kitsound.co.uk CLASH EVOLUTION BLUETOOTH HEADPHONES WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. For your own safety, please be aware of your surroundings when using these earphones. Not Suitable for Children All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. JB. 4547 / Made in China. KitSound 2015. Christchurch, Dorset, BH23 4FL, UK USER MANUAL
Here at KitSound we believe that to truly connect to your music, you need to experience it through outstanding audio equipment. Our passion for audio is matched with a desire for everyone to experience music as it should be: with exceptional speakers, extraordinary headphones, and audio accessories that really improve every listening encounter. By settling for nothing less than excellence in all that we create, we ensure that only the very best reaches you so that you can be inspired by music, hearing details in long loved tracks that you ve never heard before. KitSound Evolution. Bringing people closer to their music.
Please read this manual carefully before use. Box contents KS Clash Evolution Bluetooth headphones Micro USB charge cable 3.5 mm audio cable Carry case User manual 2 1 3 Functions 1. MFB (Multi Function Button) 2. Volume /Previous track 3. Volume+/Next track 4. Micro USB charge port 5. Aux input 6. Microphone 7. LED indicator 4 5 6 7 4 5
Instructions for use Charging the battery The Clash Evo has a built-in rechargeable lithium battery. Make sure the Clash Evo is switched off. Connect one end of the micro USB charge cable to the micro USB charge port (4) on the Clash Evo and connect the other end to your PC or USB mains adaptor. The battery will start charging. It takes up to 4 hours to fully charge the battery Whilst charging, the LED indicator (7) will be solid red When fully charged, the LED indicator (7) will turn off Getting started To turn the Clash Evo on, press and hold the MFB (1) for 4 seconds To turn the Clash Evo off, press and hold the MFB (1) for 4 seconds whilst they are on LED status Bluetooth setup Pairing a Bluetooth device for the first time With the Clash Evo turned off 1. Press and hold the MFB (1) for 4 seconds 2. The LED indicator (7) will flash blue quickly 3. Activate the Bluetooth feature on your device and search for Bluetooth devices (check your device s manual if you re unsure how to do this) 4. Select KSCLASHEVO from the list of found devices 5. If asked for a passcode, enter 0000 and the Clash Evo will then be connected to your device 6. After pairing successfully, the LED indicator (7) will turn solid blue 7. The next time the Clash Evo is switched on, it will automatically search for and attempt to connect to the last paired device Note: If your device is not connecting automatically, it s because it is not the last paired device. Simply delete KSCLASHEVO from the list of Bluetooth devices on your device and re-pair. LED indicator is: Solid red Off Flashing blue quickly Solid blue Slowly flashing blue Clash Evo is: charging fully charged/switched off/aux mode in pairing mode connected in Bluetooth mode playing in Bluetooth mode 6 7
Re-pairing or pairing new devices 1. Make sure the Bluetooth is disabled on any previously paired devices 2. Follow Pairing a Bluetooth device instructions from step 1 Playing audio wirelessly 1. Follow the instructions in the Pairing a Bluetooth device section 2. Use the controls on your device to select content 3. Audio played through the connected Bluetooth device will now be heard through the headphones 4. To play or pause the selected track, use the controls on your device or press the MFB (1) 5. To skip track, use the controls on your device or press (don t hold) the Previous track button (2) or the Next track button (3) 6. The volume can be adjusted on both your device and the Clash Evo. To change the volume on the Clash Evo, press and hold the Volume button (2) or Volume+ button (3) Note: Track control functions from the buttons on the Clash Evo will require your device to have Bluetooth profile AVRCP. Please check your device s manual if unsure. Using the aux audio input 1. With the Clash Evo turned off, insert the 3.5mm audio cable into the aux input (5) on the Clash Evo 2. Plug the other end of the aux cable into the audio/headphone output on an MP3 player or other audio source 3. Audio played through the connected device will now be heard through the headphones 4. The volume can be adjusted on your device only Note: The controls on the Clash Evo do not operate in aux mode. There is no need to turn the Clash Evo headphones on in aux mode as they will operate like normal wired headphones. PLEASE NOTE: Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have an integrated DAC (Digital Audio Converter). If you turn up the volume to 100%, your device will be sending distorted signals to the Clash Evo. To avoid this and to get the best sound quality from the speaker, we recommend that you do not run your device any higher than 95% volume. 8 9
Call-handling Answer a call When a call comes through, the Clash Evo will play a ringtone. Press the MFB (1) to answer During the call you can decrease/increase the volume by pressing and holding the Volume button (2) or Volume+ button (3) respectively End call During a call, press the MFB (1) to end the call Care for your Clash Evo Please DON T Get the Clash Evo wet Drop the Clash Evo as this will invalidate your warranty Open up the Clash Evo as there are no user serviceable parts inside Expose the Clash Evo to extreme temperatures or rapid changes of hot to cold or vice versa Please DO Clean the Clash Evo with a soft dry cloth and no detergents Specifications Bluetooth V4.0 Bluetooth range Aux input Battery Frequency response Play time Charging time Troubleshooting up to 10 m 3.5 mm Li-Po 380 mah 20 Hz 20 khz up to 10 hours up to 4 hours We hope you ve now got all the information you need to get started, but if you re having problems with anything, please feel free to contact us at: support@kitsound.co.uk Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. 10 11