Device Profile Document

Similar documents
DNP3 V3.00 DEVICE PROFILE DOCUMENT

Campbell Scientific Australia DNP3 DEVICE PROFILE

DNP 3.0 device profile for AQ (5) DNP 3.0 device profile for AQ 200

SOFTWARE DOCUMENTATION. DNP3 Configuration / Interoperability Guide for the DATRAN II excel DNP3 RTU

SOFTWARE DOCUMENTATION. DNP3 Configuration / Interoperability Guide for the DATRAN XL4 DNP3 RTU

NOTE The documentation and/or manuals provided by the IEDs vendors must be read and understood thoroughly prior to configuration.

DNP V3.00 Protocol Assignments

Protection Terminal REF 54_ Protection Relay REX 521

DNP Points List and Implementation

DNP3 Device Profile. Device Profile Template. Data Dictionary. Release 2.0. January 30, 2001

GE MDS, LLC. NETio Series. Protocol Communications Supplement. March 2013 Part No A01, Rev. C

DNP3 Communication User's manual

EVO AT SERIES BATTERY CHARGER AT SERIES BATTERY CHARGER COMMUNICATIONS MANUAL. EVO - Microprocessor Controlled Float Battery Charger JA

A36D/TPSD DNP 3.0 & Modbus SCADA INTERFACE

DNP 3.0 & Modbus SCADA INTERFACE INSTRUCTIONS FOR 205T BASED SYSTEMS

DNP3 Device Profile Based on DNP XML Schema version Showing both the Device's Capabilities and its Current Configuration

DNP Points List and Implementation for the 6802 Vista Control

DNP3 Field Device Profile. for

IEC Protocol Interoperability List

PXM 4/6/8K DNP3 PXM 4/6/8K DNP3 Ethernet Communications User Manual

General Specifications

SCADA Controlled LOR/ER - DNP3.0 Communications Protocol - TECHNICAL MANUAL ES-SLOR-1

General Specifications

The Multilin DGCV Voltage Regulator Controller

350 Feeder Management System

FLITE 395-GPRS-DNP3. DNP 3.0 communication Appendix to the User Manual. Easergy range. MV electrical network management

345 Transformer Protection System

Advantage CT/LTC Protocol Manual

TOP Server V5 to MicroLogix Using DNP3 Ethernet Driver

DAQ Electronics, Inc 262B Old New Brunswick Road, Piscataway, NJ

Voltage regulator TAPCON 240

DNP3 Device Profile Based on DNP XML Schema version

DNP3 SPECIFICATION DEVICE PROFILE

DNP Master Serial Driver Help 2010 Kepware Technologies

Release 2.11 Standard AXE Primary Firmware is not intended for use on any 8521 Controller not licensed as a RTU.

DNP3 Device Profile Document For ARE-M Series Float Chargers Single-Phase Input

Driver Manual. FS DNP3 Ethernet

850 Feeder Protection System

DNP3 SPECIFICATION DEVICE PROFILE

DNP3 Master Serial Driver PTC Inc. All Rights Reserved.

DNP3 INTEGRATION KIT FOR PAC CONTROL USER S GUIDE

DNP3 Communications Protocol

WebAccess DNP3 Master Ethernet Driver Guide. Advantech WebAccess. - DNP3 Master Ethernet Driver Guide Version: 1.01

PM296/RPM096 POWER QUALITY ANALYZERS. Application Note: DNP Setup Using PAS V Report by Exception. BB0127 Rev. A1

Release 2.11 Standard AXE Primary Firmware is not intended for use on any 8521 Controller not licensed as a RTU.

ECE 444/544 Supervisory Control & Critical Infrastructures Lectures 20 & & 28 March 2018

FieldServer FS DNP 3.0 Ethernet

The DNP3 plugin PRINTED MANUAL

Kepware Technologies Differences Between 4x and 5x for DNP Drivers

Voltage regulator TAPCON 260

A DNP3 Protocol Primer

Protocol Gateway DNP3.0 Client/Server

DNP3 Master Ethernet Driver PTC Inc. All Rights Reserved.

PACiS SPP DNP3. Gateway and C264 SPP/EN DNP3/D10. Slave Protocol Profile DNP3. Issue A1. PACiS V5

InstrumentationTools.com

DNP3 Client Configuration

1. System Topology Required Equipment and Components Hardware Equipment Software Equipment... 6

MicroLogix 1400 Programmable Controllers FRN 13

IEC Master Driver Help Kepware Technologies

DNP Master Ethernet Driver Help Kepware Technologies

DNP Master Serial Driver Help Kepware Technologies

DNP3 Server and Introduction to the Tag Processor Exercise

Technical Note DNP3 & Control Relay Output Block Command

IEC Master Driver Help Kepware Technologies

1. System Topology Required Equipment and Components PcVue SCADA Modbus Slave MGate 5109 Setting...

REL 512 Connectivity With A Harris Westronics RTU Using DNP 3.0

DNP3 Router. User Manual A-DNP3R. Document No. D /2018 Revision 1.24

SCADAPack DNP Driver. User and Reference Manual

Relion Protection and Control. 615 series DNP3 Communication Protocol Manual

IntelliCAP PLUS Supplement for Landis & Gyr Telegyr 8979 Protocol

Relion product family. Grid Automation Remote Monitoring and Control REC615 DNP3 Communication Protocol Manual

Control Indicator Module (CIM) - DNP3 Communications Protocol - TECHNICAL MANUAL

CP30/G30/MC31 Firmware Service Update Version 2993 (19 Aug 2013) Release Notes

Tejas V Master Protocol

Model IR4000M. Multi-Point Monitor Modbus programming guide

MVI56-DNPSNET ControlLogix Platform DNP 3.0 Server over Ethernet Communication Module

CP30/G30/MC31 Firmware Version 3100 Known Issues

Relion 615 series. Feeder Protection and Control REF615 DNP3 Point List Manual

Relion Protection and Control. REF615R DNP3 Communication Protocol Manual

Host Controller Systems. Instruction Manual

Metrologics, LLC. Modbus Client Application User s Manual

Series PM130 PLUS Powermeters PM130P/PM130E/PM130EH

Communications guide. Line Distance Protection System * F1* GE Digital Energy. Title page

Acuvim II Series Power Meter DNP3.0 (Distributed Network Protocol) User's Manual

MicroLogix 1400 Programmable Controllers FRN 21

Siemens S7-200 Driver PTC Inc. All Rights Reserved.

General Monitors S5000 Modbus Specification. Order No.: MANS5000M/00. MSAsafety.com

BECKHOFF DNP3 Slave Driver User Manual

IEC Master Driver PTC Inc. All Rights Reserved.

M6xx. DNP3 Manual. M6xx Measurement Centre and Transducer. Measurement Centre and Transducer GRID

TOP Server 5 DNP Advanced Operations. Control Relay Output Block Commands

MicroLogix 1400 Programmable Controllers FRN 21

Mettler Toledo Driver PTC Inc. All Rights Reserved.

F650 Firmware Release Notes / History (Rev 10)

MODEL IR5500 Infrared Open Path Gas Detector HART Field Device Specification

ProLinx DNPS. ProLinx Gateway DNP 3.0 Slave USER MANUAL

For CP-30 and G30 RTUs Version Toolbox Plus+ for CP-30 and G30 RTUs

Setting the DCM Switches

HART USER GUIDE FOR GASSONIC OBSERVER-H ULTRASONIC GAS LEAK DETECTOR

idevos MODBUS RTU PROTOCOL

Transcription:

Voltage Regulators CL-6A Regulator Control DNP3 Device Profile Document Reference Information R225-90-11 Device Profile Document For Communications Protocol DNP3 For Use With Cooper Power Systems CL-6A Regulator Control June 2004 New Issue Printed in USA

CL-6A DNP3 Device Profile Document

CL-6A Device Profile Document DNP3 DEVICE PROFILE DOCUMENT This document must be accompanied by a table having the following headings: Object Group Request Function Response Function Object Variation Request Qualifiers Response Qualifiers Object Name (optional) Vendor Name: Cooper Power Systems Device Name: CL-6A Regulator Control Equipped with Version 1.02.00 Firmware (Front Panel Function Code 89) Highest DNP Level Supported: For Requests 2+ For Responses 2+ Device Function: Master Slave Notable objects, functions, and/or qualifiers supported in addition to the Highest DNP Levels Supported (the complete list is described in the attached table): Explanations for configurable items can be found in the Cooper Control Interface software and supporting documentation. This product does not support Frozen Counters This product supports Octet (Character) Strings Objects 110 Maximum Data Link Frame Size (octets): Transmitted 292 Received (must be 292) Maximum Application Fragment Size (octets): Transmitted 2048 Received 2048 Maximum Data Link Re-tries: None Fixed at Maximum Application Layer Re-tries: None Configurable Configurable, range None to 255 Requires Data Link Layer Confirmation: Never Always Sometimes If 'Sometimes', when? Configurable If 'Configurable', how? Via Cooper Control Interface software. Rev 3.0 Page 1 of 6 26-Apr-04

Requires Application Layer Confirmation: Never Always (not recommended) When reporting Event Data (Slave devices only) When sending multi-fragment responses (Slave devices only) Sometimes If 'Sometimes', when? For non-final fragments in a multi-fragment response. Configurable If 'Configurable', how? Via Cooper Control Interface software. Timeouts while waiting for: Data Link Confirm None Fixed at Variable Configurable Complete Appl. Fragment None Fixed at Variable Configurable Application Confirm None Fixed at Variable Configurable Complete Appl. Response None Fixed at Variable Configurable Others Attach explanation if 'Variable' or 'Configurable' was checked for any timeout Sends/Executes Control Operations: WRITE Binary Outputs Never Always Sometimes Configurable SELECT/OPERATE Never Always Sometimes Configurable DIRECT OPERATE Never Always Sometimes Configurable DIRECT OPERATE - NO ACK Never Always Sometimes Configurable Count > 1 Never Always Sometimes Configurable Pulse On Never Always Sometimes Configurable Pulse Off Never Always Sometimes Configurable Latch On Never Always Sometimes Configurable Latch Off Never Always Sometimes Configurable Queue Never Always Sometimes Configurable Clear Queue Never Always Sometimes Configurable Attach explanation if 'Sometimes' or 'Configurable' was checked for any operation. Timing Declarations: Time base drift over a ten minute time period: 60 milliseconds Maximum time delay measurement error: 30 milliseconds Maximum Internal time reference error when set from the protocol: 30 milliseconds Maximum Response Time: 300 milliseconds Accuracy of Event measurement: 2000 milliseconds (OBJ 22 & 32), 200 milliseconds (OBJ 12) Maximum Select to Execute delay: Configurable to 655 seconds Maximum delay from Startup to IIN1-4 assertion: 18 Seconds Numeric Event Generation: Default ~ Deadband: Event generated when Abs (VALUENEW VALUEOLD) > Deadband Collision Avoidance Method: None Implemented per TB 9804-007 Rev 3.0 Page 2 of 6 26-Apr-04

FILL OUT THE FOLLOWING ITEM FOR MASTER DEVICES ONLY Expects Binary Input Change Events: Either time-tagged or non-time-tagged for a single event Both time-tagged and non-time-tagged for a single event Configurable (attach explanation) FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY Reports Binary Input Change Events when no specific variation requested: Never Only time-tagged Only non-time-tagged Configurable to send both, one or the other (attach explanation) Reports time-tagged Binary Input Change Events when no specific variation requested: Never Binary Input Change With Time Binary Input Change With Relative Time Configurable (attach explanation) Sends Unsolicited Responses: Never Configurable (attach explanation) Only certain objects Sometimes (attach explanation) ENABLE/DISABLE UNSOLICITED Function codes supported Sends Static Data in Unsolicited Responses: Never When Device Restarts When Status Flags Change No other options are permitted. Default Counter Object/Variation: No Counters Reported Configurable (attach explanation) Default Object Default Variation Point-by-point list attached Counters Roll Over at: No Counters Reported Configurable (attach explanation) 16 Bits 32 Bits Other Value Point-by-point list attached Sends Multi-Fragment Responses: Yes No Filtering is performed based on Source Address: Device Supports Multi-Master Mode: Yes No Yes No Rev 3.0 Page 3 of 6 26-Apr-04

CL-6A Implementation Table This table describes the objects, function codes, and qualifiers used in the CL-6A OBJECT REQUEST (DNP message components parsed by the CL-6A) RESPONSE (DNP message components reported by the CL-6A) Obj Var Description Func (dec) Qual (hex) Func (dec) Qual (hex) 1 0 Binary Input - All Variations 1,22 00,01,06 1 1 Binary Input 1 00,01,06 129 00,01 1 2 Binary Input with Status 1 00,01,06 129 00,01 2 0 Binary Input Change - All Variations 1 06,07,08 2 1 Binary Input Change without Time 1 06,07,08 129,130 17,28 2 2 Binary Input Change with Time 1 06,07,08 129,130 17,28 2 3 Binary Input Change with Relative Time 1 06,07,08 10 0 Binary Output - All Variations 1 00,01,06 10 1 Binary Output 10 2 Binary Output Status 1 00,01,06 129 00,01 12 0 Control Block - All Variations 12 1 Control Relay Output Block 3,4,5,6 17,28 129 Echo of request 12 2 Pattern Control Block 5,6 17,28 12 3 Pattern Mask 5,6 00,01 20 0 Binary Counter - All Variations 1,7,8,9,10, 00,01,06 22 20 1 32-Bit Binary Counter 1 00,01,06 129 00,01 20 2 16-Bit Binary Counter 1 00,01,06 129 00,01 20 3 32-Bit Delta Counter 1 00,01,06 20 4 16-Bit Delta Counter 1 00,01,06 20 5 32-Bit Binary Counter without Flag 1 00,01,06 129 00,01 20 6 16-Bit Binary Counter without Flag 1 00,01,06 129 00,01 20 7 32-Bit Delta Counter without Flag 1 00,01,06 20 8 16-Bit Delta Counter without Flag 1 00,01,06 21 0 Frozen Counter - All Variations 1,22 00,01,06 21 1 32-Bit Frozen Counter 1 00,01,06 21 2 16-Bit Frozen Counter 1 00,01,06 21 3 32-Bit Frozen Delta Counter 1 00,01,06 21 4 16-Bit Frozen Delta Counter 1 00,01,06 21 5 32-Bit Frozen Counter with Time of Freeze 21 6 16-Bit Frozen Counter with Time of Freeze 21 7 32-Bit Frozen Delta Counter with Time of Freeze 21 8 16-Bit Frozen Delta Counter with Time of Freeze 21 9 32-Bit Frozen Counter without Flag 1 00,01,06 21 10 16-Bit Frozen Counter without Flag 1 00,01,06 21 11 32-Bit Frozen Delta Counter without Flag 21 12 16-Bit Frozen Delta Counter without Flag 22 0 Counter Change Event - All Variations 1 06,07,08 22 1 32-Bit Counter Change Event without Time 1 06,07,08 129,130 17,28 22 2 16-Bit Counter Change Event without Time 1 06,07,08 129,130 17,28 22 3 32-Bit Delta Counter Change Event without 1 06,07,08 Time 22 4 16-Bit Delta Counter Change Event without 1 06,07,08 Time 22 5 32-Bit Counter Change Event with Time 1 06,07,08 129,130 17,28 22 6 16-Bit Counter Change Event with Time 1 06,07,08 129,130 17,28 22 7 32-Bit Delta Counter Change Event with Time Rev 3.0 Page 4 of 6 26-Apr-04

OBJECT REQUEST (DNP message components parsed by the CL-6A) RESPONSE (DNP message components reported by the CL-6A) Obj Var Description Func (dec) Qual (hex) Func (dec) Qual (hex) 22 8 16-Bit Delta Counter Change Event with Time 23 0 Frozen Counter Event - All Variations 1 06,07,08 23 1 32-Bit Frozen Counter Event without Time 1 06,07,08 23 2 16-Bit Frozen Counter Event without Time 1 06,07,08 23 3 32-Bit Frozen Delta Counter Event without Time 1 06,07,08 23 4 16-Bit Frozen Delta Counter Event without Time 1 06,07,08 23 5 32-Bit Frozen Counter Event with Time 1 06,07,08 23 6 16-Bit Frozen Counter Event with Time 1 06,07,08 23 7 32-Bit Frozen Delta Counter Event with Time 23 8 16-Bit Frozen Delta Counter Event with Time 30 0 Analog Input - All Variations 1,22 00,01,06 30 1 32-Bit Analog Input 1 00,01,06 129 00,01 30 2 16-Bit Analog Input 1 00,01,06 129 00,01 30 3 32-Bit Analog Input without Flag 1 00,01,06 129 00,01 30 4 16-Bit Analog Input without Flag 1 00,01,06 129 00,01 30 5 Short Floating Point Analog Input 1 00,01,06 129 00,01 30 6 Long Floating point Analog Input 30 7 Extended Floating Point Analog Input 31 0 Frozen Analog Input - All Variations 31 1 32-Bit Frozen Analog Input 31 2 16-Bit Frozen Analog Input 31 3 32-Bit Frozen Analog Input with Time of Freeze 31 4 16-Bit Frozen Analog Input with Time of freeze 31 5 32-Bit Frozen Analog Input without Flag 31 6 16-Bit Frozen Analog Input without Flag 32 0 Analog Change Event - All Variations 1 06,07,08 32 1 32-Bit Analog Change Event without Time 1 06,07,08 129,130 17,28 32 2 16-Bit Analog Change Event without Time 1 06,07,08 129,130 17,28 32 3 32-Bit Analog Change Event with Time 1 06,07,08 129,130 17,28 32 4 16-Bit Analog Change Event with Time 1 06,07,08 129,130 17,28 32 5 Short Floating Point Analog Change Event 1 06,07,08 129,130 17,28 32 6 Long Floating Point Analog Change Event 32 7 Short Floating Point Analog Chg Event w/ Time 1 06,07,08 129,130 17,28 33 0 Frozen Analog Event - All Variations 33 1 32-Bit Frozen Analog Event without Time 33 2 16-Bit Frozen Analog Event without Time 33 3 32-Bit Frozen Analog Event with Time 33 4 16-Bit Frozen Analog Event with Time 33 5 Short Floating Point Frozen Analog Event 33 6 Long Floating point Frozen Analog Event 33 7 Extended Floating Point Frozen Analog Event 40 0 Analog Output Status - All Variations 1 00,01,06 40 1 32-Bit Analog Output Status 1 00,01,06 129 00,01 40 2 16-Bit Analog Output Status 1 00,01,06 129 00,01 40 3 Short Floating point Analog Output Status 1 00,01,06 129 00,01 41 0 Analog Output Block All Variations 41 1 32-Bit Analog Output Block 3,4,5,6 17,28 129 Echo of request 41 2 16-Bit Analog Output Block 3,4,5,6 17,28 129 Echo of request 41 3 Short Floating point Analog Output Block 3,4,5,6 17,28 129 Echo of request 50 0 Time and Date - All Variations 50 1 Time and Date 1,2 07, qty=1 129 Echo of request 50 2 Time and Date with Interval 51 0 Time and Date CTO - All Variations 51 1 Time and Date CTO 51 2 Unsynchronized Time and Date CTO Rev 3.0 Page 5 of 6 26-Apr-04

OBJECT REQUEST (DNP message components parsed by the CL-6A) RESPONSE (DNP message components reported by the CL-6A) Obj Var Description Func (dec) Qual (hex) Func (dec) Qual (hex) 52 0 Time Delay - All Variations 52 1 Time Delay Coarse 129 07, quantity=1 52 2 Time Delay Fine 129 07, quantity=1 60 0 Not defined 60 1 Class 0 Data 1 06 60 2 Class 1 Data 1 20,21,22 06,07,08 06 60 3 Class 2 Data 1 20,21,22 06,07,08 06 60 4 Class 3 Data 1 20,21,22 06,07,08 06 70 1 File Identifier 80 1 Internal Indications 2 00, index=7 81 1 Storage Object 82 1 Device Profile 83 1 Private Registration Object 83 2 Private Registration Object Descriptor 90 1 Application Identifier 100 1 Short Floating Point 100 2 Long Floating Point 100 3 Extended Floating Point 101 1 Small Packed Binary-Coded Decimal 101 2 Medium Packed Binary-Coded Decimal 101 3 Large Packed Binary-Coded Decimal No object (Cold Restart) 13 129 No object (Delay Measurement) 23 129 110 String Data 01 02 111 String Change Events 06,07,08 07 129 129 00,01 Echo of request Table 1 - Level 3 Implementation Rev 3.0 Page 6 of 6 26-Apr-04

CL-6A DNP3 Device Profile Document

CL-6A DNP3 Device Profile Document

CL-6A DNP3 Device Profile Document

CL-6A DNP3 Device Profile Document 2004 Cooper Power Systems or its affiliates. Cooper Control Interface is a trademark of Cooper Power Systems or its affiliates. 1045 Hickory Street Pewaukee, WI 53072 USA www.cooperpower.com KDL 8/04