BTS300S-BLK DuraVibePro Bluetooth Speaker USER MANUAL
2
Thank you for choosing the Jarv DuraVibe Pro Bluetooth Speaker! Please take the time to read this manual carefully, even if you are already familiar with a similar product. The Jarv DuraVibe Pro Bluetooth Speaker offers a unique blend of power, convenience and features. PACKAGE CONTENTS 1x Jarv DuraVibe Pro Bluetooth Speaker 1x Micro USB Cable 1x 3.5mm Audio Cable 1x Carry strap 1x User Manual 3
SPEAKER CONTROLS AND INDICATOR Power Button Top Volume - / Previous track Multi-Function Button Play/Pause/Answer Call Volume + / Next track LED Light DC IN 5.0V AU X Micro USB Charging port AUX Port Front Left Bottom Handlebar mounting option- ¼ inch 20 mounting pattern (Handlebar mount not included) 4
GETTING STARTED To use your Jarv DuraVibe Pro Bluetooth Speaker, please follow these steps: 1. Charge your Bluetooth speaker fully 2. Pair your Bluetooth Speaker to a Bluetooth-enabled device prior to use. CHARGING YOUR BLUETOOTH SPEAKER Your Jarv DuraVibe Pro Bluetooth Speaker come with a built-in rechargeable battery and a Micro USB charging cable. Charge fully before use. The battery indicator will turn red when charging and turn green once charging is complete. Initial charging time is approximately 3-4 hours. PAIRING YOUR BLUETOOTH SPEAKER In order to use your Jarv DuraVibe Pro Bluetooth Speaker with a Bluetooth-enabled device, you will first need to pair the two. 1. Place the Bluetooth Speaker and the Bluetooth enabled device where they are easily viewable and no more than 3ft. apart. 2. Turn ON your Bluetooth pairing function on your device 3. Turn the speaker on by pressing down the Power button for about 7 seconds. A Blue LED light will start flashing quickly indicating that the speaker is now in Pairing Mode. 4. The speaker will appear as DuraVibe Pro when scanning for available Bluetooth devices within range. 5-Once Pairing is successful a chime will be heard through the speaker 5
RANGE Be sure to keep the speaker within 30 feet (10 meters) of the connected media device at all times for optimal performance. AUX CONNECTOR The speaker also features an AUX audio in port, simply connect the speaker with your non-bluetooth mobile phone/mp3 player/pc/laptop with the 3.5mm jack audio cable. The green indicator light will be on, then you can play music via wired connection. LOW POWER INDICATION The speaker will have voice prompt to remind you to recharge your speaker if your battery capacity is low (at about 10%). BICYCLE MOUNT OPTION Camera / Speaker / Handlebar mount option - ¼ inch 20 mounting pattern 1- Attach mount (not included) to handlebar with Philips screwdriver 2- Attach the speaker to the mounting screw on the mount by turning it clockwise until secure 3- Adjust position of speaker and tighten the adjustment ring (Optional handlebar mount to be used with speaker) 6
CALL MODE Powering ON/ OFF Long press to power on / off. Answering a call Rejecting a call Short Press the button once to accept the call, or answer the call normally via your mobile phone. Short Press again to end the call and resume music Press and hold the button for 2 seconds to reject the incoming call. Ending a call Short Press the button to end the call or end the call directly from your mobile phone. Redialing a call Press and hold the button to redial the last dialed phone number on your mobile phone. Adjusting the Volume Play/Pause Music Previous Track Next Track Disconnect Bluetooth Connection MUSIC MODE Short Press the Volume + to increase volume or Volume to decrease volume. You can also adjust the volume on your handset or device Once connected, Press the button once to play music. Short Press the button to pause music. Press and hold the " -" key to select the next track. Press and hold the "+" key to select the previous track. Press and hold the " - and + button to disconnect current Bluetooth connection
LED INDICATOR GUIDE STATUS INDICATOR Power On Blue Light Charging Red Light Charging complete Green Light Pairing Mode Blue Light flashes for Pairing Aux Mode Green light 8
SPECIFICATIONS Speaker Interfaces Audio input connector: 3.5mm AUX cable: support aux external audio input Charging interface: Micro USB; Input 5V Electrical Specifications Bluetooth 4.1 Bluetooth Range: 33ft. Power: 5W*1 Frequency Range: 160Hz ~ 20Khz Dimensions: 3.75X 3.50 X 1.96 inches Weight: 10.1 oz. Parameters of power Rated voltage: 3.7V DC Battery: Built-in lithium battery, 3.7V/1500mAh Charging Voltage/Current: 5V ± 0.25V / 0.5A Charging time: Up to 4 hours Playing time: Up to 8 hours 9
CARE AND MAINTENANCE 1. Please charge your new speaker for at least 3 hours before first use. 2. To prevent damage and risk of electrical shock, do not expose this device to dust, vibration, rain, water or liquids of any kind. 3. Do not place device in close proximity to open flames or extreme heat sources. Always place your device on level, flat and stable surfaces. 4. Avoid placing items on top of the speaker. 5. Do not use excessive force when pressing buttons or handling your speaker. 6. To clean your speaker, use only a dry, soft cloth or minimally damp cloth without any corrosive solvent or cleaning agent SAFETY To prevent fires, shock or injury, please do not disassemble or replace any parts of this device. In the event that your device may be damaged or in need of repair, please contact a professional maintenance or qualified service center for assistance. We are not responsible for any personal injury or property damage caused by improper use of this product. Please do not allow the use of this device by small children without proper adult supervision. FCC COMPLIANT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 10
WARRANTY At Jarv, we are dedicated to making the best quality product. To back this up, your Jarv DuraVibe Pro Speaker is covered by a One (1) Year Limited Manufacturer s Warranty. Details of the warranty are as follows: for a period of one (1) year from the date of retail purchase, Jarv warrants that this product is free of any defects in manufacturing, materials and workmanship. During the warranty period, we shall, at our sole discretion, repair or replace any defective parts within a reasonable period of time and free of charge. Please visit our website www.jarvmobile.com for more details Or Email us at: customerservice@jarvmobile.com for any questions or concerns about your product. 11