V102M-PD 100Mbps VDSL2 LAN Extender with 802.3af PoE PD embedded V102M-PD is a VDSL2 LAN Extender providing a broadband transmission up to 100/100Mbps for downstream/upstream over single pair copper line or coaxial cable for point-to-point Ethernet connectivity. With 100/100Mbps data rate, V102M-PD supports transmission distance up to 300 meters and less data rate for 2km long range connection. Users may also select a fixed data rate or a fixed SNR margin for different copper line ranging. With plug and play features and minimum installation time, a pair of V102M-PD offers a cost effective solution for bandwidth-hungry applications such as video streaming and FTTB over single twisted pair telephone line or coaxial cable. In some working environment, there is no power outlet nearby, V102M-PD is able to be powered by remote PoE Switch or injector. This makes the V102M-PD is working without local power facility and perform LAN extender over DSL or coaxial line perfectly. Features: Compliant with ITU-T G.993.1, G.993.2 VDSL2 Standard Compliant with IEEE 802.3af PoE standard VDSL2 Profiles: 8a/b/c/d, 12a/b, 17a, 30a Band Plan 997 and 998 supported
Supports Back-to-back applications Annex A, Annex B, Annex C supported US0 Supported OLR Supported Compliant with VDSL2 MIB Ethernet packets over VDSL2 100/100Mbps DownSream/UpStream for distance up to 300 meters Trellis Coding support up to 1024 Discrete Multi-Tone (DMT) bin Supports DSL connection up to 2000 meters Selectable Fast and Interleaved modes Selectable fixed data rate and fixed SNR margin Auto MDIX for 10/100 BaseT Ethernet LAN Ports 4 Dip Switches for Master/Slave Configurations Low-Latency for Video/Voice/Data applications Technical Specifications: VDSL Transmission: ITU-T G.993.1/2, SG15Q4 DMT Compliance Trellis Code with 1024 DMT bins Max Data Rate: 100/100 Mbps RJ-11 Connector x 1 POTS Interface: Optional Annex A, B, or C RJ-11 Connector x 1 LAN Interface: Auto-Detection for 10/100 BaseT and Half/Full duplex High performance bridge for Ethernet extension Fully compatible with IEEE802.3/IEEE802.3u Automatic MDIX Function, RJ-45 Connector x 2 LED Indicators: POWER: Power or PoE is ON DSL: VDSL Loop Connection Status LAN1: Data Activity of LAN Port1 M/S: Master/Slave Selection LAN2: Data Activity of LAN Port2
Physical Dimension: Desktop: 120 x 90 x 28 (mm) Power: 5VDC 2A Operating Environment: Humidity: 5% to 95% non-condensing Temperature: 0 ~ 50 degree C Regulatory Compliance: FCC Rules Part 15, CE Application Diagram: LAN-to-LAN Extension over DSL Line Public Switched Telephone Network POTS POTS 100/100 Mbps for 300m Ethernet Max 2km for DSL Line LAN1 Router LAN2 *LAN Extension over Cat 5/6/7 cable or coax : PoE-enabled PoE Switch PoE 100m V102M-PD-M 100 Mbps for 300m Cat.5/6/7 cable or Coax V102M-PD-S PoE PoE Switch 100m Wifi AP Wifi AP
Data Rate & Distance: Performance in AWG 26 Line at 6dB without rate limit Down Stream Data Rate (Mbps) Up Stream Data Rate (Mbps) Distance (feet) 100 100 1000 100 60 1200 90 44 1350 80 36 1500 70 27 1750 60 18 2000 48 11 2500 39 8 3000 35 3.5 3500 28 0.3 4000 Ordering Information V102M 100M LAN Extender, Fast Ethernet, local power, RJ45 V102M-PD 100M LAN Extender, Fast Ethernet, PoE built-in, RJ45 V102M-B 100M LAN Extender, Fast Ethernet, local power, BNC V102M-B-PD 100M LAN Extender, Fast Ethernet, PoE built-in, BNC Other items working with V102M-PD for varied application: VPS800 : 19-inch 8-Bay Power cabinet accommodating V102M-PD x 8 for central management.
V102M-BNC-PD : It shall work in a pair to perform long reach ethernet over coaxial network (EoC). V102M-PD-ODU : IP-65 ODU enclosure for V102M-PD V102M-PD-Rack : 19 15-slot cabinet accommodating V102M-PD x 15 pcs. PoE PSE injector /Hub / Switch : Please visit www.yoda.com.tw for more PoE items. PS800 : 8p PoE SW PS2400 : 24p PoE SW PI300 : 1p PoE Injector PW541 : 4p PoE SW