MOSS-DVR-810 Mobile Digital SD Recorder User Manual Before installing and using, be sure to read this Manual for best performance.
ATTENTION This product is to be used within the vehicle interior. In order to prevent shortcircuit or the risk of electrical shock, do not use this product within a wet environment. In the event of any foreign solid or liquid entering the DVR, please disconnect the power immediately, and have a qualified technician confirm safe operation. The product is high-tech equipment, with no user-serviceable parts. Please refer all service to qualified technical personnel. Installation Environment Please ensure that the power supply to the DVR is in the range of 8-48V DC before turning on. If you will not be using the DVR for a long period, please disconnect the power. Please select an appropriate location for the installation of the DVR, and allow sufficient space for adequate air flow. Do not install the DVR in areas of high heat or extreme vibration and mechanical shock. Packing List Name Quantity Four Channel SD Recorder 1 User Manual 1 Certificate of Quality 1 Remote Control 1 Connection Port PC View CD 1 Shockproof pad, DVR holdder, Screw, etc. 1 Note: Due to continuing product improvements, specifications and features are subject to change without notice.
Contents Installation Environment... 2 Packing List... 2 Product Overview... 3 Features... 4 Operating System... 4 Video Compression Standard... 4 Surveillance and Video Processing... 4 Playback and Search... 4 SD Card and Backup... 4 Control... 4 Designed to Prevent Vibration... 4 Others... 4 Technical Parameters... 5 Optional Features... 6 Installation Instructions... 6 External Interface Wiring... 6 4-pin Connector layout... 7 SD Card Installation... 7 Using the DVR... 8 Front Panel... 8 LED... 8 Key and other Descriptions... 8 Remote Control Operation... 9 Menu Setup... 10 Video Data Capacity... 11 Product Overview This four-channel embedded digital SD Card video recorder is designed for vehicle safety and surveillance. It uses an embedded processor and embedded operating system, combined with video/audio compression/decompression, GPS, vehicle recorder, and SD card storage technology to ensure high intelligence and high stability. Widely used for buses, ships, trains, and other areas where mobile security is required.
Features Operating System Embedded Linux operating system for stability Simple Menu User-Interface. Graphical on-screen display. Video Compression Standard H.264 Video Format: Excellent images, and the most efficient bit stream. Surveillance and Video Processing Surveillance: 4 channels D1 video (PAL: 720 * 576, NTSC: 720 * 480) Recorder: Total resources 100 PAL, 120 NTSC. 4 channels CIF (PAL: 352 * 288, NTSC 352 * 240), HD1 (PAL: 720 * 288, NTSC: 720 * 240), D1 (PAL: 720 * 576 NTSC: 720 * 480) video storage separately. Three record modes: Alarm record, Schedule record and Manual record. Supports 4 channels of video and 4 channel of audio recording simultaneously. Video quality: Eight levels, user-selectable. Specially designed video file system to prolong the life and improve the security of SD card. The video & audio data of SD storage can not be artificially modified, to preserve evidentiary value. Playback and Search Playback is according to date & time. Supports 4 channel video and 4 channel audio playback simultaneously, or 1 channel video and audio playback (using our PC viewer software). If playback is from the DVR to a LCD monitor, then 1 channel video and 1 channel audio playback is supported. SD Card and Backup Double SD card storage, supports max 32G each, 64G total. Remove the SD card and create backups with special software in your computer, via your card reader. Backup can be accomplished by using the USB connection on your computer (the USB port in the main unit is equipped only upon customer s requirements; USB port backup SD card at this time when 2 is invalid). Control Remote control. Dual MCU control, high reliability. Designed to Prevent Vibration The circuit board and all electronic parts & components in the machine are antivibration and consolidated for reliability. The entire system has anti-vibration construction. Others USB software upgrading, simple maintenance and upgrading. Password-protection to prevent data tampering. Prevents voltage surges, has low voltage supply protection. Time-lapse shut-down functin (adjustable--default: 5 seconds). Real-time clock.
Technical Parameters Items Item Name 4 Channel Mobile DVR (HDD Storage) Item Number TS-810 Solutions H.264 Main Profile System Operation Interface Graphical Interfaces Password control User Password Video Video Input 4 ch Independent Input: 1.0Vp-p, 750. Both B&W and Color Cameras Video Output 1 Channel PAL/NTSC Output, 1.0Vp-p, 750, Composite Video Signal Video Display 1 or 4 Screen Display Video standard PAL: 25 frames/sec NTSC: 30 frames/sec System resources PAL: 100 Frames; NTSC: 120 Frames Audio Audio Input Four Channels Independent Input 6000 Audio Output 1 Channel (select any of 4 channels) Basic Output Level 1.0-2.2V Distortion Plus Noise -30dB Recording Mode Sound and Image Synchronization Audio Compression ADPCM Digital Image Compression H.264 Fixed Code Stream Processing Image format 4* CIF (352*288), or 4* HD1 (720*288), or & Storage 4*D1 (720*576) Video Stream CIF: 8K-64Kb/s HD1 & D1: 115M-340Mb/s Video Usage of SD card CIF: 28M-230Mb/hr/ch HD1 & D1: 115M-340Mb/hr/ch Resolution Playback 1 Channel Video Streaming Standard H.264 Main Profile Audio Bit Rate 4Kb/s/channel Audi Usage of SD card 14Mb/hr/channel Internal Storage Double SD card storage, Max. 32 GB each Others Image Quality Power User-selectable, eight levels DC8-48V 5% 12W Working -4 F (-20 C) ~ 140 F (+60 C)/ 80% Temperature/humidity Packaging Clock Product Size Buil-In Clock, Calendar 6 (L) x 7.5 (W) x 2.05 (H) (with bracket) Product Weight 1.2 lbs
Optional Features GPS module Ports (one RS-232, one RS-485, cradle head control, PELCO-D, Baud rate 9600, address code 0x01) 3G module Intercom function Installation Instructions External Interface Wiring Audio Input 12V RS 232 (RX) RS 232 (TX) EXTEND Ground Audio Output Ground Video Output Alarm Input 3 Alarm Input Ground Alarm Input 1 Alarm Output RS 485 RS 232 (TX) SENSOR Alarm Input 2 RS 232 GND Alarm Input 4 RS 232 (RX) RS 485+ Alarm Output Reserved Reserved 8-45V in, Connect to Vehicle Power Reserved Vehicle Power Detection Vehicle Power GND
4-pin Connector Layout CH1 CH2 CH3 CH4 3G/GPRS GPS SENSOR EXTEND DEBUG Remarks: If the power supply is 12V, then the current of 12V ouput is limited to 1A. If there are more than 3 cameras, we suggest that customers get power for other cameras from the 12V vehicle power directly. RS485 and RS232 interfaces are optional. Ports: DEBUG: testing port EXTEND: intercom connection port SD Card Installation Unlock the unit with the key, making sure that the arrow points to the UNLOCK position. Note: The lock also controls the power. When it is placed in the locked position, it also means that the DVR is powered and ready to use. Before turning on, please make sure all the cables in the system are well connected; otherwise, damage could occur.
Using the DVR Front Panel PWR RUN GPS SD1 IR ACC REC 3G SD2 VIDEO USB 2 1 LED PWR LED: Lit when system is active. Power LED on. RUN LED: LED flashes when during normal operation. SD LED: Flashes when recording, playing back or backing up. GPS LED: GPS activity indicator. 3G LED: 3G activity indicator. ACC LED: Vehicle started indicator REC LED: Recording indicator Key and Other Descriptions IR: Infrared receiving window for remote control. LOCK: Secures the SD Card, and controls DVR power. USB: Plays back the video clips of the SD Card via USB. 1: SD card slot 2: SD card slot Video: Video output
Remote Control Operation Select Camera 2 Select Camera 1 (REC/PLAY) 1 2abc 3def (REC/PLAY) Select Camera 3 (REC/PLAY) Select Camera 4 (REC/PLAY) 4ghi 5jkl 6mno Display all (REC/PLAY) 7pqrs 8tuv 9wxyz 0 Enter Menu Increase Value MENU ESC Navigate Left Decrease Value OK Navigate Right Confirm PTZ A-B Record Stop REC PLAY Play Paus e Note: The numeric keys may be used when entering passwords.
Menu Setup In Live (non-recording) mode, press MENU. If this the first time entering the MENU, the system will display ENTER THE PASSWORD (The default password is 6666). When finished, press OK to exit the MENU interface. In Record mode, please press STOP to stop recording, then press MENU to enter the MENU interface. Settings: To set up items as below TIME: Sets the time. CAR LICENSE: Sets the vehicle ID number. VIDEO MODE: Sets the video standard (NTSC or PAL). Takes effect upon restart of the DVR. DELAY TIME: Sets the timer turn-off function. Default time is 5 seconds. Can be set to 5, 30, 60, 120, 300, 600, 1200, 1800, 3600 or 7200. Takes effect upon restart of the DVR. PASSWORD: To change the password, you need to enter the original password. NEW PASSWORD: Set the new password SD Card: Set up and check the information on the SD Card. SD Card OVERWRITE: Setup the rewrite function. SD Card TOTAL SIZE: Show the total capacity of the SD Card. SD Card FREE SIZE: Show the remaining capacity of the SD Card. SD Card FORMAT: Formats the SD Card. Requests password, if you are using one. Record: Settings for the video files. REC RESOLUTION: CIF/HD1/D1 RECORD FRAME: 1~30 frames (adjustable). REC QUALITY: Sets the picture quality (8 levels total, LOWEST---HIGHEST). DISPLAY CH: Sets the channels-display on the viewing monitor. FILE TIME: Sets record time of image files (300 ~ 3600 seconds). VIDEO RECORD CH: Sets the recording video channels. RED means record. AUDIO RECORD CH: Sets the recording audio channels. RED means record. REC SCHEDULE: Sets the recording mode for different start/stop times. White: No recording Red: Recording S: Alarm recording Search: Play back the recorded videos. FILE LIST: Display the date of the videos and select the date to see the time list of the videos within that day. Select the desired time, and press PLAY on the remote control to play back the clip. PLAYCAK CH: Only 1 channel at a time can be played on your monitor (all can be viewed on the computer application). This selects the channel for playback.
Video download: Connect USB Flash Drives or HDD to USB interface in front of the DVR Shift to Playback menu, select target video for download by Remote control, press OK to start copy. Repeat for each section. Alarm: Alarm record time: 10-90 seconds since alarm record. GPS Transmission Interal: GPS signal transmission interval Network: DOMAIN NAME: Used for 3G real-time viewing--sets server domain. SERVER PORT: Used for 3G real-time viewing--sets server port. STREAM SIZE: Available sizes--24kbps, 48kbps, 96kbps, 128 kbps. STREAM FRAME: Available rates--1~30 fps. Video Data Capacity Required capacity of video and video-related settings: VIDEO QUALITY Total Record Frames Data Size Per Hour HIGHEST 120 Frames 1120 MB HIGHER 120 Frames 1012 MB HIGH (defualt) 120 Frames 900 MB BETTER 120 Frames 780 MB NORMAL 120 Frames 675 MB LOW 120 Frames 560 MB LOWER 120 Frames 450 MB LOWEST 120 Frames 340 MB Note: Calculate recording time based upon your settings.