Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick RT00 Series Crane & Hoist Joystick Product Features Single axis or dual axis control; Pure silver contacts to ensure durable; Spring return in 0-position or Friction brake adjustable; Resistant to oil, maritime climate, ozone and UV radiation; Support horizontal and vertical contact drive arrangements; The energized current up to 80V 0A, with reliable performance; million life cycles. Application 00 series industrial crane & hoist joystick (master controller) are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 0Hz, 60Hz voltage 80V and 0V DC to control the hoist crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake. Technical Information Environment Parameter Storage Temperature Operating Temperature Protection Grade Vibration Amplitude±g, Frequency: 0Hz-00Hz Impact 0g, 6ms, Semi-sinusoidal EMC Anti-interference Rank 00V/m, 0MHz to GHz, 80% sine-wave modulation, meet EN008- (99) standard EMC Emission Rank Rank B, 0KHz to 0MHz, meet EN008- (99) standard ESD Anti-interference Rank Rank, 8KV contact discharge, KV air discharge, meet IEC6000-- standard Mechanical Parameter Mechanical Angle Operating Torque Mechanical Life Mechanical Error Electrical Parameter -0 C +80 C -0 C +80 C IP6 Potentiometer: ±, Hall sensor: ±0 N (0N max) million ±0. Power Supply Voltage ±0.V DC Hall sensor Power Supply Current Consumption 6.mA/hall sensor tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com 0
RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Resolution Ratio infinite Maximum Voltage VDC Hall sensor Reversed Polarity Maximum Voltage.VDC Potentiometer Product Configuration Serial Number Operation Mode Load Resistance KΩ Median Voltage (no-load) 8 - %Vs Power Supply Voltage DCV Power Supply Current <0mA Resolution Ratio infinite Resistance (0%) KΩ and 0KΩ Electrical Angle ± Output Voltage Range (relative voltage) 0 00%; 0 90% Median Voltage 8% % Potentiometer Maximum Load Voltage VDC Maximum Power Consumption ( C) 0.W Switch Direction switch position ± No. Item Content RT00 Series Crane & Hoist Joystick Controller M - friction hold, MS - friction hold & center-lock, T - spring return to center, TS - spring return to center & center-lock Handle Assembly Type L: switch assembled Horizontal (default), I: switch assembled Vertical Electrical Output Form. Y axis. Y & X axis cross direction. Y & X axis full direction Hall sensor Potentiometer HV: DC V, 0. V (rail to rail) HV: DC V, 0...V HV: DC V,.0..0V HV: DC V,...7V P: Simple directions output (potentiometer with dead zone) P: Simple direction output (potentiometer without dead zone) V: DCV, -0V 0 +0V (voltage output) V: DCV, +0V 0 +0V (voltage output) V: DCV, -V 0 +V (voltage output) V: DCV, +V 0 +V (voltage output) V: DCV, 0 +0V (voltage output) V6: DCV, 0 +V (voltage output) I: wire ma ma 0mA (current output) I: wire 0mA ma 0mA (current output) 0 tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com
Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick 6 Potentiometer Type K, K, K, 0K, 0K or H (Hall sensor) 7 8 Contact Arrangement Handle/Grip Type Refer to Table - - Contact Arrangement Refer to Table - -8 Handle: HD, HD, HD, HD, HD, HD7, HD8, HD0, HD, HD80 9 Mounting Dimensions M: 8 8, central hole 6, M: 8 8, central hole 78 serial number operation mode limiter plate handle assembly type electrical output form Product Installation RT00 - MS - - L - P (0K) - () - HD9 - M 6 7 8 9 L type mounting dimension handle/grip type contact arrangement potentiometer type I type tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com 0
RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table - Handle Type HD HD HD HD HD6 6 7 8 9 0 HD7 HD8 HD9 HD0 HD9 with or without Self-resetting button (BT) or Self-lock button (BS) Reference - with or without Self-resetting button (BT) or Self-lock button (BS) Reference - Push to release (mechanical button) with or without Self-resetting button (BT) or Self-lock button (BS) Reference - Multi-combinations, Refer to Table - Multi-combinations, Refer to Table - -7 Diameter 0 60 Diameter Diameter Diameter 0 87 Diameter 0x60 Diameter 0 max Diameter Diameter 0 8 pull to release with latch for mechanical zero interlock Diameter 0 60 Diameter x HD80 with or without Self-resetting button (BT) or Self-lock button (BS) Reference - Diameter 9x6 0 tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com
Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick Table - Handle HD9 HD9 Handle 7 70 0 HD9 handle can be installed with a variety of accessories: self-lock button and self-resetting button. With different combinations to meet the industry's needs: solenoid valve amplifier control, variable frequency motor control. We can customize special technical parameters according to your requirements. HD9 handle use PA66 + 0GF, with excellent high temperature performance, can be installed in Joystick RT00 and RT0 to achieve multi-axis control Operation Temperature: -0-8 Storage Temperature: -0-8 Meet IEC68 part -0 Protection Grade IP6/6 HD9 - BT 7 R BS 6 G 6 7 handle type self-resettling button button quantity button location 8 button color button location button color button quantity self-lock button button selection reference Table - tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com 0
RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table - Handle HD0 HD0 Handle 07 0 HD0 handle is ergonomically designed, provides a high degree of comfort, highly integrated, multi-channel buttons control output and the handle can be installed with a variety of accessories: analog output of thumbwheel controller, self-resetting (momentary) push button, self-locking push button or rocker switch. With different combinations to meet demands of industrial application for example: solenoid valve amplifier and variable frequency motor control. HD0 handle/grip uses PA66 + 0GF, with excellent high temperature performance, can be installed in joystick of RT00, RT00, RT0 and RT0 to achieve multi-axis control. Operation Temperature -0~-8 Storage Temperature -0~-8 C Meet Standard IEC68. part -0 Protection Grade IP6/6 Model Selection Style Description (all functions selection refer to the Table - HD0a 6 0 without Deadman trigger HD0b BT with Deadman trigger 06 tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com
Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick Table -6 Handle HD0 Button Panel Model Selection Style Description (all functions selection refer to the Table -) 6 7 8 9 W00 W00 W00 Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install 6 self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) and proportional thumbwheel (W00) or rocker switch (QTOT) Can install self-resetting button (BT) / self-locking button (BS) and proportional thumbwheel (W00) or rocker switch (QTOT) proportional thumbwheel controller (W00) or rocker switch (QTOT) tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com 07
RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table -6 Handle HD0 Button Panel Model Selection Style Description (all functions selection reference Table -) 0 handle type handle panel model code self-resettling (momentary) button button quantity W00 Q proportional thumbwheel controller (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) proportional thumbwheel controller (W00) or rocker switch (QTOT) HD0b - BT R G - QTOT position self-resetting rocker switch button color button location button selection refer to Table - 08 tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com
Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick Table - Accessories No. Type Description Parameter Remark 6 BT BS QTOT QTO QSOS Table - Mounting Dimension Self-resetting button Self-locking button position self-resetting rocker switch position self-resetting rocker switch position self-locking rocker switch VA VA pins 0VA pins 0VA pins 0VA W00 Thumbwheel Controller (Hall Sensor) HV, HV, HV, HV No. Mounting Code Mounting Size Description M 8 8 central hole 6 button color Red - R Blue - BL Black - B Yellow - Y Green - G White - W button color Red - R Blue - BL Black - B Yellow - Y Green - G White - W Warning: Please Far away from the magnetic object 8 8 6 Application M 78 8 8 central hole 78 tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com 09
RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table - Contact Arrangement 6 6 6 () 6 () 6 () 6 () 6 () 6 (6) 6 (7) 0 6 6 6 6 6 6 6 6 6 6 6 6 () () () () (6) (7) (8) () () () () (6) (7) (8) () () (9) 0 0 tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com
Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick Table - Contact Arrangement () () () () () (6) (7) 0 (9) (0) () () () () () 0 0 0 () 0 0 (8) () tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com
RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table - Directional Switch Signal Closed Position Electrical Output Form Entity on behalf of the switch is closed 9 8 7 6 Hall sensor Potentiometer 9 8 7 6 Analog output refer to the following figure I: wire ma ma 0mA (current output) I: wire 0mA ma 0mA (current output) 0 HV: DC V, 0. V (rail to rail) HV: DC V, 0...V HV: DC V,.0..0V HV: DC V,...7V P: Simple directions output (potentiometer with dead zone) P: Simple direction output (potentiometer without dead zone) V: DCV, -0V 0 +0V (voltage output) V: DCV, +0V 0 +0V (voltage output) V: DCV, -V 0 +V (voltage output) V: DCV, +V 0 +V (voltage output) V: DCV, 0 +0V (voltage output) V6: DCV, 0 +V (voltage output) tel: +86 9 8 00 fax: +86 9 8886 69 e-mail: info@runntech.com website: www.runntech.com