Xitanium LED driver Datasheet Xitanium LED drivers linear HV non-isolated Enabling future-proof LED technology Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as linear lighting, as well as down lighting and spot/accent lighting. Reliability is enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal de-rating. Most drivers feature central D operation. In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an adjustable output current. Application-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand. enefits Features Application High reliability underpinned by Up to 95 efficiency, lowest cost and 17W, 36W and 75W LED drivers 5 year warranty Future-proof flexibility - smallest dimensions Operating windows - output current can be for office applications 110W and 150W LED drivers for application-oriented operating adjusted via the Philips MultiOne industry, warehouses, public windows enable LED generation configurator (TD drivers) or with a resistor areas, distribution centers and and complexity management outside the driver shopping malls ompatibility - adjustable output current enables operation of various LED Reduced ripple current and thermal de-rating for increased reliability Multiple versions - DALI diable & solutions from different prograable, 1-10V diable, and manufacturers or OEM own fixed-output; designs July Flicker 2015 and noise free diing All T5 form factors but various lengths Longer life time (100khrs), improved surge with all Touch and DALI LED and burst (4kV) and Tambient (-40 to drivers due to amplitude +60 ) specifications
Electrical input data minal input voltage 220...240 Vac performance range minal input frequency 50...60 Hz minal input current 0.11 A Input voltage 230 Vac minal input power 23 W Power factor >= 0.9 Total harmonic distortion <= 20 @ full load. See graph. Efficiency 87 @230V @ full load Input voltage A 202...254 Vac Operational range Input frequency A 47.5...63 Hz Maximum permissible range Regulation method onstant urrent Output voltage 54...72 Vdc Output voltage max. 280 V Peak voltage at open load Output current 0.28 A Full output current setting Output current tolerance ±8 Output current ripple LF <= 30 Ripple = peak / average Output power 20 W Full output ontrol method Fixed @230V @ full load @230V @ full load @ full load. See graph. Electrical output data Electrical data controls input Logistical data Product name Order code Logistic code 12N 9290 009 60406 EAN3 Pieces per box 2/7 20
Wiring & onnections Input wire cross-section 0.5...1.5 2 16...20 AWG Input wire strip length 8...9 Output wire cross-section 0.5...1.5 2 16...20 AWG Output wire strip length 8...9 Maximum cable length 600 Total length of wiring including LED module, one way Dimensions and weight Length (A1) 209 Width (1) 30 Height (1) 21.5 Fixing hole diameter (D1) 4.1 Fixing hole distance (A2) 195 Weight 140 gram Operational temperatures and humidity Ambient temperature +0...+50 º Tcase-max 75 º for 30K Hrs lifetime Tcase-life 65 º for 50K Hrs lifetime Measured at Tc-point Maximum housing temperature 110 º In case of a failure Relative humidity 10...90 n-condensing 3/7
Storage temperature and humidity Ambient temperature -25...+85 º Relative humidity 5...95 n-condensing Driver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life. Lifetime Maximum failures = 10 Prograable features Remark Set output current (AO) See Design-in guide. Default output current: <= 280 ma LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Remark Features Open load protection Yes Automatic recovering Short circuit protection Yes Automatic recovering Over power protection Yes Automatic recovering Hot wiring Suitable for fixtures with protection class I per IE60598 ertificates and standards Approval marks E Ingress Protection classification 20 4/7
Inrush current Inrush current Ipeak 4.7 A Input voltage 230V Inrush current Twidth 50 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type <= 30 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current Typical touch current 0.7 ma peak Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 0.5 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 1 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Surge iunity 5/7
Graphs Operating window Power factor versus output power Efficiency versus output power 6/7
2015 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: July 9, 2015 www.philips.com/technology