...12 2.How to Turn On/Off Motion Detection Recording... 13 3. How to Switch into Night Vision... 14 4. How to Play the Video... 14 Other Tips...15 How to Reset the Camera......15 LED Status...16 Technical Specifications...17 FAQs...18 Warranty... 19 Disposal...19 Declaration of Conformity...19
Part 1 Before First Use Charging the camera Before the first use, charge the camera via your PC or USB charger (Power adapter should be no more than 5V/1A). Formatting the microsd Before the first use, format the microsd to FAT32 format. And insert the microsd before use. The camera support up to 32GB card capacity. 1
Part 1 Before First Use Resetting the camera If the camera malfunctions for any reason, reset it with the included pin. A small paperclip can also be used. 2
USB2.0 Part 2 Quick Guide A.Install the microsd Card B.Turn on/record a video ON lights flash blue 3 times and then turn off, the camera is in video recording standby mode. C.Save a Video/Turn off D.Play the Video 1 OFF lights flash alternating red and blue and then turn off. 2 For more detailed information, see Part 3: Detailed User Manual. 3
Safety Precautions Read this instruction manual carefully before using the camera. It contains important information for your safety as well as operating and maintenance instructions. Follow all safety precautions in order to prevent damage due to improper use of the camera. Keep this user manual carefully for future use. Should this camera be passed along to a third party, this user manual must be handed on as well. Use the camera only for its intended purpose. In the event of improper use or erroneous handling, no liability can be assumed for any possible damage which may occur. Never try to repair the camera yourself. Only allow qualified personnel to repair the camera in the event of malfunctions. Warning! Never immerse the camera in water or other liquids while cleaning or operating it. Never hold the product under running water. Do not open the housing under any circumstances. Do not introduce any metal objects into the interior of the housing. Never use accessories which are not recommended by the manufacturer. Keep the camera away from all hot surfaces and naked flames. Protect the camera from extreme heat and cold, dust, direct sunlight, humidity and drops or jets of water. Do not place any heavy objects on the camera. The manufacturer is not responsible for any missing video data due to maloperation, microsd card malfunctions, camera angle limitation, etc. 4
Warning on Invasion of Privacy The camera should be used for legal purpose only. Follow the laws of your country.recording and circulating an image of an individual may constitute an infringement of their privacy for which you could be liable. Ask for authorization before filming individuals, particularly if you want to keep your recordings and/or circulate images on the Internet or any other medium. Do not circulate a degrading image or one which could undermine the reputation or dignity of an individual. 5
Conbrov T19 Car Key Mini Spy Camera User Manual Model No.: T19 What's Included Camera User Manual USB Cable Card Reader Pin 6
940LED InfraredLigh LED Indicator T19 Diagram Micro SD Card Slot 7
Before Using Your Conbrov T19 Camera 1. Charging your camera Steady yellow Off Flashing blue and red Charging Fully charged Low power (1)Charge the camera via your PC or USB charger 5V/1A. (2)Connect the supplied USB cable to the Micro USB port and a suitable USB port on your PC or a USB charger (separate charger not included). The camera must turn off during charging. (3)While charging, the LED lights up yellow and turns off when the camera is fully charged. 2. Installing the microsd (with the contacts facing down) 8
Before Using Your Conbrov T19 Camera Caution! Format the microsd before use. Doing this, however, will remove all data from the card. Make sure to back up any data before formatting. (1)Only support a Class 10 microsd with at least 8GB capacity for recording. (2)Do not connect or remove the microsd during operation, this will damage both card and camera. (3)Do not force the microsd into the microsd slot, this will damage both card and camera. It only goes in one way. (4)Ensure that the microsd clicks into place when inserting it. To remove the microsd, slightly pull it out from the slot. 9
Before Using Your Conbrov T19 Camera 3. Setting the day and time Insert the micro SD card into the card reader and connect the card reader to your PC. After a few seconds the micro SD card will show as a removable disk. Open the SETTIME.TXT file. SETTIME The following menu will be displayed: File name Time format: yyyy-mm-dd, hh:mm:ss yes: loop recording on microsd no: no loop recording SETTIME.TXT file Edit Format View Help 2016-07-15,23:59:59 yes Modify date and time on the computer. After setting date and time, click on File and then on Save. Please do not add any blank or characters to change the existing format. 1 2 SETTIME.TXT File Edit Format View Help New Open Save Save as Page settings Print Exit 10
Before Using Your Conbrov T19 Camera Note: If you cannot find the file SETTIME.TXT after opening the microsd on the computer, please record a video clip to activate the card and set the date and time again. The date and time will remain accurate unless the battery has been depleted for long time. 11
How to Use Your Conbrov T19 Camera 1. Turn On the Camera /Record a Video (1) Press and hold the for 2 seconds to switch the camera on. The LED will flash BLUE 3 time and then turn off, which indicates that it is in video recording standby mode. ON lights flash BLUE 3 times and then turn off, the camera is in video recording standby mode. (2) Press and hold the for 2 seconds to switch the camera off. The LED will flash alternating RED and BLUE and then turn off. OFF lights flash alternating RED and BLUE and then turn off. Note: If the camera switches off automatically, there are two reasons: 1. The battery power is too low and the camera must be charged. 2. The camera has been in standby mode without any operation for longer than 1 minute. In this case, the camera switches off to save battery power. 3.If no microsd is inserted, the LED will flash blue for 10 seconds. 12
How to Use Your Conbrov T19 Camera 2.How to Tun On/Off Motion Detection Recording (1) Press and hold the for 2 seconds to switch the camera into Motion Detection Mode. The LED will flash BLUE 1 time and turn off, then flashes RED 3 times and the RED light will stay on, which indicates that it is in Motion Detection Mode. ON lights flash BLUE 1 times and then turn off,then flashes RED 3 times and the RED light will stay on, which indicates that it is in Motion Detection Mode. (2) Press and hold the for 2 seconds to turn off Motion Detection. The LED will flash alternately RED and BLUE 1 time and then go off. OFF lights flash alternating RED and BLUE 1 time and then go off. 13
How to Use Your Conbrov T19 Camera 3. How to Switch into Night Vision When ambient light brightness is lower than 20LUX, the camera will automatically switch into night vision and the video is black and white. 4. How to Play a Video Connect the T19 camera to computer, press and hold the Power Button for more than 2 seconds, the LED will flash red and the blue light will stay on. Or take out the microsd, insert it into the card reader (included), then connect the card reader to computer. After a few seconds, there will be a removable disk shown on computer. Open it, and then you'll see the Video files. Open them to play the video. 1 USB2.0 2 14
Other Tips How to Reset the Camera Use the supplied pin or similar tool (like a paperclip) to reset your camera in case of a malfunction. Press and hold the Reset Button for several seconds to reset the camera to standard factory settings. 15
LED Status Charging Turn off Operation Turn on/video recording Motion detection activated Motion detection standby Read the disk indicator No microsd card connected Reset Low battery power LED status indication Steady yellow and goes off once fully charged. LED flashes blue 3 times and turns off. LED flashes alternately red and blue and then go off. LED flashes blue and turns off, then flashes red 3 times. The red light will stay on. The blue light will stay on,and flashes red. LED flashes blue for 10 seconds, and the camera turns off. LED of corresponding modes all are off and the camera turns off. LED flashes red for 10 seconds, and the camera turns off. 16
Technical Specifications Adapter D C/5V Battery capacity 800 mah Camera angle 60 Night vision range 4 m Motion detection standby time 1 year Day recording power consumption 130mA Day continuous recording time 5 hours Night recording power consumption 400mA Night continuous recording time 2 hours Charging time 2 hours Image quality 720P Max storage capacity microsd card 32GB Loop recording optional PIR detection distance 5m PIR detection angle 45 Video format AVI USB port Micro 5P 17
FAQs 1. Q: What should I do if all function buttons cannot work? A: Reset the camera. 2. Q: Why the camera cannot be read when connected to PC? A: Check the USB port of the computer for correct connection and damages. A: Check the USB cable for damages. A: Test the speed and running condition of the computer itself and restart the computer. A: Pluck the USB cable, reset the camera as described in Chapter Resetting the camera. 3. Q: Why videos cannot be played or no pictures? A: Use a different media player or try to restart your computer. 4. Q: Date/time has been modified but why still not update on the video? A: Save the modified time. Modify the time without changing the date and time format. 5.Q: Why does SD card not save videos or video files appear 0KB with no content? A: Re-format the SD card, or use other brand SD card, it is recommended to use 16GB / 10ClaSS or above. 6.Q: I record something at night, why night vision videos are dark with no images? A:Check the night vision lights light or not, and then reset the camera. 7.Q: Why the camera will not automatically overwrite the older video files when the microsd card fills to capacity? A: Check the SETTIME text document second line whether the default YES, if not, need to be modified to YES. 18
Warranty All products sold by the Conbrov Group are covered by a 12-month full replacement warranty. Happy with it? Share your experience with an Amazon review. Or any questions? Our friendly customer services team are ready to help: support@conbrov.com Contacting us via the above email address is the quickest way to reach our support team. For the electronic user manual and more information, please visit: Disposal Electrical products should not be discarded with household waste. According to the European Directive 2012/19/EC on waste electrical and electronic equipment and its implementation into national law, electrical products used must be collected separately and disposed of at collection points provided for this purpose. Talk with your local authorities or dealer for advice on recycling. Declaration of Conformity Conbrov Electron Co., Ltd., Room 908 Huiyicaifu Center, c/o Queshan and Longhua Roads, Shenzhen, China, declares under our sole responsibility that the product Starlight Mini Camera T19, to which this declaration relates, meets all relevant European standards and directives. For the complete declaration of conformity visit our website www.conbrov.com. 19
Trademarks All trademarks or registered trademarks are the property of their respective owners. About Us Conbrov Electron Co., Ltd. founded in 2003 is an innovative technology research company specialized in personal surveillance cameras and on-dash cameras. Conbrov products and technology are patent protected by PCT or U.S. Patent Office. Based on years of professional experience and knowledge, we are able to provide the best and most efficient products and customer service. Manufacturer Conbrov Electron Co., Ltd. Room 908 Huiyicaifu Center, c/o Queshan and Longhua Roads Shenzhen, People's Republic of China 20