/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up to SIL 4 (IEC 6508) Optional add-on manual override or inductive limit switches on request Valve switches at power failure into starting position (mechanical spring return) Suited for outdoor use under critical environment conditions (see solenoid list) These solenoid valves are applicable in Ex protection class ATEX (categories II GD and II GD) and other international approvals DIN EN 6508 IEC 6508 up to SIL 4 Approval depends on magnetic system, see page! Technical features Medium: Compressed air, filtered, non-lubricated and dry Operation: Direct solenoid operated poppet valves Mounting position: Any, but preferably with solenoid vertical Technical data Orifice: 8 mm Port size: G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Operating pressure: 0... 0 bar (0... 45 psi) Flow: /4: 900 l/min; /: 000 l/min ( bar pressure differential) Flow direction: Optional Fluid/Ambient temperature: -40... +60 C (-40... +40 F) Depending on solenoid system Air supply must be dry enough to avoid ice formation at temperatures below + C (+5 F). For outdoor installation please protect all connections against the penetration of moisture! Materials: Housing: stainless steel.4404 (6L), brass.040, aluminium anodized.065 Seal: SNR (special perbunan) Inner parts: stainless steel, brass Symbol Port size, () Operating pressure (bar) Materials Manual override*) Test certificate IEC 6 508 *) Weight (kg) Dimension No. Model *) G /4, G/ NAMUR, G/4 0... 0 Aluminium Without x 0,7 980505 /4 NPT, / NPT NAMUR, /4 NPT 0... 0 Aluminium Without - 0,7 98055 G /4 G /4 0... 0 Stainless steel Without - 0,9 98075 /4 NPT /4 NPT 0... 0 Stainless steel Without - 0,9 980745 G / G / 0... 0 Stainless steel Without x 0,9 980755 / NPT /-NPT 0... 0 Stainless steel Without - 0,9 980765 G / G / 0... 0 rass Without x 0,9 980655 / NPT /-NPT 0... 0 rass Without - 0,9 980665 *) When ordering please indicate solenoid, voltage and current Modele (frequency). *) Add-on manual override see page *) IEC 6 508 Temperature range -5... +70 C Option selector 980 5... Materials Substitute Aluminium 5 rass 6 Stainless steel 7 Port size Substitute NAMUR, G/4 0 NAMUR, /4 NPT G /4 /4 NPT 4 G/ 5 / NPT 6 Voltage Substitute 4 V d.c. 04.00 0 V a.c. 0.50 Solenoids Substitute See table above / N/en/en 5.4.69.0
Solenoid operators Power consumption 4 V d.c. 0 V a.c. (W) (VA) Rated current 4 V d.c. 0 V a.c. (m A) (m A) Ex- Protection (ATEX- Category) Protection class *7) Temperature Ambient/ Fluid ( C) Electrical connection Weight (kg) Dimension No. Circuit diagram No. Model 6,9-70 - - IP 65 (with connector) *5) -5... +60 Fluid: max. 80-7, - 75 - IP 65 (with connector) *5) -5... +60 Fluid: max. 80 8,9-69 - IP65-0...+90 Fluid: 0-0,0-4 IP65-0...+90 Fluid: 0 8,9 69 - IP67-0...+90 Fluid: 0-0,0-4 IP67-0...+90 Fluid: 0 Connector DIN EN 750-80 Form A *6) Connector DIN EN 750-80 Form A *6) Terminals, cable gland Pg,5 Terminals, cable gland Pg,5 m cable, encapsulated in EP resin m cable, encapsulated in EP resin 0,6 0800 0,5 4 6 80 0,5 9 40 0,5 9 6 4 0,7 9 4 0,7 9 6 4 8,9-69 - IIG IID Ex e mb IIC T4/T5 Gb Ex tb IIIC T 0 C Db IP66 *), *0) -40... +65 T4-40... +55 T5-40... +65 M0 x,5 *6) 0,5 6 4 470 *8) - 0,0-4 IIG IID Ex e mb IIC T4/T5 Gb Ex tb IIIC T 0 C Db IP66 *), *0) -40... +65 T4-40... +55 T5-40... +65 M0 x,5 *6) 0,5 6 7 47 *8) 8,9 69 IIG IID Ex d mb IIC T4/T6 Gb Ex e mb IIC T4/T6 Gb Ex tb IIIC T0 C Db *) *0) -40... +70 T4-40... +70 / - 4 NPT *6) 0,8 7 0 4670 *8) 0,0 4 IIG IID Ex d mb IIC T4/T6 Gb Ex e mb IIC T4/T6 Gb Ex tb IIIC T0 C Db *) *0) -40... +70 T4-40... +70 / - 4 NPT *6) 0,8 7 467 *8) 8,9 69 IIG IID Ex d mb IIC T4/T6 Gb Ex e mb IIC T4/T6 Gb Ex tb IIIC T0 C Db *) *0) -40... +70 T4-40... +70 M0 x,5 *6) 0,8 7 0 467 *8) 0,0 4 IIG IID Ex d mb IIC T4/T6 Gb Ex e mb IIC T4/T6 Gb Ex tb IIIC T0 C Db *) *0) -40... +70 T4-40... +70 M0 x,5 *6) 0,8 7 467 *8) Stainless steel 8,9 69 IIG IID Ex mb d IIC T4/T6 Ex mb e II T4/T6 Ex mbd td A IP66 T00 C Ex td A IP66 T00 C *) *0) -40... +50 T4-40... +50 M0x,5 *6), 0 4 487 *8), *) 0 4 IIG IID Ex mb d IIC T4/T6 Ex mb e II T4/T6 Ex mbd td A IP66 T00 C Ex td A IP66 T00 C *) *0) -40... +50 T4-40... +50 M0x,5 *6), 0 7 487 *8), *),6-567 - - XP/DIP, Div. & CI. I, Gr. A-D CI. II/III, Gr. E-G T (60 C) *4) NEMA 4, 4X, 6, 6P, 7, 9 *4) -0... +60 Flying leads 450 mm long 0,5 8 86-5,7-68 - XP/DIP, Div. & CI. I, Gr. A-D CI. II/III, Gr. E-G T (60 C) *4) NEMA 4, 4X, 6, 6P, 7, 9 *4) -0... +60 Flying leads 450 mm long 0,5 8 5 87 Standard voltages 4 V d.c., 0 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/5008. 00% duty cycle. *) EG-Type-Examination-Certificate KEMA 0 ATEX 47 X *) EG-Type-Examination-Certificate KEMA 98 ATEX 445 X *) EG-Type-Examination-Certificate PT 0 ATEX 085 X *4) CSA-LR 5764-6, FM Approval *5) Required connector: type 057075 *6) Connector cable gland not supplied, see table»accessories«*7) IP-Protection class according to EN6059 *8) Suitable for outdoor installation *0) IEC Ex Certificate of Conformity *) EG-Type-Examination-Certificate PT 06 ATEX 054 X Attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex dmb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex emb. N/en/en 5.4.69.0 /
Accessories Cable gland Protection class Ex e, Ex d (ATEX), Nickel plated brass/stainless steel Thread Cable Ø Material Protection class (ATEX) Model M 0x,5 5,0...8,0 mm Nickel plated brass IIGD Ex e 05888 M 0x,5 0...4 mm Nickel plated brass IIGD Ex d 058885 /-4-NPT 7,5...,9 mm Nickel plated brass IIGD Ex d, Ex e 058895 M 0x,5 9,0... mm Stainless steel.457 IIGD Ex e 058985 M 0x,5 7,0... mm Stainless steel.4404 IIGD Ex d 058995 M 0x,5 0...4 mm Stainless steel.4404 IIGD Ex d 058987 Connector Silencer *) Exhaust guard *) Add-on manual override /manual reset *) Without detent with detent Page 8 Page 8 057075 C/S (/4 NPT) 064 (G/4, /4NPT) 060005 060765 M/S (G /4) C/S4 (/ NPT) 064 (G/, /NPT) M/S4 (G /) *) For indoors use *) For outdoors use *) Manual override Solenoid not energized with button actuation valve is connected and reset by spring. (For testing only prior to commissioning) Manual reset Solenoid energized. When button operation valve is switched and remains switched to magnetic current. Page 4 Throttle control plate Flange plate Yoke Page 6 Page 6 Page 6 40409 (for G/4 only) 06790 (NAMUR single connection plate, for G/4 only) 054059 0679 (NAMUR-rip use in combination with 06790, Alu) / N/en/en 5.4.69.0
Dimensions Valves G/4 G/ 47 7 ca. 5 4 9,6 (6.5) G/4 M5 7.5 50 4,5 4 60 5 7,5 4 5,5 46 9,5 0 48,5 5 6 7 60 4,5 7 ~ 6 4 Solenoid optional turnable, for dimensions see page 5 Working port G / or / NPT 4 Add on manual override, see below Add-on manual override Without detent Model: 060005 With detent Model: 060765 4,5 8,5 9,5 9 ø 6 Please note: add-on manual override for NAMUR valves provided only for commissioning and tests N/en/en 5.4.69.04 /
Dimensions Solenoids 5,5 49 86,5 4 6,5 59 96,5 4 4 40,5 7 4 M6 x,5 8 4 4 40,5 48 M6 X,5 8 7 7 6 07 7 70,5 9,5 64,5 7 40,5 4,5 8 9 / - 4 NPT 40,5 84 6 4,5 54,5 0 5 M 0 x,5 4 59 56 9 4 5 6 8,5 4 6 4 0,5 0 Connector can be indexed by 4x90 Ø 6 or (with spacer tube) M0 x,5 or / - 4 NPT 4 Flying leads AWG 8 (450 mm long) 5 With cable gland, Pg,5 / N/en/en 5.4.69.05
0 68 4 45 4 5 56 8 5 Ø 6 or (with spacer tube) M0 x,5 Circuit diagrams 4 5 6 7 0 N/en/en 5.4.69.06 /
NAMUR hole pattern (driving side) M5 4 Port (A) Coding stud threaded 4 M5 (0 deep) 5 Port (R) 4 NAMUR quick exhaust module for a better kv-value by exhaust see data sheet 5.4.80 5 NAMUR interlinking plates in redundancy design for»safety exhausting«and»safety ventilating«see data sheet 5.4.80 Single connection plate Model: 06790 NAMUR slot Model: 0679 5,5 M 5 (4x) 6 5,5 4,5 6 4,5 04 ø 9,5 0 0 G /4 5 5 9,5 5,5 4 5,5 ø 5,5 G /4 5 9 60 ø 9 ø 4,5 7 Yoke Model: 054059 65 x Throttle control plate Model: 40409,5 5,5 45 50 4 M 5 5 0 76 4 7,5 5 8 M 5 5,5 5,5 A A / N/en/en 5.4.69.07
Silencer Model: M/S, M/S4, C/S, C/S4 Exhaust guard Model: 064, 06 C G C G ø D ø D G C Ø D Weight (g) Model G/4 7 5,5 5,5,9 M/S /4 NPT 7 5,5 5,5,9 C/S G/ 67,5 M/S4 / NPT 67,5 C/S4 Suitable for G C Ø D Weight (g) Model /4 G/4, /4 NPT 0 6,5 5 064 / G/, / NPT,5 9 064 Cable gland C A D C A D A C ø D Model M0 x,5 9 6 5... 8 05888 M0 x,5 6,5 7,5 9... 058985 M0 x,5 4 9 0... 4 4 058885 /-4 NPT 5 58 7,5...,9 4 058895 M0 x,5 4 9 7... 4 058995 M0 x,5 0 4 0... 4 4 058987 058895 only Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in pneumatic systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. Functional safety (SIL): Suitable for certain applications can only be evaluated through examination of each safety-related overall system with regard to the requirements of IEC 6508/65. N/en/en 5.4.69.08 /