CABINETS & ENCLOSURES FOR PREPAYMENT METERS Solutions designed according to customer need, conceived for every type of prepayment meter: > Meters with keypad data entry terminal > Split meters with remote keyboard > Magnetic token slot meters A range of cabinets & enclosures allowing protection of one or various prepayment meters, single or three phases, and possibility for housing as well cut outs or circuit breakers protective devices. Cabinets made of insulating synthetic materials (recyclable thermoplastics or glassfiber reinforced polyester), self extinguishing, UV resistant, designed to be used indoor as well as outdoor, and in harsh environments. Compliance with International Electrotechnical Commission Standards. SEIFEL 8, Rue Claude Chapel - CS 51865 35418 Saint-Malo CEDEX France Phone: +33 2 99 21 52 08 Fax: +33 2 99 81 95 13 E-mail: export@seifel.fr http://www.seifel.eu/en/
METER WITH KEYPAD OR SPLIT BS FIXING METER EXTRA SMALL CABINET XS CABINET Adapted to the smallest meters to reset circuit breaker, etc. Hook on door, with security locking system, Overall dimensions: H 301 x W 214 x D 98 mm EXTRA-FLAT CABINET ER-0 CABINET Adapted to the smallest meters to reset circuit breaker, etc. Hook on door, with security locking system, Overall dimensions: H 371 x W 250 x D 108 mm. BIG DEPTH CABINET AR-0 CABINET Polyvalent use: either for a prepayment meter, or for conventional electromechanical meter keypad of meters or to the slot for entry of the magnetic card, to reset circuit breaker, etc. Hook on door, with security locking system, Overall dimensions: H 371 x W 250 x D 163 mm. 2
METER WITH KEYPAD OR SPLIT BS FIXING METER CABINET FOR SINGLE PHASE METER + CUT OUTS + CIRCUIT BREAKER VERTIBOX Protection of a single phase prepayment meter, of cut-outs and circuit breaker to reset circuit breaker, etc. Hook on door, with security locking system, Overall dimensions: H 513 x W 201 x D 108 mm. CABINET FOR THREE PHASE METER + CUT OUTS + CIRCUIT BREAKER S20 CABINET Protection of a three phase prepayment meter, of cut-outs and circuit breaker to reset circuit breaker, etc. Door on hinges, with security locking system, Overall dimensions: H 485 x W 350 x D 195 mm. MULTI METER BOLLARD FOR SINGLE OR THREE PHASE METERS + ACCESSORIES BIG VOLUME BOLLARD Multiple configurations on demand, Can house meters, distribution and as required, circuit breakers, circuit breakers, terminal blocks, antenna, etc. Pavement installation, against a wall, or half flush Removable door, with security locking, Overall dimensions: H 692 x W 530 x D 200 mm. 3
METER WITH KEYPAD OR SPLIT BS FIXING METER CABINET FOR MULTI-METERING AR-3 CABINET For 3 to 8 meters Can include distribution (connectors: incoming 95 sqmm / outgoings 35 sqmm) May also house cut outs, circuit breakers, customer supply cable connection to reset circuit breaker, etc., Indoor or outdoor installation, against a wall, or flush, Door on hinges, with security locking system, Overall dimensions: H 523 x W 700 x D 215 mm. ENCLOSURES FOR MULTI-METERINGENCLOSURES Customer connection unit ENCLOSURES FOR MULTI METERING Meters fixed on boards or protected in a closed cabinet For collective flat and commercial buildings Multiple configurations, single or three phase, up to 40 meters Includes distribution (1 entrance for X meters) and can include: > General protection > Cut outs > Circuit breakers > Terminals for connection of the consummer, supply cable > Earthing facility Opaque of transparent covers, locking with security screws keypad of meters or to the slot for entry of the magnetic card, to reset circuit breaker, etc. Indoor installation, against a wall, or flush Overall dimensions change according to the number of meters Meter units Service entrance, Distribution, cut outs unit Meters Protected 4
SPLIT DIN RAIL METERS 1 SPLIT METER CABINET POLE TOP BOX Can house one DIN mount Split meter, one circuit breaker and terminals Indoor or outdoor installation, against a wall, tailor made for pole mounting Clearing of lateral sides while opening the cabinet, for ease of access to equipments Cover on hinged, vertical opening, locaking by a screw, Overall dimensions: H 318 x L 112 x P 124 mm. MULTI METERS CABINETS, WITH OR WITHOUT PROTECTION AR-0 VERTIBOX AR-0 CABINET & VERTIBOX Can house several DIN mount Split meters and cut-outs or CBs Indoor or outdoor installation, against a wall, or pole Hook on door, with security locking system See other accessories (on last page) Overall dimensions: * AR-0: H 371 x W 250 x D 163 mm * VERTIBOX: H 513 x W 201 x D 108 mm AR-1H S20 simple AR-2 S20, AR-1H & AR-2 CABINET Can house several DIN mount Split meters and cut-outs or CBs Indoor or outdoor installation, against a wall, or pole Door on hinges, with security locking system See other accessories (on last page) Overall dimensions: * S20: H H 485 x W 350 x D 195 mm. * AR-1H: H 330 x W 460 x D 186 mm * AR-2: H 523 x W 537 x D 230mm DOUBLE S20 Multiple configurations upon request May house meters, distribution and, according to the need, cutouts, circuit breakers, terminals Installation on walkways, against a wall, or flush Double S20 onto pedestal 5
GENERAL CHARACTERISTICS OF OUR ENCLOSURES Our enclosures and enclosures, as well as their equipment, comply with international standard IEC 62208 Empty enclosures for low voltage switchgear assemblies: Degree of protection (penetration against penetration of water and solid foreign objects) IP43 or higher (according to IEC 60529) Very strong mechanical resistance against shock (IK 09 or higher according to IEC 62262) High resistance to heat, fire and abnormal heat (according to IEC 60695-2-10 and 11 standard - glow wire at 960 C) High dielectric strength Weather resistance, including UV tests Corrosion resistance Enclosure Material IP IK Colour Height Width Depth XS Glassfiber reinforced polyester 43 09 Grey RAL 7035 301 mm 214 mm 98 mm ER-0 Glassfiber reinforced polyester 43 09 Grey RAL 7035 371 mm 249 mm 110 mm AR-0 Glassfiber reinforced polyester 43 09 Grey RAL 7035 371 mm 249 mm 163 mm VERTIBOX Glassfiber reinforced polyester 43 09 Grey RAL 7035 513 mm 201 mm 108 mm AR-1H Glassfiber reinforced polyester 43 09 Grey RAL 7035 330 mm 460 mm 186 mm AR-2 Glassfiber reinforced polyester 43 09 Grey RAL 7035 523 mm 537 mm 230 mm AR-3 Glassfiber reinforced polyester 43 09 Grey RAL 7035 523 mm 700 mm 230 mm Pole Top Box Thermoplastic compound 54 09 Grey RAL 7035 318 mm 112 mm 124 mm S20 Compound thermoplastique ou Glassfiber reinforced polyester 43 10 Cream AFNOR 3225 or Grey RAL 7035 485 mm 350 mm 195 mm S20 double Glassfiber reinforced polyester 43 10 Cream AFNOR 3225 984 mm 700 mm 195 mm Big Volume Bollard Glassfiber reinforced polyester 43 10 Cream AFNOR 3225 692 mm 530 mm 200 mm ERC Glassfiber reinforced polyester (casings) & polycarbonate (covers) N/A 10 Grey RAL 7035 Selon configuration 630 or 760 mm 225 mm ERCP Glassfiber reinforced polyester (casings) & polycarbonate (covers) N/A 10 Grey RAL 7035 Selon configuration 380 or 570 or 630 or 760 mm 225 mm 6
OPTIONS & ACCESSORIES Flaps & windows made in UV resistant transparent polycarbonate Réf. Description Part number MIR Window 93 x 109 mm + screws AC81006 TR MIR Padlockable flap 93 x 109 mm + screws SE35439 FLAPS & READING WINDOW For access to meters or circuit breaker Made of transparent, UV resistant polycarbonate Possibility of padlocking and sealing TR EX Padlockable flap 100 x 140 mm + screws SE35434 TR 140x140 Padlockable flap 140 x 140 mm SE35435 DC MIR Padlocking lug for «TR» flaps SN00260 MIR-C Sealable flap 100 x 140 mm + screws AC98701 MIR-D Sealable flap 105 x 205 mm + screws SE74083 M-560 Big flap for ERCP width 630 mm SN15492/3 M-676 Big flap for ERCP width 760 mm SN15491/1 TR EX TR MIR M-8 TR M-4 TR M-2 Flap for 2 x 18 mm modules SE74096 M-4 Flap for 4 x 18 mm modules SE74095 M-4 «TR» Padlockable flap for 4 x 18 mm modules + screws AC98104 M-8 Flap for 8 x 18 mm modules SE74084 M-8 «TR» Padlockable flap for 8 x 18 mm modules + screws AC98105 M-12 Flap for 12 x 18 mm modules + screws AT74098 Flap for ERCP M2 & M4 CABLE CONES Ref. Ø Min. / Max. Ø drilling Part number 5683 14 mm 17 mm SN15683 INCOMING / OUTGOING OF CABLES Plastic cable entry cones or cable glands, all diameters available 5702 5 / 20 mm 22 mm SN15702 5686 8 / 26 mm 28 mm SN15686 5537 8 / 37 mm 38 mm SN15537 5409 27 / 48,5 mm 50 mm SN15430 5852 64 mm 67 mm SN15852 5853 90 mm 94 mm SN15853 CABLE GLANDS Ref. Ø Min. / Max. Ø drilling Part number PG-9 6 / 8 mm 16 mm AT74087 PG-11 8 / 10 mm 19 mm AT74088 PG-13 10 / 12 mm 21 mm AT74089 PG-16 12 / 14 mm 23 mm AT74090 PG-21 14 / 18 mm 29 mm AT74091 PG-29 18 / 24 mm 38 mm AT74092 PG-36 24 / 30 mm 48 mm AT74093 PG-42 30 / 35 mm 55 mm AT74094 7
Publication June 2017 This document is not contractual the material and information presented in this brochure can be modified without prior notice OPTIONS & ACCESSORIES SECURITY LOCKING Secured head screws (triangular, sealable, shear-head screw) Padlocking devices 3 point locking system (AR-1H, AR-3) Other options on request BACK PLATES For fixing of equipment housed inside the cabinet Made of insulating, self extinguishing material Possibilty of adjustment of the depth, sealing, cover for cut outs,... METER FIXING BRACKETS For XS, ER-0 and AR-0 cabinets Set of 3 brackets to be fixed onto embossings of cabinets Sliding superior bracket Possibilty of adjustment of the depth thanks to set of elevators PRE-WIRING Internal pre-wiring standing by equipment installation, with marking and colour code FIXING ACCESSORIES Wall fixing Pole fixing SEIFEL 8, Rue Claude Chapel - CS 51865 35418 Saint-Malo CEDEX France Phone: +33 2 99 21 52 08 Fax: +33 2 99 81 95 13 E-mail: export@seifel.fr http://www.seifel.eu/en/