Xitanium LED driver Datasheet Xitanium LED drivers linear HV non-isolated Enabling future-proof LED technology Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as linear lighting, as well as down lighting and spot/accent lighting. Reliability is enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal de-rating. Most drivers feature central D operation. In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an adjustable output current. pplication-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand. enefits Features pplication High reliability underpinned by 5 year Up to 95 efficiency, lowest cost and smallest 17W, 36W and 75W LED drivers for warranty Future-proof flexibility - dimensions Operating windows - output current can be adjusted office applications 110W and 150W LED drivers for application-oriented operating via the Philips MultiOne configurator (TD drivers) or industry, warehouses, public areas, windows enable LED generation and with a resistor outside the driver distribution centers and shopping complexity management ompatibility - adjustable output current enables operation of various LED solutions from different manufacturers or OEM own designs Flicker and noise free diing with all Touch and DLI LED drivers due to amplitude diing (M) Reduced ripple current and thermal de-rating for increased reliability Multiple versions - DLI diable & prograable, 1-10V diable, and fixed-output; ll T5 form factors but various lengths Longer life time (100khrs), improved surge and burst (4kV) and Tambient (-40 to +60 ) specifications malls
Electrical input data minal input voltage 220...240 Vac performance range minal input frequency 50...60 Hz minal input current 0.17 Input voltage 230 Vac minal input power 39 W Power factor 0.9 Total harmonic distortion 20 @ full load. See graph. Efficiency 90 @230V @ full load minal input voltage D 186...250 Vdc minal input current D 0.17 Input voltage 230 Vdc, full load Input voltage 202...254 Vac Operational range Input frequency 47.5...63 Hz Maximum permissible range Input voltage D 186...250 Vdc Maximum permissible range Isolation Input to Output @230V @ full load @230V @ full load @ full load. See graph. Electrical output data Regulation method onstant urrent Output voltage 50...150 Vdc Output voltage max. 250 V Peak voltage at open load Output current 0.08...0.35 Full output current setting Output current tolerance ±5 Output current ripple LF 4 Output current ripple HF 4 Output power 10...35 W Full output ontrol method Fixed Ripple = peak / average Electrical data controls input Logistical data Product name Order code 871869655585900 Logistic code 12N 9290 015 06406 EN3 8718696555866 Pieces per box 24 2/7
Wiring & onnections Input wire cross-section 0.5...1.5 2 WGO744, solid wire 16...20 WG WGO744, solid wire Input wire strip length 8...9 Output wire cross-section 0.5...1.5 2 WGO744, solid wire 16...20 WG WGO744, solid wire Output wire strip length 8...9 Maximum cable length 1500 Total length of wiring including LED module, one way Dimensions and weight Length (1) 280 Width (1) 30 Height (1) 21 Fixing hole diameter (D1) 4.1 Fixing hole distance (2) 270 Weight 180 gram Operational temperatures and humidity mbient temperature -25...+50 Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 75 Maximum temperature measured at Tcase-point Tcase-life 75 Measured at Tcase-point Maximum housing temperature 110 In case of a failure Relative humidity 10...90 n-condensing mbient temperature -25...+85 Relative humidity 5...95 exceeded. Storage temperature and humidity 3/7 n-condensing
Lifetime Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10 Prograable features Remark Set output current (O) SimpleSet See Design-in guide. Default output current: 80 m LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Remark Features Open load protection Yes utomatic recovering Short circuit protection Yes utomatic recovering Over power protection Yes utomatic recovering Hot wiring Suitable for fixtures with protection class I per IE60598 ertificates and standards pproval marks / E / ENE Ingress Protection classification 20 4/7
Inrush current Inrush current Ipeak 15.1 Input voltage 230V Inrush current Twidth 230 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16 type 33 pcs M Rating Relative number of LED drivers 10 63 13 81 16 100 (stated in datasheet) 20 125 25 156 10 104 13 135 16 170 20 208 25 260 Driver touch current Typical touch current 0.5 m peak cc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv cc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv cc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Surge iunity 5/7
Graphs Operating window Power factor versus output power 6/7
Efficiency versus output power THD versus output power 2016 Philips Lighting.V. ll rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: March 31, 2016 www.philips.com/technology