Volition. VF-45 Singlemode Socket and Patch Cords. 3Innovation IT'S AS EASY AS PLUGGING IN AN RJ-45.

Similar documents
Volition. Multimode VF-45 Socket and Patch Cords. 3Innovation

Volition. Multimode VF-45 Socket and Patch Cords. 3Innovation

VOLITION INTERCONNECT VF-45 STYLE

Volition. Modular Managed Switch. 3Innovation ETHERNET/FAST ETHERNET/GIGABIT ETHERNET

Model 1100B CHG Terminator. Operating Instructions

VF-45 TM (SG) Ferrule-Less Interconnect Proposal

3M Fiber Distribution Units 8400 Series

3M Serial Advanced Technology Attachment (SATA) Connector Signal Plug, Boardmount, Surface Mount Right Angle and PTH Vertical

3M Passive Optical Splitter Shelves and Modules

3M SlimLine 85ohm Cable Assembly

Plug & Play Universal Harness, SMF-28 Ultra Single-mode (OS2)

3 Angled Connector Housing (MC) Installation

Choose the Right Interconnect Solutions for FTTH Drop Cable Installations

A significantly increased capacity compared to other techniques is achieved with the compact SID-C module.

3M 100G QSFP28 Direct Attach Copper Cable Assemblies, 9Q Series

A Full Range for Different Applications The STG2000 modules offer three different types of IDC circuits. The Network of Networks

3M Pak 100 Wiremount Plug Series

3M DSLAM Mounting Bracket Kit J0746

3M Connectors for Embedded Systems Connectors for AdvancedTCA, CompactPCI and MicroTCA Systems from 3M

Product Data Sheet. 3M Active Optical Cable (AOC) Assemblies for CX4 and QSFP+ Applications

3M I/O Connector Mounting Options and Hardware

3M Textool Open-Top Test and Burn-In Sockets for Ball Grid Array Packages

Volition. Fast Ethernet Fiber Optic Media Converters. Installation Manual VOL-0205/VOL-0206 /VOL-0207/VOL December

3M Twin Axial Cable Assembly for Medical Electronics Packaging

3M Fiber Distribution Units 8400 Series. The Network of Networks. Flexibility for. Networks. Growing

Conductive Pressure Sensitive Cover Tape 2666

3M Compact Coarse Wave Division Multiplexer (CCWDM) Module Installation

LC Connector. A High Density Fiber Optic Network Solution. Paul Kolesar Lucent Technologies, Bell Laboratories

3M Duplex Polishing Machine 6851-E with Universal Dual Holder Instructions

3M Mini-Clamp Socket 2 mm Boardmount, Straight Solder Tails 372 Series

3M Data Center Solutions. Innovation. is the. Solution

Mounting Bracket for 8 in. Charles Industries Pedestal for use with 3M Fiber Dome Terminal Closure FDT 08

3M I/O Connector Mounting Options and Hardware

3M Add-On Terminals 4220P (100, 200, 300 & 400 pairs)

3M Textool BGA Test & Burn-In Sockets 1.00 mm, Types 0, I, II and III Open Top

Crimplok ST* and SC Non-Adhesive Fiber Optic Single & Multi-mode Connectors

PCS PATCH CORD SOLUTIONS PATCH CORD SOLUTIONS

3M Cross-Connect Cabinet Riser Installation Guide

3M Power Clamp System Power/Signal Distribution I/O Connector System

3 710 Splicing System 1

General Process Specification for Reflow Soldering of Boardmount 3M Pak Connectors, 3M CF Card Headers and 3M PCMCIA Sockets and Headers

3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series

3M SLiC Fiber Aerial Terminal Closure 530 Internal for Direct Spliced Drop Terminations. 3M External Cable Assembly Module (ECAM) 12mm Drop Entry Kit

Product Discontinuation Notice 3M Assorted Japan Sourced Connectors

QuickSpecs. Models. Features and Benefits Connectivity. HP V2124 Switch. HP V2124 Switch. Overview

13-SDMS-01 REV SDMS-01, REV.00 SEC DISTRIBUTION MATERIALS SPECIFICATION DATE: G

3M Quick Connect System (QCS) 2811

Fiber Optical Cabling Infrastructure Offer

High Shear PSA Cover Tape

Pretium EDGE Solutions Harness, 12 fibres,

Rear Pivot Latch LC Connector. A Robust SFF Fiber Optic Connector for High-Density Network Applications

3M Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series

Indoor Protected Entrance Terminal 4588 Series

3M Fiber Dome Terminal Closures FDTC 08M and FDTC 08S External Drop Termination

EDGE Solutions Hybrid Trunk, OM4, Low- Loss, MTP to LC Duplex Uniboot, 24 fibres

New Product Release Summary for 3M Authorized Sales Reps and Distributors 3M Industrial M12 Wiremount Connectors, 3N104 and 3N304 Series

3M Category 6 Copper Structured Cabling System

Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters

C o n n e c t o r s C h a p t e r 183

Polymer Coated Fiber Cable (PCF)

EC Series LC Connectors

Our Most Important Connection is with You. OSIS SECTION 7. OSIS Series

3M Indoor Protected Building Entrance Terminal 4788V-QCS Series

3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series

3M Indoor Protected Building Entrance Terminal 4588V-QCS Series

Ultra Low Loss (ULL) LazrSPEED 550 OM4 LC to LC, Fiber Patch Cord, 1.6 mm Duplex, LSZH

3M Quick Connect System (QCS) 2814

Opt-X Enterprise Fiber Trunk Cables

3M Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3

SC/APC Connector. CATV Active device Telecommunication. Metro Local Area Data processing

3M Cold Shrink QS-III Inline Splice Kits 15 kv 5415A, 5416A, 5417A, 5417A-WG, 5418A and 5418A-WG

Pretium EDGE Solutions Trunk Cable, OM3, Low-Loss, MTP to MTP, 24 fibres

3M Fibrlok II Angle Fiber Splice 2529-AS 3M Fibrlok 250 µm Angle Fiber Splice 2540-AS

3M Fiber Dome Closure FDC 08S-A. 3M Fiber Dome Closure FDC 08S-B. Constructed of highly chemicalresistant

USB Ranger 422 User Guide

3M Cross-Connect Cabinets for Midspan Applications

Construction Materials. Dimensions. Environmental Specifications. General Specifications. Mechanical Specifications

3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

Plug & Play Universal Trunks

3M Telecommunications Solutions for Networks. Volition Network Solutions Product Solution Guide. for Enterprise Networks.

USBTHERE User Guide USB204EXTFIB. Featuring ExtremeUSB Technology

Fiber Optical Cabling Infrastructure Offer

EDGE8 MTP Trunk Cable

9/27/04 cci Cablecom Inc. 1

SPEC SHEET. Multimode Patch Cords and Pigtails. Cable types. Description. Features. Fiber types

QuickSpecs. Models HP G Switch

OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE

For more information, visit: 3M Cold Shrink QS-III Splice a one-piece joint with wide range and geometric stress control

EDGE Solutions Trunk Cable, OM4, Low- Loss, MTP to MTP, 12 fibres

CORNING OPTICAL COMMUNICATIONS GENERIC SPECIFICATION FOR SIMPLEX OPTICAL FIBER (MULTIMODE) NO-EPOXY, NO-POLISH CONNECTORS

3M Cold Shrink QS-III Inline Splice Kits 25/28 kv 5456A, 5456A-WG, 5457A, 5457A-WG, 5458A and 5458A-WG

1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.

Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330

OSIS by Radiall One Step Interconnection Solution

USB Ranger Fiber Optic USB 2.0 Extender. User Guide

ProCliCk Pre-Polished ConneCtors

Plug & Play Universal Low-Loss Systems A LANscape Pretium Solutions Product

3M Connectors for CFast Cards The Next Generation of Removable CompactFlash Storage

Introduction to optical fibers and their applications

MT-RJ OPTICAL FIBER SYSTEMS TESTING. Field Testing Made Easy

Transcription:

Volition VF-45 Singlemode Socket and Patch Cords IT'S AS EASY AS PLUGGING IN AN RJ-45. The Volition VF-45 Singlemode Socket and Patch Cords from 3M are the latest duplex, fiber optic interconnect products for affordable, high bandwidth, networks. The VF-45 plug and socket work like an 8-pin modular jack, bringing the simplicity of the RJ-45 jack to optical fiber applications. VF-45 singlemode sockets can be field terminated in closet patch panels and in work area outlets for premises backbone and horizontal cabling applications. Field termination on duplex singlemode fiber using the Volition VF-45 Termination Kit takes less than two minutes, two fibers at a time! The mating VF-45 plugs, factory-terminated onto singlemode patch cords, enable interconnection from socket-to-socket or from socket-to-transceiver devices. VF-45 singlemode patch cords are provided in a variety of lengths and are also available in hybrid ST* or SC configurations. All VF-45 patch cords are constructed with the innovative 3M GGP high-strength coated optical fiber, providing durability and tight bend radius in desktop applications. 3Innovation

IT S AS EASY (CONT.) The VF-45 singlemode fiber optic interconnect conforms to 3M specifications chosen to meet even the toughest customer expectations. The VF-45 interconnect is the heart of a full system of affordable optical fiber Volition Network Solutions. FEATURES Plug-to-socket design (no adapter needed) High-density duplex interconnect V-groove alignment with injection-molded parts RJ-45 style latch Socket, snap-together assembly Tested to TIA performance specifications Patch cords made with innovative 3M high-strength fiber (requiring a minimum bend diameter of only one inch) Full line of Volition Network Solution products and services BENEFITS Low cost Small size Eliminates expensive ferrules, sleeves or precision components Familiar, easy to use Easy to install, lower labor costs Reliable Dependable in under-desk applications Warranted system offering Volition Singlemode VF-45 Socket from 3M Ordering Information Volition VF-45 Singlemode Patch Cords may be ordered in the following lengths. m (ft.) 1 (3.2) 3 (9.8) 8 (2.6) 1.5 (4.9) 5 (16.4) 15 (49.2) 2 (6.5) 6 (19.7) 30 (98.4) Model # VOL-0002 Description VF-45 Socket, Singlemode The VF-45 Socket (VOL-0002) includes socket base, housing, Socket Fiber Holder and boot; complete for termination to 250 µm coated singlemode fiber. Termination requires the VF-45 Socket Termination Kit (VOL-0560). The VF-45 Socket Fiber Holders (VOL-0011) may be purchased separately as replacement parts, if necessary. VOL-0011 VF-45 Socket Fiber Holder

VOLITION SINGLEMODE VF-45 SOCKET 0.574 (14.58) 0.650 (16.51) 0.702 (17.83) 0.325 (8.26) 0.790 (20.06) 2.053 (52.15) 0.397 (10.09) 0.807 (20.49) 1.375 34.93 1.932 (49.07) 0.715 (18.16) VOLITION SINGLEMODE VF-45 PATCH CORDS VF-45 Patch Cords are available in the following combinations: VF-45 to VF-45 VF-45 to ST* VF-45 to SC

SPECIFICATIONS Volition Singlemode VF-45 Patch Cords, interconnected with Volition VF-45 Sockets, perform to the following loss and reflection data. Volition Singlemode VF-45 Patch Cords, interconnected with Volition VF-45 singlemode sockets are tested to TIA and 3M performance specifications. This is typical performance data, not to be used for specification purposes. Singlemode Loss & Reflectance Typical Performance Loss (db) 1.310 1.310 Mean 0.20-56.4 Sigma 0.18 3.4 Reflectance (db) TIA Specifies: Loss 0.75 db Reflection 26.0 db

Volition Singlemode VF-45 Patch Cord Material Specifications Material Specification Connector Engineering Thermoplastic UL-94 V0 Boot Thermoplastic Elastomer FIber 9 µm singlemode The cable used to make Volition Patch Cords contains a singlemode optical fiber with 100 µm glass cladding diameter and a polymer coating bringing the diameter to a total of 125 µm. The polymer is a tough, permanent primary coating, which provides improved strength and bend resistance. The static fatigue parameter is a 50% improvement over standard glass. This high-strength fiber is fully compatible and intermateable with standard glass fiber. Ordering Information Volition VF-45 Singlemode Patch Cords may be ordered in the following lengths. m (ft.) 1 (3.2) 3 (9.8) 8 (2.6) 1.5 (4.9) 5 (16.4) 15 (49.2) 2 (6.5) 6 (19.7) 30 (98.4) Model Numbers VOL- Length in Meters; 1; 1.5; 2; 3; 5; 6; 8; 15; 30 Cable Jacket Type; R= Riser; L= LSZH Fiber Type by Core Size; 5= 50 µm MM; 6= 62.5 µm MM; 9 µm= SM Second Connector End; V= VF-45 Plug; T= ST*; C=SC First Connector End is Always Volition VF-45 Plug OFNR= Optical Fiber Non-Conductive Riser LSZH= Low Smoke, Zero Halogen Examples VOL- T 9 R 2 2 meters Riser 9 µm Singlemode ST* Description: VF-45 to ST*, 9 µm Singlemode OFNR Cable, 2 meters.

VF-45 Plug and Socket Material Specifications Test Performance Specifications Attenuation Reflection Mating durability Strength of coupling Impact Plug cable retention Plug flex Plug twist Cold Heat Humidity 0.75 db -26 db 500 cycles, 0.75 db 33 N, 0.75 db 8 drops @ 1.8 m, 0.75 db Tensile load 66 N, Side Pull 19.4 N, 0.75 db 100 Cycles, ± 90 degrees, 0.5 kg, 0.75 db 10 Cycles, ± 2.5 revolutions, 15 N, 0.75 db -10 C for 96 hours, 0.3 db increase +60 C for 14 days, 0.3 db increase 40 C, 95% rh for 96 hours, 0.4 db Important Notice Before using this product, you must evaluate it and determine if itis suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. 3 Telecom Systems Division 6801 River Place Blvd. Austin, TX 78726-9000 800 695-0447 FAX 512 990-7962 http://www.3m.com/volition Volition, VF-45 and the dot wave symbol are trademarks of 3M. 40% Pre-consumer waste paper 10% Post-consumer waste paper Litho in USA. 3M IPC 2000 80-6111-5983-3