DATASHEET STYPE KIT - TRACKING SYSTEM FOR CAMERA CRANES A SYSTEM FOR HIGH-END VIRTUAL AND AUGMENTED REALITY BROADCAST

WWW.STYPEGRIP.COM DATASHEET STYPE KIT - TRACKING SYSTEM FOR CAMERA CRANES A SYSTEM FOR HIGH-END VIRTUAL AND AUGMENTED REALITY BROADCAST

PAGE 2

STYPE KIT OVERVIEW Stype Kit is a mechanical tracking system for camera cranes. Professionals can use the system in high-end television studios for virtual studio and augmented reality broadcast. Complete freedom of production techniques is available with the Stype kit: green or blue screen, augmented reality (no screens), inside or outside broadcast. Stype kit is designed and manufactured by Stype in EU. FEATURE WHY IT IS BENEFITIAL BOLT-ON SYSTEM No need for physical modifications of the crane no special tools are necessary and you get to keep your crane s warranty. This also means you can reuse the Stype kit on different cranes and on different locations. AUTOMATIC AIMING & FOCUSING Stype kit enables automatic aiming and focusing targeting. Move the crane arm and don t worry about focus or frame. Very useful for beginner camera crane operators. More experienced operators can get creative with this feature, too. ROBUST & STANDALONE No need for external sensors, special floor surfaces or markers in the studio. Camera crane and Stype kit is everything you need. NO NEED FOR LINE-OF-SIGHT Because of mechanical tracking, there is no problem with interfering objects. NOT PHOTOSENSITIVE Works equally well in a dark studio and outdoors in the sun. EASY AND FAST SETUP Takes half an hour for initial installation and ~15 minutes for initial calibration. LENS CALIBRATION Save time and do a better job with Stype kit s integrated lens calibration feature. PORTABLE Every component fits easily in a standard flight case take it with you anywhere. COST EFFECTIVE You can use your existing camera crane and don t need to invest in expensive add-ons. PAGE 3

TECHNICAL SPECIFICATIONS TABLE SERIAL PORT RS-422, 38 400 kbps PROTOCOLS FREED, STYPE ETHERNET UDP over IP DATA OUTPUTPOWER UP Genlock synchronized BACKUP Offsets are permanently stored in nonvoilatile memory ENCODER INPUT (8 CHANNELS) Pan, Tilt, Roll/External Encoder, Zoom, Focus, Dolly RE-CALIBRATION TIME AFTER POWER UP Under 30 sec DOLLY Travel on tracks (rail) CAMERA TILT ANGLE 360 degrees CAMERA PAN ANGLE 360 degrees HEAD MAX SPEED 90 degrees/sec HEAD MAX PAYLOAD 22,6KG TRACK MAX LENGTH 13 METERS ACCURACY (ANGLE) +-0.05 DEGREES CANON LENSES DIGITAL PROTOCOL CRANE PAN RESOLUTION FUJION LENSES DIGITAL PROTOCOL CRANE TILT RESOLUTION AUTO AIMING HEAD PAN RESOLUTION AUTO FOCUSING HEAD TILT RESOLUTION DATA RECORDING FOR POST PROCESSING HEAD ROLL RESOLUTION INPUT POWER 24V DOLLY RESOLUTION 31,066 PULSES PER M POWER CONSUMPTION KIT WEIGHT 50W 13KG ZOOM ENCODER RESOLUTION ~8,500 PULSES PAGE 4

LEFT RIGHT SYSTEM CONFIGURATION SCHEME 1 PAN/TILT/ROLL CRANE PAN/TILT CAMERA FOCUS/ZOOM TRAVEL ON DOLLY Stype kit sensors are placed on all pivot points of the camera crane. Sensors collect the positional data of the camera in 3D space. 2 3 POSITIONAL DATA IN RENDER GENLOCK IN VR DATA OUT VR DATA IN ENGINE AC POWER IN Data is sent to the Stype kit main console in real-time where position is calculated and sent to the render engine. Render engine composites the real-time camera footage and 3D virtual graphic overlays. STYPE KIT CONSOLE - CONNECTOR SIDE 1 USB Mini USB connector used to connect with PC for firmware upgrade. 2 24V POWER SUPPLY standard 3 pin XLR for 24V power supply connector for connecting with power supply. 3 VIRTUAL OUTPUT Ethernet connector used for virtual studio serial output, as well as UDP/IP output of camera position, rotation, zoom and focus. 4 SYNC BNC connector for connecting BlackBurst Genlock signal. 5 DOLLY 4 pin connector used to connect a string encoder if the crane is used on a dolly, or to connect a focus external encoder when the kit is used on a fixed tripod. 6 HEAD CABLE 24 pin AMP plug for connecting with head 24 pin cable. If you try to connect it to 37-pin head extension cable it will not work. 1 2 3 4 5 7 JOYSTICK 16 pin AMP plug for connecting with Stanton joystick and zoom/focus handle. 6 7 8 9 8 ROLL Used to connect Roll joystick when the roll axis is used on the camera head. 9 SENSORS 12 pin Hirose female connector for connection with encoder set (part #7). PAGE 5

COMPATIBLE CAMERA CRANES CamMate Systems 2000 SERIES TRAVEL SERIES Jimmy Jib SUPER TECHNO 2012 CRANE REACH 7,3FT (2.21M) T1 REACH 5FT (1.52M) TRIANGLE STANDARD REACH 6FT (1.8M) SUPERTECHNO 20 (TELESCOPIC) REACH 17FT (5,2M) 2018 CRANE REACH 13FT (4.17M) T15 REACH 9FT (2.74M) TRIANGLE GIANT REACH 12FT (3.6M) SUPERTECHNO 30 (TELESCOPIC) REACH 22,8FT (6,9M) 2024 CRANE REACH 20,1FT (6.12M) T18 REACH 13FT (3.96M) TRIANGLE SUPER JIB REACH 17,7FT (5.4M) SUPERTECHNO 50 (TELESCOPIC) REACH 37,5FT (11,4M) 2032 CRANE REACH 26,6FT (8.08M) T21 REACH 17,5FT (5.31M) TRIANGLE SUPER PLUS REACH 24FT (7.3) 2039 CRANE REACH 32,11 FT (10,03M) T25 REACH 21FT (6,40M) TRIANGLE EXTREME REACH 30FT (9.1M) 2043 CRANE REACH 39,4FT (11.99M) TRIANGLE 12 METER HEIGHT 40FT (12M) 2050 CRANE REACH 45,9FT (39,94M) OTHER CAMERA CRANES ARE AVAILABLE ON REQUEST. DELIVERY TIME IS FROM 2-4 WEEKS. OPTION: EVERY CRANE CAN BE PUT ON TRACKS COMPATIBLE RENDER ENGINES marketgraph PAGE 6

PAGE 7