3RV1 Circuit-Breakers

SIRIUS 3R Description Mountable accessories 3RV1 Circuit- Breakers Circuit-breaker S00 with mountable accessories 3 2 1 5.1 NSK-7715a 4 Circuit-breaker S0 with mountable accessories 1 7 3 5.2 2 6 NSK-7716a 4 Mountable accessories for size Mountable accessories for size Mountable accessories for size a Transverse auxiliary switch S00 to S3 5.1 Undervoltage release with S00 h Signalling switch S0, S2, S3 leading auxiliary contacts s Lateral auxiliary switch S00 to S3 d Shunt release S00 to S3 5.2 Undervoltage release with S0 to S3 j Isolator module S0 and S2 leading auxiliary contacts f Undervoltage release S00 to S3 2/26 Siemens NS K 2000

SIRIUS 3R Description Remote-controlled motorized operating mechanism 3RV1 circuit-breakers are manually operated switching devices. They automatically trip in case of an overload or short circuit. Intentional, remote-controlled tripping is possible by means of a shunt release or an undervoltage release. Reclosing is only possible directly at the circuit-breaker. The remote-controlled motorized operating mechanism allows the circuit-breakers to be opened and closed by electrical commands. This enables a load or an installation to be isolated from the power system or reconnected to it from an operator panel. The remote-controlled motorized operating mechanism is available for circuit-breakers of sizes S2 (I nmax. = 50 A) and size S3 (I nmax. = 100 A) that are designed for control voltages of AC 230 V or DC 24 V. The circuit-breaker is fitted into the remote-controlled motorized operating mechanism as shown in the block diagram. The circuit-breaker in the remote-controlled motorized operating mechanism can still be switched locally in the "MAN- UAL" position. In the "AUTO- MATIC" position, the circuitbreaker is switched by means of electrical commands. The switching commands must be at least 100 ms long. The remotecontrolled motorized operating mechanism closes the circuitbreaker after 1 second at the latest. In the event of a power failure during the switching operation, the circuit-breaker is guaranteed to remain in the ON or OFF position. Siemens NS K 2000 2/27

SIRIUS 3R Description Mounting accessories Door-coupling rotary operating mechanisms Circuit-breakers with a rotary operating mechanism can be mounted in a cubicle and operated externally by means of a door-coupling rotary operating mechanism. When the cubicle door is closed, the operating mechanism is coupled. The coupling locks when the circuit-breaker is closed. Inadvertent opening of the door is prevented. This lock can be defeated by the maintenance staff. In the OFF position, the rotary operating mechanism can be prevented from reclosing by means of up to three padlocks. Once again, inadvertent opening of the door is impossible. Enclosures Moulded-plastic enclosures with various dimensions for wall or flush mounting are available for installing individual circuitbreakers of sizes S00(I nmax. = 12 A) S0(I nmax. = 25 A) S2(I nmax. = 50 A) The enclosures for wall mounting are designed for degree of protection IP 55, and the enclosures for flush mounting also fulfil degree of protection IP 55 on the front (the flush-mounted section complies with IP 20). All enclosures are equipped with N and PE terminals. Two knockout cable entries for cable glands are provided at both the top and bottom, and further suitable entries are also premoulded on the rear. There is a knockout for indicator lights, which are available as accessories, on top of the enclosure. A circuit-breaker without accessories, equipped with one transverse and one lateral auxiliary contact, can be fitted into the narrow enclosures. In the wide enclosures and in the enclosure for S2 circuit-breakers there is also sufficient space for a laterally mounted auxiliary release. Circuit-breakers with a signalling switch cannot be installed in the enclosures. S00 circuit-breaker in enclosure with EMERGENCY STOP mushroom button With S00 circuit-breakers, the switch rocker is operated via the actuator diaphragm of the enclosure. A locking device, capable of holding up to three padlocks, can be fitted onto the actuator diaphragm. These padlocks prevent the circuitbreaker from closing during maintenance work, for example. A mushroom-shaped EMER- GENCY STOP handle can be fitted in place of the locking device. If it is actuated abruptly, the circuit-breaker opens and the mushroom-shaped handle latches. The handle can be unlatched again either by turning it or by using a special key. The circuit-breaker can then be reclosed. The moulded-plastic enclosures of S0 and S2 circuit-breakers with a rotary operating mechanism are also fitted with a rotary operating mechanism. S2 circuit-breaker with attached isolator module and padlock The enclosures are available with black rotary operating mechanisms or with EMER- GENCY STOP rotary operating mechanisms with a red/yellow handle. All rotary operating mechanisms can be locked in the OFF position with up to three padlocks. Front plates Circuit-breakers are frequently required to be actuated in any enclosure. Front plates that include an actuator diaphragm for size S00 circuit-breakers or a rotary operating mechanism for size S0 to S3 circuit-breakers are available for this purpose. The front plates for size S00 are are equipped with a retaining frame, into which the circuitbreakers can be snapped. For the front plates for sizes S0 to S3, a retaining frame for size S0 circuit-breakers is available. 2/28 Siemens NS K 2000

SIRIUS 3R Description Mountable accessories Busbar adapters The circuit-breakers are mounted directly with the aid of busbar adapters on busbar systems with 40 mm and 60 mm centre-line spacing, in order to save space and to permit infeed times and costs to be cut. Busbar adapters for busbar systems with 40 mm centre-line spacing are suitable for copper busbars with a width of 12 to15 mm, while those with 60 mm centre-line spacing are suitable for widths of 12 to 30 mm. The busbars can be 4 to 5 mm or 10 mm thick. The circuit-breakers are snapped onto the adapter and connected on the line side. This prepared unit is then plugged directly onto the busbar system, and is thus connected both mechanically and electrically at the same time. Refer to page 2/10 for busbar adapters for individual circuitbreakers and accessories. Other busbar adapters for snap-mounting direct-on-line starters and reversing starters, as well as additional accessories such as line terminals and outgoing terminals, busbar copper, etc., can be found in Part 13. Insulated 3-phasebusbar systems 3-phase busbar systems provide a simple, time-saving and straightforward means of feeding a series of adjacent 3RV1 S00, S0 and S2 circuit-breakers which are snap-mounted on a standard mounting rail. The busbars are suitable for between 2 and 5 circuit-breakers. Any kind of extension is possible however by clamping the tags of an additional busbar (rotated 180 ) underneath the terminals of the last circuitbreaker. Different sized circuit-breakers cannot be clamped together due to the different fixing dimensions. Special connectors are available for connecting 3- phase busbars for S0 circuitbreakers to busbars for S00 circuit-breakers. Busbars with larger modular spacings can be used for circuit-breakers with laterally mounted accessories. The circuit-breakers are supplied via appropriate line-side terminals. 3-phase busbar systems are safe against finger touch. They are designed for short circuits of the kind that can occur on the load side of the connected circuit-breakers. SIRIUS circuit-breaker and load feeders with busbar adapters snapped onto busbars Solder pin connections Solder pin connections are available for the main contacts and for the transverse auxiliary switch of S00 circuit-breakers. The prepared connecting parts are clamped into the upper and lower screw terminals of the circuit-breakers, allowing the latter to be soldered to a printed-circuit board. Plug-in socket A plug-in socket is available for S3 circuit-breakers (I nmax. = 100 A). In addition to the plug-in socket, the installation kit also contains 6 plug-in contacts, which are necessary to convert the fixed-mounted circuitbreaker to a plug-in circuitbreaker. A specially adapted circuit-breaker should be used in conjunction with the plug-in socket (see page 2/10). Due to the risk of arcing, a closed circuit-breaker must never be pulled out of the plugin socket or plugged into it. A tripping pin on the circuitbreaker is therefore activated if an attempt is made to do so. This tripping pin only allows the circuit-breaker to be closed when it is plugged in and trips the breaker if an attempt is made to remove it. Rear connection Circuit-breakers are usually connected on the front. It is often preferable to connect the circuit-breaker on the rear however, for example in the case of large circuit-breakers and conductor cross-sections or if a busbar is connected. A "rear main conductor connection" kit be supplied for S3 circuit-breakers, to enable this alternative to be offered for SIRIUS 3R circuitbreakers as well. Siemens NS K 2000 2/29

SIRIUS 3R Circuit diagrams Internal connections Circuit-breakers Circuit-breaker Circuit-breaker 3RV10.. 3RV14.. 3RV16.. 3RV11.. 3RV13.. Shunt release Undervoltage release Undervoltage releases with leading auxiliary contacts 3RV19 02-1D 3RV19 02-1A 3RV19 12-1C 3RV19 22-1C Transverse auxiliary switches (optionally mountable) Lateral auxiliary switches (optionally mountable) Signalling switch (can also be mounted together with auxiliary switches) 3RV19 01-1D 3RV19 01-1E 3RV19 01-1A 3RV19 01-1B 3RV19 01-1C 3RV19 21-1M (sizes S0 to S3) 57 65 77 85 v 58 66 78 86 NSK-7639d External connections Shunt release Undervoltage release L1(L+) F1 S0 Q1 N(L2,L-) 12 14(14) S 11(13) C1 F3 F2 C2 NSK-7640b S0; S1; S2 Q1 S F1; F2 F3 F4 OFF pushbuttons in system Circuit-breaker Auxiliary switch of circuit-breaker Q1 (transverse or lateral) Fuses (gl/gg) max. 10 A Shunt release Undervoltage release 2/30 Siemens NS K 2000

SIRIUS 3R Typical circuits 3RV1 circuit-breaker with 3RV19 21-1M signalling switch H1: "Short circuit" signal H1; H2 Indicator lights H2: "Overload" or "Tripped by auxiliary release" signal F1; F2 Q1 S1 Fuses (gl/gg) max. 10 A Circuit-breaker Signalling switch Separate "Tripped" and "Short circuit" signals Circuit-breakers tripped by means of pushbutton or EMERGENCY STOP button in the system The undervoltage release with leading auxiliary contacts prevents the formation of vagabond voltages in the control circuit in the "OFF" position. In the "tripped" position of the breaker, these contacts are not guaranteed to open. F1; F2 Q1 F4 S1; S2, S3 Fuses (gl/gg) max. 10 A Circuit-breaker Undervoltage release OFF pushbuttons in system 3RV1 circuit-breaker with 3RV19 36/3RV19 46 remote-controlled motorized operating mechanism Circuit-breaker with relay function S1 S2 K1 F1; F2 Q1 OFF pushbutton ON pushbutton Latching contact Fuses gl/gg 6 A Circuit-breaker Siemens NS K 2000 2/31

SIRIUS 3R Size S00 Size S0 3RV10 11 circuit-breaker 3RV10 21 circuit-breaker Size S2 3RV10 31 circuit-breaker 1) Lateral auxiliary switch 2) Signalling switch 3) Auxiliary release 4) Transverse auxiliary switch 5) Push-in lugs for screw mounting 6) Only for undervoltage release with leading auxiliary switch 7) Arcing space 8) 35 mm standard mounting rail acc. to EN 50 023 9) Mounting on 35 mm standard mounting rail, 15 mm high, acc. to EN 50 022 or on 75 mm standard mounting rail acc. to EN 50 023 10) 4 mm hexagon socket screw 11) Lockable in 0 position with shackle diameter 5 mm Size S3 3RV10 41 circuit-breaker Height of arcing spaces a in mm Size Arcing spaces for limiter function in mm (see also page 2/18) U e [V] S00 S0 S2 S3 U e [V] S0 S2 S3 a a a a 240 20 30 50 50 500 left/right 10 10 10 400 20 30 50 70 top/bottom 40 50 110 440 20 30 50 70 690 left/right 30 10 30 500 20 30 50 110 top/bottom 50 50 150 690 20 50 50 150 Size 2/32 Siemens NS K 2000

SIRIUS 3R Size S0 3RV11 21 circuit-breaker Size S2 3RV11 31 circuit-breaker a) Clearance from earthed parts 3) Auxiliary release 4) Transverse auxiliary switch 5) Push-in lugs for screw mounting 8) 35 mm standard mounting rail acc. to EN 50 023 9) Mounting on 35 mm standard mounting rail, 15 mm high, acc. to EN 50 022 or on 75 mm standard mounting rail acc. to EN 50 023 10) 4 mm hexagon socket screw 11) Locking device Size S3 3RV11 42 circuit-breaker Siemens NS K 2000 2/33

SIRIUS 3R Isolator module for circuit-breaker size S0 3RV19 28-1A Isolator module for circuit-breaker size S2 3RV19 38-1A Moulded-plastic enclosure for wall mounting 3RV19 13-1. a) 3RV19 13-1C 85 mm 3RV19 13-1D 105 mm b) Dimension refers to mounting plane 3) Knockout for Pg 16 4) Knockout for cable entry at the rear 5) With safety lock 6) Max. shackle diameter for padlock 8 mm 7) 3RV19 03-5B indicator light 8) 3RV19 13-6B locking device 9) 3RV19 13-7. EMERGENCY STOP mushroom button Moulded-plastic enclosure for wall mounting for circuit-breaker size S0 3RV19 23-1. 45 45 1) 2) 4,5 Moulded-plastic enclosure for wall mounting for circuit-breaker size S2 3RV19 33-1G 56 1) 2) 7 25 3RV19 03-5B indicator light 3) 155 145 250 235 a) NSK-8197 126 18 150 181 NSK-8198 18 a) 3RV19 23-1C 85 mm 3RV19 23-1D 105 mm 1) Knockout for Pg 16 2) Knockout for cable entry at the rear 3) Knockout for padlock with max. shackle diameter 8 mm 1) Knockout for Pg 21 2) Knockout for cable entry at the rear 2/34 Siemens NS K 2000

SIRIUS 3R Moulded-plastic enclosure for flush mounting 3RV19 13-2D Moulded-plastic front plate 3RV19 13-4B/-4C max. 7 12 ø 7 40 4,5 R3 87,5 175 155 35 157 107 35 95 53 53 105 95 12 87 NSK-8520 45 85 36 56,5 10 39 62 70 36 NSK-8521 Moulded-plastic enclosures for flush mounting 3RV19 23-2D/-2G Solder pin connections for main and auxiliary contacts 3RV19 18-5A 3RV19 18-5B max. 6 175 87,5 155 35 157 R3 NSK-8522 105 95 12 87 Moulded-plastic front plates and holder 3RV19 23-4B 3RV19 23-4G 12 18 ø 3,5 40 7,4 45 36 37,5 36 107 35 92 53 53 85 56,5 10 NSK-8523 62 70 Siemens NS K 2000 2/35

SIRIUS 3R Door-coupling rotary operating mechanism for circuit-breaker sizes S0, S2, S3 3RV19 26-0 12) 13) 14) 15) Lockable in 0 position, max. shackle diameter 8 mm Fixing with screw cap As-delivered condition, adapt if necessary by shortening shaft; minimum length 45 mm Terminal block Remote-controlled motorized operating mechanism for circuit-breaker 3RV19. 6-3AP0 Busbar adapter for 40 mm busbar systems 8US10. 1-5DJ07 a) 3RV19 36-3AP0 211 mm 3RV19 46-3AP0 236 mm 4) For busbars width: 12 to 15 mm thickness: 5 and 10 mm a Busbar adapter for 40 mm busbar systems 8US10 61-5FK08 s Lateral module 8US19 98-2KB00 Busbar adapter for circuit-breaker size S3 for 40 mm and 60 mm busbar systems 8US11 11-4SM00 23 23 14 60 42 182 40 40 60 116 70 NSK-7820 44 137 162 174 2/36 Siemens NS K 2000

SIRIUS 3R Busbar holder for 40 mm busbar systems 3VX4 280-2R Moulded-plastic cover for line-side terminals for 40 mm busbar systems 3VX4 280-2S 4) For busbars width: 12 to 15 mm thickness: 5 and 10 mm 1) Busbar adapter for 60 mm busbar systems 8US12 51-5DM07 2) Lateral module for 60 mm busbar systems 8US19 98-2BM00 3) For busbar width: 12 to 30 mm thickness: 5 and 10 mm a Busbar adapter for 60 mm busbar systems 8US12 61-5FM08 s Lateral module 8US19 98-2BM00 Busbar adapter for 60 mm busbar systems 8US19 23-2AA00 60 60 32 60 NSK-8189 3) For busbars width: 12 to 30 mm thickness: 5 and 10 mm 3-phase busbars 3RV19 15-1. for 2 circuit-breakers (length 90 mm): 3RV19 15-1A for 3 circuit-breakers (length 136 mm): 3RV19 15-1B for 4 circuit-breakers (length 181 mm): 3RV19 15-1C for 5 circuit-breakers (length 226 mm): 3RV19 15-1D 3-phase busbars for 2 circuit-breakers with accessories (length 109 mm) 3RV19 15-3A for 4 circuit-breakers with accessories (length 235 mm) 3RV19 15-3C Siemens NS K 2000 2/37

SIRIUS 3R 3-phase busbars for circuit-breaker size S2 3RV19 35-1. for 2 circuit-breakers (length 111 mm) 3RV19 35-1A for 3 circuit-breakers (length 166 mm) 3RV19 35-1B for 4 circuit-breakers (length 221 mm) 3RV19 35-1C 3-phase busbars for circuit-breaker size S2 3RV19 35-3. for 2 circuit-breakers with accessories (length 121 mm) 3RV19 35-3A for 3 circuit-breakers with accessories (length 196 mm) 3RV19 35-3B for 4 circuit-breakers with accessories (length 271 mm) 3RV19 35-3C 3-phase line-side terminal connection from above 3RV19 15-5A 3-phase line-side terminal connection from below 3RV19 15-5B 3-phase line-side terminal for circuit-breaker size S2 3RV19 35-5A 55 17 17 65 57 Connector for circuit-breaker size S0 to size S00 3RV19 15-5D 15 34 NSK-8157 2/38 Siemens NS K 2000

SIRIUS 3R Plug-in socket with busbar connection on rear for circuit-breaker size S3 Rear main conductor connection for circuit-breaker size S3 Plug-in socket with upper and lower terminal connections for circuit-breaker size S3 Siemens NS K 2000 2/39