DVR3 OEM STYLE HIDDEN FULL HD DVR with WiFi SPECIFICATIONS GENERAL - Display: APP Smartphone Connection (Phone or Navigation Screen) INCLUDED - 3m Hardware Loom with RCA (M) Out - 32GB Micro SD Card - Resolutions: 1920 x 1080p, 1280 x 720p - Chipset: NT 96638 - Recording Angle: 120 - Video Format: H264 Compression MOV - Video Recording Time: 3/5/10 minutes - Recording Mode: Loop, Auto Overwrite - Video Signal: NTSC/PAL - Memory Support: Up to 32GB Micro SD Card (included) - G-Sensor: Yes - Motion Detection: Yes - Wifi: Yes (App to View) - Seamless loop recording: Yes - Auto Record: Yes - After Power On - Time Overlay: Yes - Outputs: RCA (Male) - Power Supply: Hardwire to Vehicle - Operating Temperature: -30 to 65 - Dimensions (Main Body): 65H x 75W x 75D - Cables: 350mm Flylead, 2.7m Extension Cable (Terminates to RCA (M) Power/Ground - Mounting: Mounts around Mirror Bracket (using 2 sided tape) INSTRUCTION MANUAL 1
CONTENTS INSTALLATION NOTES...4,5 KEY FEATURES...5 OPERATING GUIDE...5 PARAMETERS...6 MOBILE APP CONNECTIVITY GUIDE...6, 7 WARRANTY CARD...8 2
TO USERS: Thank you for purchasing this quality mobile digital video recorder. This product uses high-end components and 1080p video to provide a live HD driving record. The product is constructed especially for automobile use. It is compact, lightweight and can be sympathetically hidden during installation. The product does not contain lithium batteries. It provides security, performance, ease of use and peace of mind. The machine uses a high-performance low-light CMOS WXGA HD HD photosensitive chipset and a unique installation design with up to 30 frames per second (fps) HD HD (1920 x 1080) video. Automatic loop recording function avoids worrying about the memory card being full. Playback of the recorded video can be from the micro SD memory card (32GB). Video can be downloaded wirelessly by an app to be viewed on a smartphone or a direct wired link to an in-car monitor is possible. Before using this product, please read this manual and retain for reference. 3
INSTALLATION NOTES 2. Insert TF card in the recorder slot. (Note: Please use a high-speed Micro SD (Class 10 or above) with a capacity of not less than 2MB. A 32GB card is supplied when the unit is purchased. 3. Connect the YELLOW power cable to 12V power supply, RED ACC ignition control, BLACK earth. Insert the YELLOW RCA connector into the optional AV video or navigation input circuit interface of your vehicle (if available). Start the engine. Check that the unit is installed correctly with the red light blinking and the machine starting video recording. Yellow +12V Constant Power Red ACC Ignition Control Black GND Ground Machine Interface - (pay attention to the direction of the slot) Machine Adaptor Cable INSTALLATION NOTES ON/OFF/ENTER In standby mode, hold down this button to shut down. Press momentarily for video is successful. Press again to cancel the connection. 4
KEY FEATURES WiFi/MENU RESET BUTTON If recording or other functions freeze or become unstable, press to restore the factory settings. The machine will then restart. Some settings may be lost. LIGHTS OPERATING GUIDE Use Automatic Record Function Upon starting the vehicle, the recorder will automatically open the recording function automatically saves the recorded contents to the TF card. Once the TF card is full, the recorder will cycle over earlier recorded images. (Note: Logger default is 3 minutes). Use Manual Record Function In standby mode, press the ENTER key. The recorder starts recording after 3 seconds. The recorder will automatically save the recorded image and shut down. COLLISION SENSING This unit has an in-built collision sensor (G-Sensor). When subject to impact or extreme vibration, the recorder will automatically lock the recorded video. Upon replay, the LCD OPEN/CLOSED WIFI FUNCTION phone app connection. (See Mobile APP Connection Guide ). After a successful OFF. Wait 2 seconds for automatic shut down. MENU SETTINGS For standby mode, press WiFi key to enter the menu interface then press down WiFi key to select. Press the ENTER key to make changes. Press WiFi key to exit. 5
PARAMETERS Master chip: Novatek NT96658. Screen: APP smart phone connection/phone screen display/use of car DVD navigation screen. Resolution: 1920 x 1080p, 1280 x 720p. Lens Pixels: 1200W Recording Angle: 170 wide angle. Video Format: H.264 compression MOV. Videos: 3/5/10 minutes (default 3 minutes). Recording Mode: Loop recording, automatically overwrite. Video Resolution: HD, 1080p, 30fps. Video Signal: NTSC/PAL (default NTSC). Microphone: Support (enabled by default). Memory Card: 2-32GB CLASS 10 or more. Power Supply: With ACC ignition start. Battery: No battery, safer, no explosion, time permanent battery, more stable. Language: Multi-language. Gravity Sensor: Triaxial stereo collision acceleration sensor (enabled by default). Seamless Video: Each video seamlessly, do not leak seconds. Time Overlay: Time accurate superimposed on the video. Video Playback: You can directly select the desired fragment playback. Temperature Range: -35 C - 75 C. APP PHONE CONNECTION AND OPERATION GUIDE 1. Download and install APP either the Android system application or Apple systems App Store. Download FinalCam Application and Installation. (app scan code shown below). Android App iphone App Figure 2 - QR Codes 6
MOBILE APP CONNECTIVITY GUIDE 3. Click to ensure that the APP is installed. Then click the top right corner of the ten add button (Figure 3). for your machine MAC address). 5. Enter the initial password: 12345678 and establish the connection (see Figure 4). Figure 3. Add Device Figure 4. Connected Devices 6. After a successful connection, directly access the unit and related screen operations shown in Figure 5. Functions are as follows: Figure 5. App Key Functions 7
DVR3 JS007WQK 8