ata Sheet FCN-28 series Not for New esign ata Sheet Fujitsu Narrow Pitch Stacking Connector FCN-28 Series Fujitsu board-to-board narrow pitch stacking connector for use in measurement and factory automation control equipement Overview Fujitsu s FCN-28 board to board connector has a narrow pitch (.8mm). The unique structure prevents insertion problems and it s easy lock structure provides tactile feedback when mated/unmated, an important consideration in industrial applications.. Features Terminal pitch.8mm 2.mm effective mating length provides high connection reliability Stacking height 18mm Surface mount Fitting metals included to mount onto PCB Structure prevents misinsertion Easy lock structure with tacticle feedback Tape added to interface with connector for vaccum pick and place FCN-28 series connector Item Specification Operating temperature range -55 C to +85 C (includes temperature rise by current) Max. current.5a Max. voltage 1VAC Contact resistance 45mΩ maximum (1mA, 2mVC) Insulation resistance 1,MΩ minimum (1VC) ielectric withstanding voltage 5VAC, 1 minute Insertion force 3-pin: max. 28. N, 4-pin: max: 32. N, 6-pin: max: 4 N Withdrawl force 3-pin: min. 2. N, 4-pin: min: N, 6-pin: min: 3.5 N Item Material, Surface treatment Insulation material LCP resin, UL94 V- Conductor Copper Alloy Surface treatment Contact: Gold plating (Pagos ) Terminal: Gold coat Metal fitting Copper alloy (tin plating) Vaccum tape Polyimide film / acrylic pressure sensitive adhesive Page 1 of 5
ata Sheet FCN-28 series Ordering code FCN- 28 8 M 3 G / -T (a) (b) (c) (d) (e) (f) (g) (h) (a) Fujitsu Component connector (b) 28 series connector (c) Terminal 8: SMT (d) Body: M: Plug F: Socket (e) Number of pins: 3, 4, 6 (f) G: Gold plating (g) : Stacking height 18mm (h) T: With vaccuum tape Board-to-board connection Parallel PCB connection 18mm Plug Socket FCN-288M -G/-T FCN-288F -G/-T Page 2 of 5
ata Sheet FCN-28 series Straight Plug imensions A.8 7 5 1 B 3.8 9.45 Height from PCB surface 6 1.1.7 Tolerance is ±.5mm unless otherwise specified. Mounting hole layout +.5 φ1.2 (T.H.) E ±.1.8 ±.3 (n-1).5 +.5 2.4 ±.1 +.5 φ.8 (T.H.).5 2.4 etail A +.1 ±.1 6.95 5.4 (6) Connector Center line 5.4 ±.5 2.15 ±.5 ±.3 Connector outer line (note1) (Note 1): pattern distributing, pat, silk printing are prohibited in this area. Please apply resist processing. (Note 2): dashed line ( ) shows recommended metal mask. Aperture ratio: 1% mask thinkcness.15mm Part numbers and dimensions No. of immensions (mm) pins Part number n A B E MOQ 3 FCN-288M3-G/-T 15 2.6 14.2 (17.2) 16.2 16.8 56 4 FCN-288M4-G/-T 2 24.6 18.2 (21.2) 2.2 2.8 56 6 FCN-288M6-G/-T 3 32.6 26.2 (29.2) 28.2 28.8 48 Page 3 of 5
ata Sheet FCN-28 series Socket imensions Vacuum tape A.8 Contact pitch 1 B 3 8.55 (height from PCB surface) 4.8 5.7 7 5 6 φ.7 φ1.1.8 Tolerance is ±.5mm unless otherwise specified. Mounting hole layout.8 +.5 (T.H.) E.1.8.3 x(n-1).5 +.5.1 1.2 +.5 etail A (T.H.).5 (note2) 2.4 (note2) (6) 5.4.1 6.95 +.1 connector center line connector (note1).5 2.15.5.3 (Note 1): pattern distributing, pat, silk printing are prohibited in this area. Please apply resist processing. (Note 2): dashed line ( ) shows recommended metal mask. Aperture ratio: 1% mask thinkcness.15mm Part numbers and dimensions No. of immensions (mm) pins Part number n A B E MOQ 3 FCN-288F3-G/-T 15 2.6 14.2 (17.2) 16.2 16.8 56 4 FCN-288F4-G/-T 2 24.6 18.2 (21.2) 2.2 2.8 56 6 FCN-288F6-G/-T 3 32.6 26.2 (29.2) 28.2 28.8 48 Page 4 of 5
ata Sheet FCN-28 series Recommended soldering conditions (reference) Peak temperature max.26degc Natural air cooling or 4decC/sec. or less 22degC Temperature rise max.4degc Temperature rise max.4degc Max.16sec. Pre heat 16 to 18degC max.1sec. 255 to 26decC max.4sec (min.22degc) Metal mask of thickness of solder paste shall be 15micro-meters. If you use soldering bit, please finish soldering within 3sec. at 35 C. Contact Japan FUJITSU COMPONENT LIMITE Shinagawa Seaside Park Tower 12-4, Higashi-shinagawa 4-chome, Tokyo 14 2, Japan Tel: (81-3) 345-1681 Fax: (81-3) 3474-2385 Email: fcl-contact@cs.jp.fujitsu.com Web: www.fujitsu.com/jp/group/fcl/en/ North and South America FUJITSU COMPONENTS AMERICA, INC. 229 North First Street, Suite 212 San Jose, CA 95131 U.S.A. Tel: (1-48) 745-49 Fax: (1-48) 745-497 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/ Europe FUJITSU COMPONENTS EUROPE B.V. iamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 55691 Fax: (31-23) 55695 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/ Asia Pacific FUJITSU COMPONENTS ASIA, Ltd. 12E Pasir Panjang Road #1-1 Citilink Warehouse Complex, Singapore 118529 Tel: (65) 6375-856 / Fax: (65) 6273-321 China FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LT. Unit 436, InterContinental Center 1 Yu Tong Road, Shanghai 27, China Tel: (86 21) 3253 998 /Fax: (86 21) 3253 997 Hong Kong FUJITSU COMPONENTS HONG KONG Co., Ltd. Room 6, 28/F, Greenfield Tower, Concordia Plaza, No.1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong Tel: (852) 2881 8495 Fax: (852) 2894 9512 Korea FUJITSU COMPONENTS KOREA, LT. Alpha Tower #43, 645 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13524 Korea Tel: (82 31) 78-718 Fax: (82 31) 79-718 www.fujitsu.com/sg/products/ devices/ Copyright All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Copyright 218 Fujitsu Components America, Inc. All rights reserved. Revised January 9, 218. Page 5 of 5