A smart system with an easy touch APC SmartTouch Airborne Particle Counter
APC SmartTouch Setting new standards Particle counting is a critical component of cleanroom monitoring programs. Detecting contaminants in the air, particle counter data is relied on to determine the cleanliness of air in controlled environments such as those found in the pharmaceutical, biotechnology, medical device and sensitive food industries, complies to ISO 14644, GMP, FS209E. APC SmartTouch instruments meet JIS B 9921: 1997 and ISO 21501 standards for performance, counting efficiency and calibration. These instruments are available in either stainless steel or plastic with stainless steel components. Both units are optimal for disinfection to fulfill the most stringent hygiene standards. A built-in Pulse-Height Analyzer (PHA) is ensuring that the APC SmartTouch particle counter is performing to its stated specifications as well as meeting the requirements of ISO and JIS. This assures data integrity and inspires confidence in operation and results. Applications for APC SmartTouch Cleanroom monitoring Cleanroom certification Research Exposure assessment Indoor air quality Filter testing Clearance testing Quality assurance Contamination migration studies 2
Award winning instrument ASPEC winner Prix de l'innovation Fast and convenient operation User friendly graphics using a touchscreen Significant cost savings Dual flow rate in one instrument Minimize human error Visual representation of sample locations Improve your flexibility Free software pack attached 3
1 system 1000 possibilities Fast and convenient operation user friendly graphics using a color touchscreen Battery status Flow rate indication Data storage indication Count program Counting time Location Purge time Settings Hold time Report Count mode Brightness The interactive large color touchscreen user interface with easy-to-understand icons allows fast and convenient operation. All required actions are started with a simple touch from the main screen, without complicated multi-level menu structures. Direct access through clear structured icons simplifies the use of the APC SmartTouch without detailed instructions. This increases operator efficiency saving significant time. On the main screen all functions of the instrument are displayed (battery status, printer and laser activity). Counting results are visible on the main screen during operation, and all programming functions, settings and reports can be accessed directly. Award winning instrument ASPEC winner Prix de l'innovation ASPEC (Association for the Prevention and Study of Contamination) has re warded the unique features of the APC SmartTouch at the ContaminExpo clean room exhibition in Paris (March 2011), with the innovation prize in the catagory Instruments. 4
Significant cost savings dual flow rates in one instrument The APC SmartTouch is the first instrument specifically designed for incorporating two flow rates. The same instrument can be used for both certification as well as routine monitoring of cleanroom and controlled environments. Cleanroom certification involves checking the environment for various para meters such as High Efficiency Particulate Air (HEPA) Filter leak and air flow velocity to ensure that it is built and performs to a specific set of requirements. The ISO 14644-1 standard for filter testing recommends a one cubic foot per minute (1 CFM) particle counter. Cleanroom monitoring, however, applies a much broader approach and is performed to ensure that performance parameters in the environment have not changed, the process in the room is in control at all times, and individuals using the cleanroom always follow SOP s. The ISO 14644-2 standard determines the type and frequency of testing and defines the use of a 100 liter per minute (100 L/min) instrument. System settings: Mainscreen display of dual flow rate Incorporating both a 1 CFM and 100 L/min flow rate in a single machine, the APC SmartTouch satisfies the above needs while simultaneously eliminating the need for investment in multiple instruments and the associated routine costs from calibration events. Minimize problems visual representation of sample locations Revolutionary features allow the user to import a graphic file for a visual representation of the sampling locations; including the designated sampling points. It dramatically eliminates the potential for sampling errors while helping to ensure that the proper samples have been taken. A sample location is defined by place, building, room and point. HACCP principal can be uploaded to the instrument in a jpeg format. The APC SmartTouch Utility Software allows you to create defined parameter recipes (counting mode, count time, initial wait time, purge time and hold time) and stores designated sample location names. The features give the operator a time-saving advantage once the appropriate sample location is selected. Improve your flexibility free software pack attached Free software pack with every APC SmartTouch leverages the full potential of the instrument. Unique search functions included, file and store up to 10,000 records, start and operate the entire functionality of the instrument at a single finger tip. Complies to HACCP. 5
APC SmartTouch Including AC power cord and adapter, stainless steel isokinetic sampling probe, Hytrel tubing, table-top tripod, zero count filter, two Lithium-ion batteries, two rolls of printer paper, APC SmartTouch Download Utility Software, quick start guide and user manual. Technical specifications APC SmartTouch Channel sizes 0.3, 0.5, 0.7, 1.0, 5.0, 10.0 µm user-configurable in 0.1 µm increments from 0.3 10.0 µm Flow rates Sample output Calibration Zero count 1 CFM (cubic foot per minute), 100 L/min & 1 CFM (dual flow rate) 50 L/min, 100 L/min Internally filtered to HEPA standards Particles are traceable to U.S. National Institute of Standards and Technology (NIST) and Japanese Industrial Standards (JIS), ISO 21501 Meets JIS standards Counting efficiency 50% at 0.3 µm 100% for particles > 0.45 µm Data storage Data transfer Data reports Display Sample location Printer Housing material Dimensions (H x W x D) Weight Operating range 10,000 complete data sets, 21 CFR part 11 compliant Internal printer, Ethernet, USB, Digital/Analog I/O ISO 14644-1, EC GMP annex 1, and FS209E for cleanroom certification 8.4 VGA display, infrared touchscreen Visualization of sample locations with user-defined images Built-in thermal printer Stainless steel or high impact injection moulded plastic (Makrolon ) Stainless steel: 21 x 23 x 30 cm Stainless steel / Makrolon : 22 x 30 x 32 cm 7.2 kg without batteries 8.5 kg with batteries (plastic enclosure) 9.1 kg with batteries (steel enclosure) 0 40 C, 10 90% humidity, non-condensing 6
Ordering information APC SmartTouch Ord. No. APC SmartTouch, 1 CFM & 100 LPM, Steel (flow rate 1 cubic foot per minute & 100 L/min) 1.44093.0001 APC SmartTouch, 1 CFM, Steel (flow rate 1 cubic foot per minute) 1.44181.0001 APC SmartTouch, 50 LPM, Steel (flow rate 50 L/min) 1.44182.0001 APC SmartTouch, 100 LPM, Steel (flow rate 100 L/min) 1.44183.0001 APC SmartTouch, 1 CFM & 100 LPM, Plastic (flow rate 1 cubic foot per minute & 100 L/min) 1.44089.0001 APC SmartTouch, 50 LPM, Plastic (flow rate 50 L/min) 1.44092.0001 APC SmartTouch, 100 LPM, Plastic (flow rate 100 L/min) 1.44091.0001 APC SmartTouch Accessories Ord. No. Lithium-ion Battery (1 piece) 1.44144.0001 Carrying Case (with wheels and handle) for plastic instruments for stainless steel instruments 1.44148.0001 1.44259.0001 Thermal Printer Paper (5 rolls) 1.44147.0001 Temperature / Relative Humidity Probe (only in conjunction with recalibration) 1.44088.0001 Air Velocity Probe (only in conjunction with recalibration) 1.44087.0001 Isokinetic Probe 1 CFM 50 L/min 100 L/min 1.44084.0001 1.44121.0001 1.44119.0001 Filter Scanning Probe, 1 CFM (including tubing) 1.44083.0001 Sampling Tubing (per meter) 1.44104.0001 Purge Filter 1.44079.0001 APC Compressed Gas Adapter (select the right nozzle set below) 1.44179.0001 Nozzle Set Compressed Gas Adapter 1 CFM 50 L/min 100 L/min 1.44070.0001 1.44168.0001 1.44166.0001 Power Supply (including country-specific power cord) 1.44145.0001 USB Connection Cable 1.44100.0001 Table-top Tripod (for Isokinetic Probe, including adapter) 1.44105.0001 APC SmartTouch Download Utility Software 1.44077.0001 APC SmartTouch Qualification Handbook (for performing complete IQ, OQ and PQ of APC SmartTouch Airborne Particle Counters, English) 1.44076.0001 External Charger (including country-specific power cord) 1.44146.0001 Network Cable (1 meter) 1.44075.0001 7
We provide information and advice to our customers on application technologies and regulatory matters to the best of our knowledge and ability, but without obligation or liability. Existing laws and regulations are to be observed in all cases by our customers. This also applies in respect to any rights of third parties. Our information and advice do not relieve our customers of their own responsibility for checking the suitability of our products for the envisaged purpose. The M mark is a trademark of Merck KGaA, Darmstadt, Germany. For more information: www.merckmillipore.com/biomonitoring 2012 Merck KGaA, Darmstadt, Germany. All rights reserved. W289104 PB4232EN00 05/12