is a PC-based Motion Control system. In comparison to the previous version, the performance has been doubled. It is now possible to control machines with more than 40 axes in cycles of 2 ms. The operating system is Windows XP Professional, with a real-time expansion for SIMOTION. This enables PC applications to be carried out alongside SIMOTION machine applications on at any time. Interfaces The industrial PC contains the following interfaces: 1 x IsoPROFIBUS board with two interfaces with PROFIdrive to connect - Distributed I/Os (SIMATIC ET200, standard slaves, etc.) - Servo converters (e.g.,, MASTERDRIVES MC, etc.) - Engineering systems (PG/PC) or - HMI devices (e.g., MP, TP, OP) On-board interfaces for standard Windows applications integrated in the PC: - 1 x MPI/ (not isochronous) - 2 x Industrial Ethernet (e.g. engineering system connection) The open PCI slot can be used to add the following interfaces (optional): The MCI-PN communication board for supports connection to a PROFINET IO network. This means that in terms of PROFINET, is a PROFINET IO controller and supports connection to: - Distributed I/Os (SIMATIC ET200, etc.) - Servo converters (e.g.,, etc.) - Engineering systems (PG/PC) or - HMI devices (e.g., MP, TP, OP). Compatible panel fronts can be connected to the following panel fronts: 12" with 12" for 15" with 15" for The DVI/VGA interface can be used to connect an external monitor. Compatible I/Os : Certified standard slaves (DP-V0, DP-V1, DP-V2) S/M/X/eco/pro distributed I/O systems Distributed drives, e.g. with the CU320 control unit PROFINET IO (via the MCI-PN board, optional) S/pro distributed I/Os distributed drives with CU320 control unit and CBE20 communication board as well as Power Modules with CU310PN Other features Processor: Intel Pentium M 2 GHz 512 MB SDRAM, upgradable to 1 GB Hard disk with shock damping, approx. 40 GB DVD-ROM drive (optional) Microsoft Windows XP Professional operating system, English Data backup/restore using the Symantec Ghost data backup software (preinstalled) Integrated ports: - 1 x COM 1 (V.24), VGA (via DVI adapter) - 4 x USB 2.0-1 x MPI/ interface (integrated, not isochronous, optically isolated) - 2 x Industrial Ethernet 10/100 Mbps (integrated) Expansion slots: - 1 x PCI/ISA 170 mm (free) - 1 x PCI 265 mm (occupied by IsoPROFIBUS board) IsoPROFIBUS board (preinstalled): - 2 x with PROFIdrive PROFINET communication board (optional) 12 Siemens PM 10 N November 2006
Integration SIMOTION P350-3 PCI-Slot X4 X121 X2 Iso PROFIBUS board X102 X101 Ethernet More standard PC interfaces MCI-PN Communication Board PROFIBUS cables see MOTION CONNECT PROFIBUS cables see MOTION CONNECT Ethernet bus cable included in standard keyboard package RS 232 PROFINET cables Overview of the connections e. g. ET 200S Programming device PG drive e. g. e. g. ET 200M drive e. g. e. g. ET 200M PG, HMI Standard PC keyboard Mouse SITOP UPS (optional) G_PM10_EN_00023a Input voltage 24 V DC Power consumption, max. 190 W Mains buffering max. 20 ms Degree of protection EN 60529 IP20 (IEC 60529) Temperature change, max. 10 K/h Rel. humidity limit values to IEC 68-2-3, IEC 68-2-30, IEC 68-2-56 Storage and transport 5% to 95% at +25 C (+ 77 F) 5% to 80% at +25 C (+ 77 F) Humidity rating in accordance with Class 3K5 EN 60721-3-3 Condensation and icing excluded Low air temperature 0 C (32 F) (-4 F to + 140 F) +5 C to +45 C (+41 F to +113 F) Weight, approx. 6 kg (13 Ib) Dimensions (W x H x D) 297 mm x 267 mm x 85 mm (11.69 in x 10.51 in x 3.35 in) (excluding DVD drive) 297 mm x 267 mm x 106 mm (11.69 in x 10.51 in x 4.17 in) (including DVD drive) With Intel Pentium M, 2 GHz/ with Windows XP Professional 4.0 English, 512 MB SDRAM, 24 V DC, IsoPROFIBUS board without DVD drive J 6AU1350-3AK41-1BE2 with DVD drive J 6AU1350-3AK43-1BE2 Memory expansion 128 MB DDR2 533 SODIMM A 6ES7648-2AG10-0GA0 256 MB DDR2 533 SODIMM A 6ES7648-2AG20-0GA0 512 MB DDR2 533 SODIMM A 6ES7648-2AG30-0GA0 MCI PN communication board A 6AU1390-0BA00-0AA0 Replacement parts Motherboard battery 6FC5247-0AA18-0AA0 Runtime and engineering software See "SIMOTION software" The Software option must be ordered via z-option A) Subject to export regulations: AL: N and ECCN: EAR99H J) Subject to export regulations: AL: N and ECCN: 5D992B2 Siemens PM 10 N November 2006 13
Panels Four different panel fronts with TFT color display are available for the : 12 with membrane keyboard, resolution: 800 x 600 pixels 12 for, resolution: 800 x 600 pixels 15 with membrane keyboard, resolution: 1024 x 768 pixels 15 for, resolution: 1024 x 768 pixels Panels Degree of protection in accordance with DIN EN 60529 (IEC 60529) Front panel IP65 Rel. humidity limit values in accordance with DIN IEC 68-2-3, DIN IEC 68-2-30, DIN IEC 68-2-56 Storage and transport 5% to 95% at +25 C (+77 F) 5% to 80% at +25 C (+77 F) Condensation Not permitted (-4 F to +140 F) +5 C to +45 C (+41 F to +113 F) Weight Dimensions (W x H x D) The panel fronts are suitable for installation in consoles, control cabinets and support arm systems. The is mounted directly behind the panel front as standard. Four knurled-head screws are used to form a mechanical interlock between the and the panel front. No special tool is needed for this. The panel fronts below can only be used in conjunction with It is also possible to distribute the SIMOTION panel fronts at. distances of up to 100 m. For the required components, refer to. SIMOTION P012T 12" Touch panel front SIMOTION P012K 12" Keys panel front SIMOTION P015T 15" Touch panel front SIMOTION P015K 15" Keys panel front Caps 10 units for USB terminal Key labeling strips For labeling soft keys and function keys, blank, 3 per set (plastic) for 12 Keys 15 Keys 483 mm x 310 mm x 100 mm (19.02 in x 12.21 in x 3.94 in) 400 mm x 310 mm x 125 mm (15.75 in x 12.21 in x 4.92 in) 483 mm x 355 mm x 130 mm (19.02 in x 13.98 in x 5.12 in) 483 mm x 310 mm x 130 mm (19.02 in x 12.21 in x 5.12 in) 6AU1300-0CA00-0AA0 6AU1300-0DA00-0AA0 6AU1300-0EA00-0AA0 6AU1300-0FA00-0AA0 6FC5248-0AF05-0AA0 6AV7671-3CA00-0AA0 6AV7671-5CA00-0AA0 14 Siemens PM 10 N November 2006
The for distributed installation permits physical separation of operator panel fronts and SINUMERIK PCU/NCU or. For this purpose, the operator interface is copied to one/several operator panel fronts with one TCU each. Product name Input voltage Power consumption, max. Degree of protection to EN 60529 (IEC 60529) Humidity rating in accordance with EN 60721-3-3 Relative atmospheric humidity Storage Transport Ambient temperature Storage Transport Weight,approx. Dimensions Width Height Depth 6FC5312-0DA00-0AA0 24 V DC 28.8 W IP00 Class 3K5 condensation and icing excluded. Low air temperature 0 C (+32 F). 5... 95% at +25 C (+77 F) 5... 95% at +25 C (+77 F) 5... 80% at +25 C (+77 F) -25 +55 C (-13... +131 F) -25 +55 C (-13... +131 F) 0 +55 C (+32... +131 F) 1.7 kg (3.75 lb) 260 mm (10.23 in) 265 mm (10.43 in) 40 mm (1.57 in) Integration The SINUMERIK TCU can be used for: SINUMERIK 810D powerline/840d powerline: SINUMERIK PCU 50/PCU 70 with Windows XP SP1 and with PCU basic software WinXP 7.4 and PCU basic software Thin Client, operator panel fronts and SINUMERIK PCU 50/PCU 70 with Windows XP SP2 OP 010/OP 010C/OP 010S/OP 012/TP 012/OP 015/OP 015A/ TP 015A with TFT display SINUMERIK 840Di sl SINUMERIK 840D sl: NCU 710.1/NCU 720.1/NCU 730.1, SINUMERIK PCU 50.3, operator panel fronts OP 010/OP 010C/OP 010S/OP 012/OP 015/OP 015A/ TP 015A with TFT display, operator panel fronts P012T, P012K, P015T, P015K TCU Connection overview for TCU without central OP on PCU/P350-3 Mounting bracket, flat for PCU with/without video link transmitter in control cabinet Mounting bracket, bent for PCU 50, with/without video link sender in control cabinet Mounting bracket for PCU, video link receiver or TCU behind operator panel front IE FC Standard Cable GP 2 x 2 (Type A) 4-core, shielded TP installation cable for connection to an IE FC outlet RJ45/IE FC RJ45 plug; PROFINET-compatible; with UL approval; sold by the meter; Max. length 1000 m, minimum order quantity 20 m IE FC Trailing Cable GP 2 x 2 (Type C) 4-core, shielded TP installation cable for connection to an IE FC outlet RJ45/IE FC RJ45 plug 180/90 for use as trailing cable; PROFINET-compatible; without UL approval; sold by the meter; Max. length 1000 m, minimum order quantity 20 m IE FC RJ45 Plug 180 RJ cable connector for Industrial Ethernet with rugged metal housing and integrated insulation displacement contacts; with 180 cable outlet 6FC5312-0DA00-0AA0 6FC5248-0AF20-0AA0 6FC5248-0AF20-1AA0 6FC5248-0AF20-2AA0 6XV1840-2AH10 6XV1840-3AH10 6GK1901-1BB10-2AA0 Siemens PM 10 N November 2006 15
MCI-PN communication board Current consumption 900 ma at 5 V (-4 F to +140 F) +5 C to +55 C (+41 F to +131 F) Weight, approx. 110 g (0.24 lb) Dimensions 107 mm x 167 mm (4.21 in x 6.57 in) The MCI-PN communication board for supports connection to a PROFINET IO network. This means that in terms of PROFINET, is a PROFINET IO controller that offers the following functions: PROFINET IO controller 100 Mbit/s full duplex Support of real time classes of PROFINET IO: - RT (realtime) - IRT (isochronuous realtime) Integration of distributed I/O as PROFINET IO devices Integration of drives as PROFINET IO devices through PROFIdrive according to the V4 specification Support of standard Ethernet communication (TCP/IP), e.g. for integration of SIMOTION SCOUT, HMI or standard TCP, UDP communication to any other devices. Integrated 4-port switch with 4 RJ45 sockets based on the PROFINET ASIC ERTEC400. The optimal topology (line, star, tree or ring) can therefore be constructed without the need for additional external switches. The MCI-PN communication board is inserted in the spare PCI slot of the. MCI-PN communication board A 6AU1390-0BA00-0AA0 The following PROFINET cables and connectors are recommended: RJ45 Plug 145 (1 item) RJ45 Plug 145 (10 items) RJ45 Plug 180 (1 item) RJ45 Plug 180 (10 items) Industrial Ethernet FC Stripping Tool Standard Cable GP 2x2 Flexible Cable GP 2x2 Trailing Cable GP 2x2 Trailing Cable 2x2 Marine Cable 2x2 6GK1901-1BB30-0AA0 6GK1901-1BB30-0AB0 6GK1901-1BB10-2AA0 6GK1901-1BB10-2AB0 6GK1901-1GA00 6XV1840-2AH10 6XV1870-2B 6XV1870-2D 6XV1840-3AH10 6XV1840-4AH10 A) Subject to export regulations: AL: N and ECCN: EAR99H 16 Siemens PM 10 N November 2006