AMPHENOL SOLAR PRODUCTS 2012
HELIOS H4 FULL ACCORDING NEC 2008 Although the electrical connectors attached to the ends of the module cables are finger safe when new, if they are opened under load, the dc arc may damage the insulation and the connectors may then pose a shock hazard. Therefore, there are new requirements in 690.33 for locking connectors in the 2008 NEC. A tool will be required to open these locking connectors. They will also soon be appearing on most, if not all, PV modules, although they are only required when the PV array wiring is operating above 30 volts and is readily accessible (690.33). Amphenol Helios H4 is designed to meet NEC 2008 standards without requiring additional locking mechanism. Benefits are: Lower overall cost design to comply with the new NEC codes Connector can be repeatedly mated and unmated without destroying the locking feature. Intermateble with the industry standard connector AMPHENOL, NO EXTRA ACCESSORIES TYCO EXTRA LOCKING COLAR MC4 EXTRA LOCKING SLEEVE
HELIOS H4 CONTACT TECHNOLOGY H4 uses a newly designed Radsok grid machined contact that has superior electrical performance as compared to the competition. Benefits: Self cleaning grid Extremely low temperature rise Lowest voltage drop and less than 0,15mOhm contact resistance on solid contacts TUV rated up to 65A and tested up to 90A. 0,30 mohm contact resistance on stamped and formed contacts Delivers the most power from the module and low loss along the string
HELIOS H4 RATING MARCH 2012: AMPHENOL HAS RECEIVED THE 1000V UL RATING ON THE H4 CONNECTORS
HELIOS H4 CABLE CONNECTOR 1000V UL CERTIFIED
HELIOS H4 M12 AND M14 PANEL CONNECTOR 1000V UL CERTIFIED
HELIOS H4 STAMPED AND FORMED CONTACT OPTION
HELIOS H4 SCREW CONTACT FOR FIELD INSTALLATION H4 FEMALE CONNECTOR WITH SCREW CONTACT FOR 2,5 6SQMM PV CABLE + H4 MALE CONNECTOR WITH SCREW CONTACT FOR 2,5 6SQMM PV CABLE
HELIOS H4: ONE BODY, 3 CONTACT OPTIONS!
HELIOS H5: NEW 1500V TUV AND 1000V UL CONNECTOR UL certification 1000V and higher TUV certification 1500V 2000V rating IP68 Final qualification and in 3 rd party certification
HELIOS H4 CAP FOR PANEL CONNECTOR
HELIOS H4 BRANCH CONNECTOR
H4 CABLE CONNECTOR CO MOLDED ASSEMBLIES FULLY TUV UL CERTIFIED!!
HELIOS H4 MOLDED Y, X AND T SPLITTERS
HELIOS H4 MOLDED TRUNK AND DROP
OVERMOLDED INLINE FUSE AND CABLE ASSEMBLY
OVERMOLDED INLINE FUSE AND CONNECTOR ASSEMBLY
OVERMOLDED DIODE AND CABLE ASSEMBLY
OVERMOLDED DIODE AND CONNECTOR ASSEMBLY
HELIOS H4 CABLE POWERLINK SOLAR CABLE STRANDED SOLAR CABLE TIN PLATED COPPER CROSS LINKED XLPE INNER AND OUTER JACKET UL 4703 APPROVED, TUV APPROVED 2.5, 4.0, 6.0 AND 10MM² 1000V TUV, 600&1000V UL ARMORLINK ARMORED SOLAR CABLE STRANDED SOLAR CABLE TIN PLATED COPPER CROSS LINKED XLPE INNER AND OUTER JACKET 2.5, 4.0 AND 6.0MM² ARMORED RODENT PROOF DESIGNED TO UL PV WIRE CLASSIFICATION UL AND TUV PENDING
HELIOS H4 TOOLING
NEW HELIO LUG UL2702 CERTIFIED GROUNDING LUG FOR MODULES, RELEASED FOR MASS PRODUCTION
NEW HELIO CLIP NEW GROUNDING LUG FOR MODULES UP TO 1000V UNDER SOFT TOOLING
NEW HELIO BOLT NEW GROUNDING FEATURE FOR MODULES
AMPHOTON JUCTION BOX Serviceable gasketed cover many variations of busbar termination type Non Serviceable potted version Multiple diode configurations Cable Gland or connector cable entry Solder of Clip Fit terminals
AMPHOTON PENCIL CLIP JUCTION BOX Low profile, stable performance and easy to install commonly applied in BIPV. Provide user with a practical and economical solution. Tin soldering connection
HELIOS HERCULES JUNCTION BOX
NEW CONNECTORIZED HELIOS HERCULES JUNCTION BOX Production stage: Design finalization
NEW HELIOS HERCULES II JUNCTION BOX Low profile with cost effective design Good for heating dissipation 1500V TUV and 1000V UL rating with 25A current SMD diode Potting solution Soldering connection type IP68 Production stage: Design finalization
NEW HELIOS MODLINK JUCTION BOX AMPT TECHNOLOGY Modular concept; only add what you need, when you need it. Future proof : compatible with new generation smart modules. Base unit is a complete junction box and thermally separated from panel. H4 standard connections interface Smart module snaps into base; no drilling, no additional cabling Cost effective on all level: For OEM, distributor, installer, owner/operator Can be upgraded at any time and no wasted materials when upgrading Production stage: kicked off soft tool
NEW REMOVEBLE SMART BOX TIGO TECHNOLOGY Good for heating dissipation(potting,heat fingers & air flow ). O ring sealing Potting solution for PCBA IP 65 Membrane film apply Easy installation and maintenance CSA certification( UL standard) Production stage: qualified and certified and available for mass production
NEW HELIOS OVERMOLDED THIN BOX Low profile with cost effective design Overmolding solution with better sealing, more reliable. Reduce safety risk in field, such as arc, etc. Tape or Silicone adhesive option IPX8 Rated system voltage: 1500V TUV, 1000V UL With and without diode option Production stage: under UL&TUV certification, complete by March 2012, available for mass production
NEW HELIOS CORNER BOX Low profile with cost effective design 2 in1 solution for cover and base. Over molding type Tape adhesive IP67 Production stage: kicked off soft tool
NEW HELIOS CUSTOM SOLUTIONS BASE PLATE DESIGN MODULAR JB ELBOW JB H2 MOLDED SOLUTIONS FOR BIPV