smartbridges airpointpro Wireless Access Point airpointpro Long Range - Like never before.
airpoint PRO is well-suited for use in a variety of other settings smartbridges Public parks Stadiums Marinas Convention centers Warehouses Beaches Shipyards Factories airpoint-pro in Access Point Mode airpoint-pro in Client-Bridge Mode (Multi MAC) Point to point mode airbridge Internet Backbone Access Point and Client-Bridge (Multi-MAC) mode Point to multipoint mode Technical Specifications Product No: SB2515 Output Power (with antenna): upto +30dBm EIRP max with suitable antenna system configuration (Adjustable using "dial-a-power" software and antenna configuration to suit regulatory specifications) Transmitter Output Power (Device): +17.5 dbm max Receiver Sensitivity: -92dBm at 1Mbps / -83dBm at 11Mbps Antenna Connector, Impedance: N(Female) Bulkhead Mount, 50 ohms Power Source: Power over Ethernet enabled device remotely powered by SB2811 & AC/DC Adapter SB2811 PowerShot: Power over Ethernet cable - Injecting Device Input 12V DC, Data separately, Output Data + Power combined on RJ45 connector (pins 4, 5 = Gnd; 7, 8 =+12V) Standards: IEEE802.11b, IEE 802.3 PC Interface: Ethernet 10 base T Frequency Band: 2400 to 2483.5Mhz, ISM Band Wireless Media Access Protocol: CSMA/CA with ACK Wireless Data Rates: 11Mbps CCK with Auto Fallback to 5.5Mbps CCK / 2Mbps DQPSK / 1Mbps DBPSK Channels (Overlapping): 11 FCC, 13 ETSI, 14 Japan Modulation: DSSS with CCK / DQPSK / DBPSK AC / DC Adapter: Input: 90 to 260V AC, 50 / 60Hz, output: 12V DC, 1A Power Consumption: 7W (typical) Management: SNMP ver 1 (MIB, Tarps); TFTP (FW download) Mounting: Pole or wall mount via 2pc U-Bolts & clamps (supplied) Cable: 50 feet outdoor rated CAT5E cable connected to the Device; Length can be extended to Ethernet Spec. of 100 meters Enclosure include I/O ports: Water Tight to NEMA4, 4X, 6, 12, 13; IP66; IK08 Operating Temperature: -40 deg C (-40 F) to +65 deg C (+150 F) Relative Humidity: 10% to 90% typical Dimensions: 130mm x 130mm x 35mm (5.11 inches x 5.11 inches x 1.38 inches) Weight: 0.55kg (1.21 lbs) Features at a glance Features Access Point, Client-Bridge and Wireless Bridge mode operations. Rugged weatherproof design in a compact and stylish enclosure. Flexible mounting on wall or antenna mast (up to 2 inch diameter). Powered through Ethernet cable using powershot PoE injector. Enhanced output power for extended highspeed communication -upto 34 kms (21 miles) at 11Mbps. High receiver sensitivity; provides error free data transfer. Complete 14 channel support for worldwide usage. Multi-feature security to avoid unauthorized access. Auto fall back data rate for long distance communication in noisy environments. Embedded with SNMP MIBS for remote monitoring features. Firmware is upgradeable to protect your investment. Comprehensive 1 year warranty. Package Contents
smartbridges airbridge Wireless Ethernet Client Simplifying the last mile
smartbridges airbridge is a preferred CPE device to quickly and efficiently widen the reach of Broadband Wireless Internet Service Providers. Its unique LongRange wireless design, ease of installation, PoE and flexible antenna options lend WISP networks vital capabilities making network launches and expansions economically viable. airbridge is well-suited for use in a variety of other settings. Public parks Stadiums Marinas Convention centers Warehouses Beaches Shipyards Features at a glance Technical Specifications Product No: SB2110 Output Power (with antenna): upto +30dBm EIRP max with suitable antenna system configuration (Adjustable using "dial-a-power" software and antenna configuration to suit regulatory specifications) Transmitter Output Power (Device): +17.5 dbm max Receiver Sensitivity: -92dBm at 1Mbps / -83dBm at 11Mbps Antenna Connector, Impedance: N(Female) Bulkhead Mount, 50 ohms Power Source: Power over Ethernet enabled device remotely powered by SB2810 & AC/DC Adapter SB2810 PowerShot: Power over Ethernet cable - Injecting Device Input 12V DC, Data separately, Output Data + Power combined on RJ45 connector (pins 4, 5 = Gnd; 7, 8 =+12V) Standards: IEEE802.11b, IEE 802.3 PC Interface: Ethernet 10 base T Frequency Band: 2400 to 2483.5Mhz, ISM Band Wireless Media Access Protocol: CSMA/CA with ACK Wireless Data Rates: 11Mbps CCK with Auto Fallback to 5.5Mbps CCK / 2Mbps DQPSK / 1Mbps DBPSK Channels (Overlapping): 11 FCC, 13 ETSI, 14 Japan Modulation: DSSS with CCK / DQPSK / DBPSK AC / DC Adapter: Input: 90 to 260V AC, 50 / 60Hz, output: 12V DC, 1A Power Consumption: 7W (typical) Management: SNMP ver 1 (MIB, Tarps); TFTP (FW download) Mounting: Pole or wall mount via 2pc U-Bolts & clamps (supplied) Cable: 50 feet outdoor rated CAT5E cable connected to the Device; Length can be extended to Ethernet Spec. of 100 meters Enclosure include I/O ports: Water Tight to NEMA4, 4X, 6, 12, 13; IP66; IK08 Operating Temperature: -40 deg C (-40 F) to +65 deg C (+150 F) Relative Humidity: 10 to 90% typical Dimensions: 130mm x 130mm x 35mm (5.11 inches x 5.11 inches x 1.38 inches) Weight: 0.55kg (1.21lbs) Rugged weatherproof design in a compact and stylish enclosure Ideal for wireless LAN access in all indoor and outdoor areas. Flexible mounting on wall or antenna mast (up to 2 inch diameter) Enhanced output power for long range coverage of up to 34 kms (21 miles) at 11Mbps High receiver sensitivity; provides error free data transfer Auto Fall back data rate for long distance communication in noisy environments Powered through Ethernet cable using powershot PoE injector Driver-less operation with true 'Plug and Play' Works with all Operating Systems High level security with full 128 bit Key WEP encryption Compatible with IEEE 802.11b & IEEE 802.3 standards Firmware is upgradeable to protect your investment Comprehensive 1 year warranty Package Contents
HyperGain HG2424G 2.4 GHz 24 dbi High Performance Reflector Grid Antenna Superior Performance The HyperGain HG2424G High-Performance Reflector Grid Antenna provides 24 dbi gain with an 8 degree beam-width for long-range highly directional applications. It can be installed for either vertical or horizontal polarization. Rugged and Weatherproof This antenna s construction features a rust-proof cast aluminum reflector grid for superior strength and light weight. This antenna's 2-piece reflector grid is simple to assemble and significantly reduces shipping costs. The grid surface is UV powder coated for durability and aesthetics. The open-frame grid design minimizes wind loading. Electrical Specifications Frequency Gain 2400-2500 MHz 24 dbi -3 dbi Beam Width 8 degrees Cross Polarization Rejection 26 dbi Front to Back Ratio Sidelobe Impedance Max. Input Power VSWR Mechanical Specifications Weight Grid Dimensions Mounting Elevation Angle 24 db -20dB Max 50 Ohm 50 Watts < 1.5:1 avg. 4.8 lbs. (2.18 kg) 39.5 in (100 cm) x 23.5 in (60 cm) 2 in. (50.8 mm) diameter mast max. 0 to +10 degrees Operating Temperature -45 C to +85 C Wind Loading Data Wind Speed (MPH) Loading (2.1 sq. ft.) 40 16.4 lb. 60 36.3 lb. 80 63.8 lb. 100 97.0 lb. 120 147.0 lb. 140 199.5 lb. e-mail: sales@hyperlinktech.com tel: 561-995-2256 fax: 561-995-2432 web: www.hyperlinktech.com 1201 Clint Moore Road Boca Raton FL 33487
Available Connectors This antenna is supplied with a 24" pigtail with any of the connectors listed in the tables below. Specify the desired connector by choosing the appropriate part number. Standard Connectors The following standard connectors are available from stock: Connector Type N Female N Male Part Number HG2424G-NF HG2424G-NM Special Order Connectors This antenna is also available with the any of the following connectors by special order at a nominal additional charge. If you do not see your connector listed please contact our sales department. Connector Type Part Number TNC Female HG2424G-TF TNC Male HG2424G-TM Reverse Polarity TNC Female HG2424G-RTF Reverse Polarity TNC Male HG2424G-RTM Reverse Polarity N Female HG2424G-RNF Reverse Polarity N Male HG2424G-RNM SMA Male HG2424G-SM Reverse Polarity SMA Female HG2424G-RSF Guaranteed Quality This product is backed by Hyperlink's Limited Warranty. e-mail: sales@hyperlinktech.com tel: 561-995-2256 fax: 561-995-2432 web: www.hyperlinktech.com 1201 Clint Moore Road Boca Raton FL 33487
Radiation Patterns e-mail: sales@hyperlinktech.com tel: 561-995-2256 fax: 561-995-2432 web: www.hyperlinktech.com 1201 Clint Moore Road Boca Raton FL 33487