Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon I/O Isolation 000VAC Continuous Short circuit protection Operating Temp: -0 C to + C Energy Star compliant Input: -VAC, -Hz, or 0-0VDC Compact package Over current, Over Voltage Protection Efficiency up to % Models Single output Model Input Voltage (VAC/Hz) Input Voltage (VDC) Output Voltage (V) Output Current max (A) Maximum capacitive Load (µf) Efficiency 0VAC (%) AME0-.SVZ -/- 0-0. 000 0 AME0-SVZ -/- 0-0 900 AME0-9SVZ -/- 0-0 9. 00 AME0-SVZ -/- 0-0 0.9 00 0 AME0-SVZ -/- 0-0 0. 00 AME0-SVZ -/- 0-0 0. 0 Note: Add suffix -ST for optional screw terminal bottom plate or -STD for optional DIN Rail screw terminal bottom plate. Input Specifications Current (full load) VAC 0 ma 0 VAC 0 ma Inrush current <ms (cold start) VAC A 0 VAC A Leakage current 0VAC/0Hz 0. ma External fuse Recommended slow blow type A Output Specifications Voltage accuracy.vdc output ± % Other output ± Line regulation Full load, main output ±0. % Load regulation (single output) 0-% load ± % Minimum load 0 % Ripple & Noise * 0 mv p-p VAC, 0MHz bandwidth ms Hold-up time 0VAC, 0MHz bandwidth 0 ms *Ripple and Noise are measured at 0MHz bandwidth & 0VAC with the recommended Application Circuit. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 0 sec 000 VAC Isolation Resistance >0 MΩ General Specifications Switching frequency % load KHz Protection class Class I Over current protection 0 % of Iout Over voltage protection Zener diode clamp Short circuit protection Continuous, Auto recovery Operating temperature See derating curve -0 to + o C Storage temperature -0 to +0 o C F 0e R.A of North America only
.00 (0.).00 (0.).00 (0.0).00 (.).0 (0.9).00 (0.0).0 (0.9) General Specifications(Cont.) Maximum Case temperature o C Temperature coefficient ±0.0 % / o C Cooling Free air convection Humidity Non condensing 9 % RH Case material Plastic (flammability to UL 9V-0) Weight PCB mountable model: With optional -ST mounting plate: With optional -STD mounting plate: g Dimensions (L x W x H) MTBF PCB mountable model: With optional -ST mounting plate: With optional -STD mounting plate:. x. x 0. inches (.00 x.00 x.00mm). x. x. inches (9.0 x.00 x 9.0 mm). x. x. inches (9.0 x.00 x.0 mm) > 00,000 hrs (MIL-HDBK -F, t=+ o C)/Full Load NOTE: All specifications in this datasheet are measured at an ambient temperature of C, humidity<%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Standards Information technology Equipment Design to meet IEC/EN/UL EMI - Conducted and radiated emission CISPR/EN0, class B Electrostatic Discharge Immunity IEC 0--, Contact ±kv/air ±kv, Criteria B RF, Electromagnetic Field Immunity IEC 0--, 0V/m, Criteria A Electrical Fast Transient/Burst Immunity IEC 0--, ±kv, ±kv with external circuit, Criteria B Surge Immunity IEC 0-- L to L ±kv, L to L ±kv/l to G ±kv with external circuit, Criteria B RF, Conducted Disturbance Immunity IEC 0-- 0Vr.m.s, Criteria A Voltage dips, Short Interruptions Immunity IEC 0-- 0%, 0%, Criteria B Dimensions Pin Out Specifications.00 (0.).00 (.) Bottom.00 (.).00 (0.) Top DIV: 0.00 (0.0) Pin Single Ground AC Input (N) AC Input (L) -V Output No pin No pin No pin +V Output Ø.0 (Ø 0.0) Dimensions mm (inch) Case Tolerance ±0.0 (±0.0) Pin Diameter.0 ± 0.0 (0.0 ± 0.00).00 (0.0) F 0e R.A of North America only
With optional -ST bottom plate 9.0 (.).0 (.9) Ø.0 (0.).0 (0.).0 (0.99).0 (.).00 (.).00 (.).00 (.).0 (0.) MST Top Side view 0.0 (0.).00 (.) 9.0 (.) Dimensions: mm (inch) Case Tolerance: ±.00 (0.0) Holding holes tolerance: ±0.0 (0.0) Wire gauge: -AWG With optional -STD bottom plate 9.0 (.).0 (.9) MST Top Dimensions: mm (inch) General Tolerance: ±.00 (0.0) Holding holes tolerance: ±0.0 (0.0) Wire gauge: -AWG DIN rail type: TS Side view F 0e R.A of North America only
Derating Free Air Convection Free Air Convection at C Output power (%) 0 0 0 0 0 Safe Operating Area Input -0VAC or 0-0VDC Output Power (%) 0 0 0 0 Safe Operating Area 0 0 - -0-0 0 0 0 0 0 Ambient Temperature º C 0 0 () (0) 0 (0) Input Voltage VAC (VDC) (0) Typical application circuits FUSE A/0V Single Output MOV SK00 AC DC C µf/0v + C TVS Earth/GND EMC recommended circuits Recommended use AMFE00-LN FUSE A/0V L.uF/A LCM 0mH CY 0pF/ 00VAC Single Output MOV SK00 CX 0.uF/ VAC CY 0pF/00VAC AC DC C µf/0v + C TVS F 0e R.A of North America only
Model C TVS. Vout 0 µf V Vout 0 µf V 9 Vout 0 µf V Vout 0 µf 0V Vout 0 µf 0V Vout µf 0V NOTE:. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications.. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured.. Mechanical drawings and specifications are for reference only.. All specifications are measured at an ambient temperature of C, humidity<%, nominal input voltage and at rated output load unless otherwise specified.. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release.. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet.. Warranty is in accordance with Aimtec s standard Terms of Sale available at www.aimtec.com. F 0e R.A of North America only