Xitanium LED driver Datasheet Xitanium Xtreme LED Drivers Diable (1-10V) Independent LED-based light sources are an excellent solution for outdoor environments. They are long-lasting and require low maintenance. However, to get the best out of the LEDs, these light sources require highly reliable and efficient LED Drivers. Philips Xitanium Diable (1-10V) LED Xtreme Drivers for Outdoor and Industry applications are specifically designed to deliver reliable performance and protection while meeting the strict performance, approbation and application requirements. enefits Features Application Reliable Proven robust and reliable electronic driver design Road and Street Lighting Robust design Achieving highest efficiencies based on advanced Tunnel Lighting Long lifetime technology Superior surge protection Long lifetime 5 years warranty Solid surge protection Waterproof performance D operation for industry applications (150W) Proven robustness & reliability secure Suitable for Insulation lass I and lass II luminaires the lowest luminaire maintenance over time Extreme compact size, suitable for a wide range of luminaires Easy to design-in based on good thermal management and extra EMI margin E, ENE, and certified Area and Flood Lighting High-bay lighting
Electrical input data Nominal input voltage 220...240 Vac performance range Nominal input frequency 50...60 Hz Nominal input current 0.36 A @230V @ full load Max. input current 0.41 A @ minimum input voltage A Input voltage 230 Vac Nominal input power 82 W Power factor 0.98 Total harmonic distortion 12 @ full load. See graph. Efficiency 90 @230V @ full load Input voltage A 198...264 Vac Operational range Input frequency A 45...66 Hz Maximum permissible range Isolation Input to Output @230V @ full load @ full load. See graph. Electrical output data Regulation method onstant urrent Output voltage 52...107 Vdc Output voltage max. 160 V Peak voltage at open load Output current 0.7 A Full output current setting Output current min diing 70 ma Output current tolerance ±5 Output current ripple LF 4 Output current ripple HF 15 Output power 3.5...75 W Full output ontrol method 1..10V Diing range 10...100 Ripple = peak / average Electrical data controls input Amplitude diing 1-8V diing curve Logistical data Product name Order code 871869659602900 Logistic code 12N 9290 014 05706 EAN3 Pieces per box 2/8 10
Wiring & onnections Input wire cross-section 0.33...0.75 2 stranded wire 18...22 AWG stranded wire Input wire strip length 7.5...8.5 Output wire cross-section 0.33...0.75 2 stranded wire 18...22 AWG stranded wire Output wire strip length 7.5...8.5 Maximum cable length 2000 Total length of wiring including LED module, one way Insulation Insulation Mains Mains LED 1-10V EQUI asic asic LED 1-10V asic EQUI asic Dimensions and weight Length (A1) 220 Width (1) 68.2 Height (1) 45 Fixing hole diameter (D1) 4 Fixing hole distance (A2) 207 Weight 910 gram 3/8
Operational temperatures and humidity Ambient temperature -40...+55 Higher ambient temperature allowed as long as Tcase-max is not Starting Ambient temperature -40...+55 Tcase-max 80 Maximum temperature measured at Tcase-point Tcase-life 70 Measured at Tcase-point Maximum housing temperature 120 In case of a failure Relative humidity 10...90 Non-condensing Ambient temperature -40...+80 Relative humidity 5...95 Non-condensing Driver lifetime 100,000 hours Measured temperature at Tcase-point is Tcase-life. exceeded. Storage temperature and humidity Lifetime Maximum failures = 10 Prograable features Remark Set output current (AO) No See Design-in guide. Default output current: 700 ma Remark Open load protection Yes Automatic recovering Short circuit protection Yes Automatic recovering Over power protection Yes Automatic recovering Hot wiring No Suitable for fixtures with protection class I and II per IE60598 Over temperature protection driver Yes Automatic recovery Features 4/8
ertificates and standards Approval marks / E / ENE Ingress Protection classification 67 Inrush current Inrush current Ipeak 31 A Input voltage 230V Inrush current Twidth 400 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 11 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current Typical touch current 0.45 ma peak Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 6 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 8 kv Acc. IE61000-4-5. 12 Ohm 1.2/50us,8/20us ontrol surge iunity (diff. mode) 0.5 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us ontrol surge iunity (co. mode) 2.5 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Surge iunity 5/8
Graphs Operating window Iout versus Tcase Pout versus Vmains 6/8
Power factor versus output power Efficiency versus output power THD versus output power 7/8
2016 Philips Lighting.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: June 21, 2016 www.philips.com/technology