PLC HMI ALL IN ONE. Powerful Software Outstanding Support Complete Range of PLCs

ALL IN ONE Powerful Software Outstanding Support Complete Range of s

Table of Contents Page UniStream Series Industry.0- Unitronics Solution... UniStream Modular & Built-in...6 UniLogic - All-in-One Softwares... UniStream Modular Feature...0 UniStream Built-in Features... I/O Expansion...5 Powerful Software Outstanding Support Complete Range of s Vision Series VisiLogic All-in-One Software...6 Software Utilities...7 Single, intuitive, feature-rich programming environment & utilities suite Expert support without fees or tiers A range of product lines to match your exact requirements Vision 0 / 00... Vision 700...0 Vision 570 / 560... Unitronics provides a powerful solution; our software is more than a match for any requirement. Hardware configuration, design and communications are all programmed in an single, intuitive software environment, which includes a extensive utilities suite with DataExport, Remote Access and more. This all-in-one approach reduces the time and effort needed to program a unit. Not only is our software user-friendly, all of Unitronics software and utilities are provided at no extra cost. The support, both via telephone, email and the Unitronics forum, is among the best in the industry says Jose Padro, President of Alpha Systems, Inc. Unitronics offers best-of-breed technical support to every user without added fees, tiers, or hoops to jump through. Every question we receive is answered by an experienced member of our support team. The same team of experts is available at every step of the project for continuous coverage. With 5 years of experience in automation, Unitronics has established several lines with options to meet a diverse range of requirements. Our R&D strategy is to stay close to the market; we listen to our customer s current needs and future plans and develop new solutions accordingly. This strategy enables us to offer simple, tried-and-true solutions alongside cutting edge innovations. Samba Series Jazz Series Vision 0... Vision 50...6 Vision 0... Samba...0 Jazz... I/O Expansion Modules & Accessories Vision Series... Snap-in I/O Modules...5 About Unitronics ALL IN ONE

Enter the world of Industry.0 with Unitronics Bridge the gap between OT and IT with + IT NEW! FTP SNMP EMAIL SQL MQTT Remote Access OT Ethernet SCADA WEBSERVER VNC GSM/GPRS Modem RS USB I/O Expansion Ethernet CANbus RS5/ Expandable up to,0 I/Os CANopen SAE J99 UniCAN FB PROTOCOL MODBUS RTU EtherNet/IP MODBUS TCP FB Protocol CANopen Slaves J99 Devices Remote High Speed I/O MODBUS RTU Slaves Ethernet IP (scanner & adaptor) MODBUS IP Slaves ProfiBus ProfiBus Slave Barcode Printer Barcode Reader BACnet, KNX, M-bus Via rd -party gateway Open Protocol Remote I/O - up to modules per remote I/O 5

The Powerful award winning mable Logic Controllers Series UniStream Built-in For high-end automation projects, available in two All-in-One series: UniStream Modular and UniStream Built-in. UniStream Modular Space-saving that delivers the functionality to control complex machines A multi-function in a superbly compact hardware profile: ++I/O built into a single unit and in a range of built-in I/O configurations. Available in two versions: 5" and 5" Pro. Samba TM Series Vision TM Series UniStream Series Complete custom control solution, perfectly matched to your requirements Its unique design enables you to create a custom control solution in three steps: select an panel, snap in a CPU, and add any I/O or communication modules necessary for your specific application. Integrate third-party devices via EtherNet/IP, CANbus or RS/5 using MODBUS or CANopen. Use the UniLogic Message Composer to adapt UniStream to any protocol. Audio Out MicroSD card Mini USB (ming) Ethernet TCP/IP USB (Host) MicroSD card Jazz Series x USB (Host) Mini USB (ming) x Ethernet TCP/IP (for daisy-chaining) CANbus RS5 6 CPU Slim I/O Wide I/O COM module CANbus RS5 RS I/O Expansion Adaptor 7

UniLogic - UniStream All-in-One ming Software Ultimate All-in-One programming environment: configure hardware, communications, program Ladder, design, web pages and more. Design Beautiful Displays - Stream Video, Audio, PDF UniLogic s extensive free graphics library and widgets enable you to be a graphic artist. The simple editor supports layers, image transparency, overlap, and rotation. The Toolbox offers drag & drop widgets: Video and Audio players, Data Tables, complex Trend graphs and gauges for the display of run-time values, and more. New Custom Controls: design controls, store in Library - reuse anywhere! Build-it-Once, then Reuse - the Ultimate Time Saver Add your UDFBs, screens, Custom Controls, and Web Pages to the Library. Then, drag & drop them where you need them - UniLogic takes care of the tags. You can import your Library into any project, and share it with others. Build-it-Once... Reuse Library: Functions, & Webpages Context-sensitive... Toolbox for Ladder, & Web Elements Languages - from Italian to Chinese at the Touch of a Button UniLogic supports any language that you can type - including Asian languages such as Chinese, Japanese, and Korean. You simply enter translated text into the Language Table Translation. Instantly switch language via user actions or program events. Power from C... Structs & C Functions MQTT Via MQTT, UniStream bridges between the production floor all the way up to the MES. Supports MQTT as a 'client' that can both publish and subscribe to messages. Structs - Tag Database on Steroids You create Structs - groups of data tags of different types organized into a single, logical unit - and reuse them across programs, especially with UDFBs (User Defined Function Blocks). UniLogic s built-in Structs enable you to configure and control hardware and complex functions such as s and PID. Speed Ladder ming - plus C Power Build your Ladder: drag & drop elements that snap into place, error-free. Use the built-in C Function editor to write C functions. UniLogic means you write-it-once : create code to use, reuse, and export across projects. Create UDFBs (User Defined Function Blocks) - self-contained functions for tasks such as oven control. Power Data Tools - Data Sampler, Data Tables, Recipes, SQL Data Samplers record dynamic application data, such as output values, at fixed intervals into files and display it as Trend graphs on the. Data Tables organize and manipulate data via Ladder, create data logs, implement Recipes, import/export values from/to Excel, allow users to enter/edit data into Data Tables via panel, and more. NEW SQL Connector: Access SQL databases, run Queries, connect Data Tables to SQL. Web Server: Web Pages No HMTL Required Design elegant web pages via a drag & drop interface, identical to the editor. A rich graphic library is at your disposal. The Web toolbox offers user controls and widgets, enabling the end user to view and enter application data via any web browser. Built-in Alarms - Easily Boost Application Safety Compliant with ISA. standard guidelines for Alarm Management systems in the process industries. Intuitive features allow operators to detect Alarms, analyze them, and take action. Export your Alarm Log via FTP, send it via email, or copy it directly from the controller via a DOK. Alarms feature full multi-language support. s - Configuration not ming Incredibly fast, easy to configure and implement, UniStream data communications run independently of Ladder. A single can contain multiple slave definitionsand multiple master definitions. Communicate with any device: plug-and-play protocols such as MODBUS, CANopen, SNMP, MQTT,and EtherNet/IP. Use Message Composer for data communications with devices such as frequency converters and bar-code readers via any Ethernet, CANbus or serial rd -party protocol. Also supports CANLayer, FTP Client/Server, SMS, email, GSM/GPRS modem. 9

Jazz Series Samba TM Series Vision TM Series UniStream Series Features: Modular Size: 7, 0. or 5.6 High quality touch screen, 6K. UniStream 0. available in Multi-Touch Multi-language display Built-in Alarm Screens Media support: Video, Audio and PDF viewer Multi-level password protection easy and fast I/O options include digital, analog, high speed, temperature, and weight measurement Expand up to 0 I/Os Auto-tune PID, up to 6 independent loops Recipes & data logging via data tables & sampling MicroSD card - log, backup, clone & more Function Blocks & Structs CANbus port Ethernet TCP/IP ports RS5 USB host ports Mini USB for programming steps to an All-in-One controller: select panel, add the powerful CPU, and snap on any I/O and COM modules. Expands up to 0 I/Os. UniStream 7" Available in Multi-Touch UniStream 7 UniStream 0. UniStream 5.6 Article Number USC-P-B0 USP-070-B0/ USP-070-B0 USC-P-B0 USP-0-B0/USP-0-M0 USC-P-B0 USP-56-B0 Total supported I/Os 0 (See I/O Expansion Modules- page 5) Onboard I/O modules Fit up to slim or wide I/Os Fit up to 5 slim or wide I/Os I/O Expansion Add Local I/O via expansion port Add Remote I/Os via CANbus Local I/O Expansion Use Local Expansion Adapters to add up to 0 slim or 50 wide modules Remote I/O Expansion Use EX-RC adapters to add I/Os via CANbus Onboard COM modules Supports up to COM modules Supports up to COM modules Application Memory M Ladder Memory MB Panel Touch screen Resistive, Analog Resistive, Analog / Multi-Touch Resistive, Analog Viewing Area Height x Width (mm) Cut Out Height x Width (mm) USP-070-B0: 5. x 9. USP-070-B0: 5.0 x 5.9. x 5.. x 9.5.0 x 96.0.0 x.0 9.0 x 95.0 Resolution 00 x 0 (WVGA) 00 x 600 (SVGA) 66 x 76 Keys Virtual Keyboard Protection IP66, IP65 and NEMAX when panel-mounted Operating Temperature -0 C to 55 C 0 C to 50 C Standard UL, CE, Class Div and GOST certificate years typical at 5 C, battery back-up for memory and RTC Power Supply /VDC Add-on ports: Up to RS (Using UAC-0RS) Up to RS + RS5 (Using UAC-0RSC) MQTT Client EtherNet/IP MODBUS: Serial & TCP/IP CANopen, CANlayer, UniCAN SNMP BACnet, KNX and M-Bus via gateway Message Composer for rd party protocols UniStream 0." Local Expansion Adapters UAG-XK5 Short Range Kit, 5 cm UAG-XKP5 Short Range + embedded Power Supply Kit, 5 cm UAG-XK00 Short Range Kit, 00 cm UAG-XKP00 Short Range Kit + embedded Power Supply, 00 cm UAG-XKPLXXXX Long Range + embedded Power Supply, lengths: 600, 00, 500, 000, 000cm Uni-COM Modules UAC-0RS x RS UAC-0RS UAC-0RSC x RS x RS port and x RS5 port SQL Client Web Server FTP server & client E-mail & SMS Remote access via VNC G Modem support 0 UniStream 5.6" Onboard Modules, I/O and COM: the total number of modules, both I/O and COM that you can snap onboard an panel is limited by the size of the panel. I/O modules are "Slim" &" Wide". Wide I/O module =.5 Slim or COM module. EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m. UniStream complies with IP66 and NEMAX only if audio-jack seal is installed. Refer to panel installation guide. V applies to power supply only, and not to the digital inputs. These require V.

Jazz Series Samba TM Series Vision TM Series UniStream Series Features: Size: 5" High quality touchscreen, 6K Multi-language display Built-in Alarm Screens Media support: Video*, Audio* and PDF viewer Multi-level password protection easy and fast I/O options include digital, analog, high speed, temperature, and weight measurement Expand up to 0 I/Os Auto-tune PID, up to 6 independent loops Recipes & data logging via data tables & sampling MicroSD card - log, backup, clone & more Function Blocks & Structs Ethernet TCP/IP USB host port Mini USB for programming Built-in Powerful in a superbly compact hardware profile: ++I/Os built into one single unit. Available in two versions: 5" and 5" Pro. Expands up to 0 I/Os. UniStream 5" Total supported I/Os 0 Built-In I/O Expansion According to model (See Built-in I/O Modules - page ) Add Local I/O via expansion port Add Remote I/Os via CANbus. (See Unistream 5" I/O Expansion Modules- page 5) Local I/O Expansion Use Local Expansion Adapters to add up to 0 slim, or 50 wide modules Remote I/O Expansion Use EX-RC adapters to add I/Os via CANbus COM Modules Add up COM modules Application Memory Ladder Memory Panel Touch screen Viewing Area Height x Width (mm) Cut Out Height x Width (mm) Resolution Height x Width (mm) Keys Protection M MB Resistive, Analog 0 x 6. 9. x. 00 x 0 (WVGA) Virtual Keyboard IP66, IP65 and NEMAX Add-on ports: Operating Temperature -0 C to 55 C CANbus RS5 RS Standard CE MQTT Client EtherNet/IP MODBUS TCP CANopen, CANlayer, UniCAN SNMP BACnet, KNX and M-Bus via gateway Message Composer for rd party protocols SQL Client* Web Server* E-mail & SMS Remote access via VNC FTP server & client G Modem support * Pro version only Power Supply Uni-COM Modules Article Number Ports UAC-CX-0RS Uni-COM: x RS port UAC-CX-0RS Uni-COM: x RS5 port UAC-CX-0CAN Uni-COM: x CANbus port years typical at 5 C, battery back-up for memory and RTC /VDC We have found Unitronics to be one of those companies which inspire you to push the boundaries. David Graham UniStream 5" I/O Expansion: the first unit plugged into the I/O expansion jack must be from the CX series I/O expansion - UAG-CX-XKP5 or UAG-CX-XKP00. The CX end unit may be followed by Uni-I/O modules or UAG-XKPLxxxx adapters. EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m. Refer to website for more information. Up to serial modules and one CAN bus module.

UniStream 5" Built-in I/Os Expandability Modular, Built-in, Local & Remote I/Os Local & remote I/O modules for UniStream series. Expand up to 0 I/Os. Jazz Series Samba TM Series Vision TM Series UniStream Series US5-B5-B US5-B0-B US5-B5-TR US5-B0-TR US5-B5-T US5-B0-T US5-B5-RA US5-B0-RA US5-B5-TA0 US5-B0-TA0 Summary No built-in I/Os 0 Digital inputs, Analog Inputs, Transistor outputs,, including PWM outputs. Relay outputs 0 Digital inputs, Analog Inputs, Transistor outputs,, including PWM outputs Digital inputs, including HSC, Analog Inputs, Temperature inputs, Relay outputs, Analog outputs Digita inputs, including HSC, Analog inputs, Temperature inputs, 0 Transistor outputs,, including PWM outputs, Analog outputs Digital (Isolated) Inputs Operating HSC/Shaftencoder Analog Temperature inputs, RTD/TC Transistor (Isolated) PWM Relay Analog Voltage - - - - - - - - /VDC 0 Sink/ Source 0 Sink/ Source Sink/ Source Sink/ Source - - 90kHz -bit 90kHz -bit 0-0V, 0-0mA, -0mA -bit 0-0V, 0-0mA, -0mA -bit (isolated) 0-0V, 0-0mA, -0mA -bit (isolated) 0-0V, 0-0mA, -0mA -bit - - (isolated) Thermocouple, PT00/NI00/ NI0/ PT000/NI000 (isolated) Thermocouple, PT00/NI00/ NI0/ PT000/NI000 Sink () Source () 0kHz khz - - 0 Source () khz - VDC - - VDC - 0-0V, -bit, ±0V, -bit+sign 0-0mA, -0mA -bit 0-0V -bit, ±0V -bit+sign 0-0mA, -0mA -bit VDC VDC Digital Analog and Temperature Articles Number Digital (Isolated) UID-600 6 Sink/Source UID-00T Sink/Source 6 UID-W66T Sink/Source UID-00THS Sink/Source HSC/Shaftencoder Inputs Analog Temperature Measurement Transistor 5 (Isolated) PWM/ HSO 5 Relay Analog 50kHz -bit Source() 6 Source() Source() 50kHz khz UID-006T 6 Source() UID-00R Sink/Source 6 UID-W66R Sink/Source 6 UID-006R 6 6 0-0V -bit UIA-0006 ±0V -bit+sign 0-0mA, -0mA -bit UIA-00N UIA-000N 0-0V, 0-0mA, -0mA -bit 0-0V, 0-0mA, -0mA -bit 0-0V -bit ±0V -bit+sign 0-0mA, -0mA -bit US5-B5-R US5-B0-R Digital inputs, including HSC, relay outputs Sink/ Source 90kHz -bit 0-0V, 0-0mA, -0mA -bit - - - - VDC UIS-0PTN UIS-0PTKN UIS-0TC PT00/NI00/NI0 PT000/NI000/NI00 Thermocouple US5-B5-T US5-B0-T Digital inputs, including HSC, Analog inputs, 6 Transistor outputs,, including PWM outputs Sink/ Source 90kHz -bit Note that the high-speed inputs are included in the total number of digital inputs. Note that the PWM outputs are included in the total number of transistor outputs. 0-0V, 0-0mA, -0mA -bit - 6 Source () khz - - VDC Digital/Analog UIS-WCB, 0 Sink/Source UIS-WCB, 0 Sink/Source 0kHz bit 0kHz bit (Isolated) 0-0V, 0-0mA, -0mA -bit (Isolated) 0-0V, 0-0mA, -0mA -bit (Isolated) Thermocouple, PT00/NI00/NI0 (Isolated) Thermocouple, PT00/NI00/NI0 6 Sink () Source () 6 Sink() 50kHz 50kHz (Sink outputs only) 0-0V -bit ±0V -bit+sign 0-0mA, -0mA -bit 0-0V -bit ±0V -bit+sign 0-0mA,-0mA -bit This module utilizes two high speed blocks that can each be assigned either to the inputs or to the outputs. outputs are high-speed, up to 50KHz: function as normal or high-speed PWM (same freq. and different duty-cycles). outputs are normal speed: function as normal-speed PWM outputs (same freq. and same duty cycle). Width: wide I/O module =.5 slim I/O modules Note that the high-speed inputs are included in the total number of digital inputs. 5 Note that the high-speed outputs are included in the total number of digital outputs. 6 Not isolated DIN Rail Power Supplies UAP-VW W V A UAP-V60W 60W V.5A UAP-V96W 96W V A Modems GSM-KIT-7J-G Cinterion GPRS modem, EHS6T, G 5

VisiLogic - Vision and Samba All-in-One programming software A single, intuitive environment for all your application needs Smart Utilities Remote Access, Efficient Data Management, and more Utility Name Function Key Features Targeted Users Remote Access View and control a directly from PC, via local or remote connection View an panel: use the PC keyboard + mouse to run the application Operand and Data Table values: view values during runtime, import and export values to/ from Excel/.csv files Operators requiring Remote Access System integrators: remote debugging, troubleshooting, fault-finding Hardware Configuration Intuitive set up: controller, I/Os, and COM channels Remote Operator DataXport Simultaneously view and operate the panels of multiple s in multiple locations Create Data Logs from Data Tables and operand values in s Easily place panels side-by-side to monitor distributed systems or applications in several locations Run the applications via PC keyboard + mouse Harvest data from multiple s on demand or according to time/date Export the data to ± Excel/.csv files Automatically email files Control room operators Installation managers Data analysts Plant managers Process engineers Ladder ming Rapidly drag & drop elements and Function Blocks UniDownload Designer Create compressed VisiLogic / U90Ladder applications(.udc files) for secure installation in local or remote s Prevent end-users from uploading and opening the application Include an OS to be installed at download Set a download channel, restrict end-user actions after installation and more OEMs / System Integrators can: Protect source code Enable customers to install an application without using VisiLogic or U90Ladder Application Create beautiful displays includes rich image library Download Manager & UniDownloader Securely install.udc applications in local or remote s Download Manager: installs the same application in multiple s UniDownloader: installs an application in a single OEMs / System Integrators in installations with high security requirements SD Card Suite Remotely access and manage SD cards and their data Browse a remote s SD card Read/write data, including Data Table files View SD card contents - Trends, logs, alarm history, data tables - export to Excel Data analysts Plant managers Process engineers Alarms: Built-in Screens Effectively alert staff via Alarm screens UniVision Licensing Safeguard your application security Embeds unique licenses in the, which enables application to run only on a licensed Option to activate or deactivate different sections of your application System integrators OEMs Prevents theft of applications Languages - String Library Instantly switch language via screen touch Trend Graphs Display dynamic values in real time UniOPC Server Exchange data between Unitronics s and OPC-supported software Create channel to connect s to SCADA systems, such as plant control rooms Compliant with the OPC foundation standards Control room operators UniDDE Exchange data with Windows based applications Enables data exchange between Unitronics s and software that supports Microsoft s Dynamic Data Exchange protocols, like Excel Control rooms operators Data Tables Create logs, import/export data, implement recipes Web Server Display and edit application values via browser ming tools for developers Easily implement communication between & PC applications Using ActiveX &.NET communication drivers Developers Software features vary according to controller model 6 7

Jazz Series Samba TM Series Vision TM Series UniStream Series Features: Size:." and 0." High quality touchscreen, 6K Multi-language display Built-in Alarm Screens Web server E-mail & SMS Remote access utilities G Modem support 0 /00 I/O options including digital, analog, high speed, temperature, and weight measurement Expand up to 000 I/Os Auto-tune PID, up to independent loops Recipe programs and data logging via data tables MicroSD card - log, backup, clone & more Function Blocks Ethernet TCP/IP Mini USB for programming CANbus RS5/ RS port may be added for an additional serial/ethernet MODBUS TCP SNMP* CANopen, CANlayer, UniCAN BACnet, KNX and M-Bus via gateway FB Protocol: message Composer for rd party protocols V0 Flat Panel * SNMP V Trap, SNMP community Name V00 Classic Panel Advanced from the back-big, high-resolution color touch screen from the front. Snap in I/Os for an All-in-One solutions, expand up to 000 I/Os. Vision 00 Vision 0 Article Number V00-T0B V0-T0BJ Total supported I/Os 000 I/O Expansion Local I/O Expansion Local or Remote I/Os may be added via expansion port or via CANbus. (See I/O Expansion Modules- page ). Use Local Expansion Adapters to add up to modules Remote I/O Expansion Use EX-RC adapters to further extend the number of I/Os Application Memory Scan Time Memory Operands Panel Touch screen Cut Out Height x Width (mm) Resolution Application Logic: MB Images: 0MB Fonts: MB 9μsec per K of typical application 9 coils, 096 registers, 5 long integers ( bit), 56 double words ( bit unsigned), 6 floats, timers (_bit), _counters Additional non-retainable operands: 0 X-bits, 5 X-integers, 56 X-long integers, 6 X-double words Resistive, Analog 0 x 7.5 x 97 00 x 600 (SVGA) Keys 9 programmable function keys Virtual Keyboard Protection IP65 / NEMAX IP66, IP65 and NEMAX Operating Temperature 0 to 50ºC Standards Power Supply Snap-in I/O Plug a Snap-in module directly into the back of a Vision. Compatible with all V560, V570, V700, V00 and V0. CE, UL Many of our products are also UL Class Div and GOST certified - please contact Unitronics 7 years typical at 5 C, battery back-up for all memory sections and RTC /VDC I ve not yet encountered a job that a Unitronics was unable to cover. Timothy Moulder, Engineer at Black & Decker 9 EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m.

Samba TM Series Vision TM Series UniStream Series Features: 700 Size: 7" High quality touchscreen, 6K Multi-language display Built-in Alarm Screens I/O options including digital, analog, high speed, temperature, and weight measurement Expand up to 000 I/Os Auto-tune PID, up to independent loops Recipe programs and data logging via data tables MicroSD card - log, backup, clone & more Function Blocks Advanced from the backhigh-resolution color 7" touch-screen from the front, expand up to 000 I/Os. Reliability, ease of use, connectivity and competitive prices are Unitronics main strengths. Mr. Andrea Della Bosca, EV srl Total supported I/Os 000 I/O Expansion Local I/O Expansion Local or Remote I/Os may be added via expansion port or via CANbus. (See I/O Expansion Modules- page ). Use Local Expansion Adapters to add up to modules Remote I/O Expansion Use EX-RC adapters to further extend the number of I/Os Application Memory Scan Time Memory Operands Panel Touch screen Application Logic: MB Images: 0MB Fonts: MB 9μsec per K of typical application 9 coils, 096 registers, 5 long integers (-bit), 56 double words (-bit unsigned), 6 floats, timers (-bit), counters. Additional non-retainable operands: 0 X-bits, 5 X-integers, 56 X-long integers, 6 X-double words Resistive, Analog Jazz Series Ethernet TCP/IP Mini USB for programming CANbus RS5 RS V700 Cut Out Height x Width (mm) Resolution Keys Protection 5 x 9 00 x 00 (SVGA) Virtual Keyboard IP66, IP65 and NEMAX MODBUS TCP SNMP* Remote access utilities CANopen, CANlayer, UniCAN BACnet, KNX and M-Bus via gateway FB Protocol: message Composer for rd party protocols Operating Temperature Standards Power Supply 0 to 50º C CE, UL Many of our products are also UL Class Div and GOST certified - please contact Unitronics 7 years typical at 5 C, battery back-up for all memory sections and RTC /VDC Web server E-mail & SMS G Modem support * SNMP V Trap, SNMP community Name 0 EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m.

Features: 570 /560 Advanced from the back- big, highresolution color 5.7" touchscreen from the front. Snap-in I/Os for an All-in-One solution, expands up to 000 I/Os. For a first time user, I had a great experience. I look forward to incorporating this brand of product on future jobs. Jeremy Charles Keene, Controls Manager at Broach Company Size: 5.7" High quality touchscreen, 6K UniStream Series Multi-language display Built-in Alarm Screens I/O options including digital, analog, high speed, temperature, and weight measurement Vision 570 Vision 560 Article Number V570-57-T0B-J V560-T5B Total supported I/Os 000 Vision TM Series Expand up to 000 I/Os Auto-tune PID, up to independent loops Recipe programs and data logging via data tables I/O Expansion Local I/O Expansion Local or Remote I/Os may be added via expansion port or via CANbus. (See I/O Expansion Modules- page ). Use Local Expansion Adapters to add up to modules Samba TM Series MicroSD/ SD card log, backup, clone & more Function Blocks V570-J Flat Panel Remote I/O Expansion Use EX-RC adapters to further extend the number of I/Os Application Memory Scan Time Application Logic: MB Images: 0MB Fonts: MB 9μsec per K of typical application Jazz Series Ethernet TCP/IP Mini USB for programming Memory Operands Panel 9 coils, 096 registers, 5 long integers (-bit), 56 double words (-bit unsigned), 6 floats, timers (-bit), counters. Additional non-retainable operands: 0 X-bits, 5 X-integers, 56 X-long integers, 6 X-double words CANbus RS5 RS Touch screen Cut Out Height x Width (mm) Resistive, Analog.5 x 6.0 x 09 port may be added for an additional serial/ethernet Resolution 0 x 0 (QVGA) Keys Virtual Keyboard programmable keys Labeling options function keys or customized MODBUS TCP SNMP* Remote access utilities Protection NEMAX, IP66, IP65 (when panel mounted) NEMAX, IP65 (when panel mounted) CANopen, CANlayer, UniCAN Operating Temperature 0 to 50ºC BACnet, KNX and M-Bus via gateway FB Protocol: message Composer for rd party protocols Standards CE, UL Many of our products are also UL Class Div and GOST certified - please contact Unitronics 7 years typical at 5 C, battery back-up for all memory sections and RTC Web server E-mail & SMS G Modem support Power Supply /VDC * SNMP V Trap, SNMP community Name V560 EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m.

UniStream Series Vision TM Series Samba TM Series Jazz Series Features: 0 Size:." High quality touchscreen, 6K Multi-language display Built-in Alarm Screens I/O options including digital, analog, high speed, temperature, and weight measurement Expand up to 5 I/Os Auto-tune PID, up to independent loops Recipe programs and data logging via data tables Micro SD card - log, backup, clone & more Function Blocks Ethernet TCP/IP Mini USB for programming CANbus RS5 RS ports may be added: Serial/Ethernet/Profibus and CANbus MODBUS TCP SNMP* Remote access utilities CANopen, CANlayer, UniCAN BACnet, KNX and M-Bus via gateway FB Protocol: message Composer for rd party protocols Web server E-mail & SMS G Modem support * SNMP V Trap, SNMP community Name Advanced integrated with a." wide-aspect color touch screen. Includes built-in I/O configuration, expand up to 5 I/Os. V0 The huge advantage of this was that - with everything built-in_the communications and use of tags in the was so simple and intuitive. Ashley Parr, Total supported I/Os 5 Built-in According to model (See Built-in I/O Modules below) I/O Expansion Add Local I/O via expansion port Add Remote I/Os via CANbus (See I/O Expansion Modules- page ) Local I/O Expansion Use Local Expansion Adapters to add up to modules Remote I/O Expansion Use EX-RC adapters to further extend the number of I/Os Application Memory Application Logic: MB Images: MB Fonts: 5KB Scan Time 5μ sec per K of typical application Memory Operands 9 coils, 096 registers, 5 long integers (-bit), 56 double words (-bit unsigned), 6 floats, timers (-bit), counters Additional non-retainable operands: 0 X-bits, 5 X-integers, 56 X-long integers, 6 X-double words Panel Touch screen Resistive, Analog Cut Out Height x Width (mm) 0 x 7 Resolution Virtual Keyboard Keys 5 programmable Protection NEMAX, IP66, IP65 (when panel mounted) Operating Temperature 0 to 50ºC Standards CE, UL Many of our products are also UL Class Div and GOST certified - please contact Unitronics Power Supply Vision0 models - Built-in I/Os 7 years typical at 5 C, battery back-up for all memory sections and RTC VDC, except for V0-J-B, which is /VDC EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m. In some models certain inputs are adaptable via Each high-speed requires or pins according Example: V0-J-RA offers digital The total number of digital inputs listed includes HPS wiring and software settings, and can function as to high-speed mode. inputs. Implementing TC inputs requires high-speed and adaptable inputs. digital,high-speed, analog, and in certain models Each analog input requires pin. pins, leaving pins free. Implementing The total number of digital outputs listed 5 Article Summary as TC or PT00. Adapting requires input pins. This reduces the number of digital inputs. Pin requirements: Digital HSC/Shaft-encoder Each TC requires pins per TC input The first PT input requires pins and two additional pins for each additional PT input. Inputs Analog PT inputs uses 5 input pins. Temperature Measurement includes high-speed outputs. Transistor PWM/HSO Relay Analog V0-J-B No onboard I/Os /VDC V0-J-RH V0-J-R V0-J-TR V0-J-RH6 V0-J-RA V0-J-TRA V0-J-T V0-J-T V0-J-TA 0 Digital, D/A Inputs 6 Relay 0 Digital, D/A Inputs Relay 0 Digital, D/A Inputs Relay, High-speed Transistor 6 Digital, D/A Analog Inputs 6 Relay Digital, D/A, TC/PT00/ Digital Inputs Relay, Analog Digital, D/A, TC/PT00/ Digital Inputs Relay, Analog, High- Speed Transistor 0 Digital, D/A Inputs Transistor 0 Digital, D/A Inputs 6 Transistor Digital, D/A, TC/PT00/ Digital Inputs 0 Transistor, Analog 00kHz, -bit 0kHz, -bit 00kHz, -bit 00kHz, -bit 0kHz, -bit 00kHz, -bit 0kHz, -bit 0kHz, -bit 0kHz, -bit 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA and 0-0mA, -0mA 0-0V, 0-0mA, -0mA -bit 0-0V, 0-0mA, -0mA -bit 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA -bit Operating Voltage 6 VDC VDC ( PTO) 00 khz max VDC 6 VDC Thermocouple, PT00 Thermocouple, PT00 Thermocouple, PT00 6 0 ( PTO) 00 khz max 7 7 5 0-0V, -0mA -bit 0-0V, -0mA -bit VDC VDC VDC VDC 0-0V, -0mA -bit VDC

Jazz Series Samba TM Series Vision TM Series UniStream Series Features: 50 Size:.5" High quality touchscreen, 6K Multi-language display Built-in Alarm Screens I/O options including digital, analog, high speed, temperature, and weight measurement Expand up to 5 I/Os Auto-tune PID, up to independent loops Recipe programs and data logging via data tables Micro SD card - log, backup, clone & more Function Blocks Ethernet TCP/IP Mini USB for programming CANbus RS5 RS ports may be added: Serial/Ethernet/Profibus and CANbus Palm-sized All-in-One: advanced with a.5" color touchscreen. Includes built-in I/O configuration, expands up to 5 I/Os. V50-J Flat Panel Total supported I/Os 5 Built-in According to model (See Built-in I/O Modules below) I/O Expansion Add Local I/O via expansion port Add Remote I/Os via CANbus. (See I/O Expansion Modules- page ) Local I/O Expansion Use Local Expansion Adapters to add up to modules Remote I/O Expansion Use EX-RC adapters to further extend the number of I/Os Application Memory Application Logic: MB Images: MB Fonts: 5KB Scan Time 5μ sec per K of typical application Memory Operands 9 coils, 096 registers, 5 long integers (-bit), 56 double words (-bit unsigned), 6 floats, timers (-bit), counters Additional non-retainable operands: 0 X-bits, 5 X-integers, 56 X-long integers, 6 X-double words Panel Touch screen Resistive, Analog Cut Out Height x Width (mm) 9 x 9 Resolution 0 x 0 (QVGA) Keys 5 programmable keys. Labeling options - function keys, arrows, or customized Protection NEMAX, IP66, IP65 (when panel mounted) Operating Temperature 0 C to 50 C, For V50-JS-TA & V50-S-TA: -0 C to 60 C Standards Power Supply Vision50 models - Built-in I/Os Article Summary Digital HSC/Shaftencoder CE, UL Many of our products are also UL Class Div and GOST certified - please contact Unitronics 7 years typical at 5 C, battery back-up for all memory sections and RTC VDC, except for V50-J-B, which is /VDC EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m. Inputs Analog Temperature Measurement Transistor PWM/HSO Relay Analog V50-J-B V50-5-B No onboard I/Os /VDC V50-J-TR0 V50-J-R V50-5-TR0 V50-5-R 0 Digital, D/A Inputs 6 Relay High-speed Transistor 0 Digital, D/A Inputs Relay 00kHz, -bit 0kHz, -bit 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA ( PTO) 00 khz max Operating Voltage 6 VDC VDC MODBUS TCP SNMP* Remote access utilities CANopen, UniCAN, CANlayer BACnet, KNX and M-Bus via gateway FB Protocol: message Composer for rd party protocols V50-J-TR V50-J-TR6 V50-5-TR V50-5-TR6 0 Digital, D/A Inputs Relay, High-speed Transistor 6 Digital, D/A Analog Inputs 6 Relay High-speed Transistor 00kHz, -bit 00kHz, -bit 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA and 0-0mA, -0mA ( PTO) 00 khz max ( PTO) 00 khz max VDC 6 VDC Web server E-mail & SMS G Modem support V50-J-RA V50-J-TRA V50-5-RA V50-5-TRA Digital, D/A, TC/PT00/ Digital Inputs Relay, Analog Digital, D/A, TC/PT00/ Digital Inputs Relay, Analog, High- Speed Transistor 0kHz, -bit 00kHz, -bit 0-0V, 0-0mA, -0mA -bit 0-0V, 0-0mA, -0mA -bit Thermocouple, PT00 Thermocouple, PT00 ( PTO) 00 khz max 0-0V, -0mA -bit 0-0V, -0mA -bit VDC VDC * SNMP V Trap, SNMP community Name V50-J-T V50-5-T 0 Digital, D/A Inputs Transistor 0kHz, -bit 0-0V, 0-0mA, -0mA 7 VDC 6 There were significant cost savings using the Unitronics. Justin Butler, Senior Electrical Engineer at Energy Plant Solutions V50-J-T V50-J-TA V50-JS-TA V50-5-T V50-5-TA V50-S-TA In some models certain inputs are adaptable via wiring and software settings, and can function as digital, high-speed, analog, and in certain models as TC or PT00. Adapting requires input pins. This reduces the number of digital inputs. Pin requirements: 0 Digital, D/A Inputs 6 Transistor Digital, D/A, TC/PT00/ Digital Inputs 0 Transistor, Analog 0kHz, -bit 0kHz, -bit Each high-speed requires or pins according to high-speed mode. Each analog input requires pin. Each TC requires pins per TC input The first PT input requires pins, and two additional pins for each additional PT input. 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA -bit Example: V50-5-RA offers digital inputs. Implementing TC inputs requires pins, leaving pins free. Implementing PT inputs uses 5 input pins. The total number of digital inputs listed includes high-speed and adaptable inputs. Thermocouple, PT00 6 0 7 5 The total number of digital outputs listed includes high-speed outputs. Extended temperature cards: CANBus p/n: V00-S-CAN, Ethernet p/n V00-S-ET VDC 0-0V, -0mA -bit VDC 7

Samba TM Series Vision TM Series UniStream Series Features: Size:." Monochrome Multi-language display Built-in Alarm Screens 0 I/O options including digital, analog, high speed, temperature, and weight measurement Expand up to 56 I/Os Auto-tune PID, up to independent loops Recipe programs and data logging via data tables Micro SD card - log, backup, clone & more Function Blocks Palm-size, powerful with built-in black & white LCD.", keypad and I/Os, expands up to 56 I/Os. Total supported I/Os 56 Built-in According to model (See Built-in I/O Modules below) I/O Expansion Add Local I/O via expansion port Add Remote I/Os via CANbus. (See I/O Expansion Modules- page ) Local I/O Expansion Use Local Expansion Adapters to add up to modules Remote I/O Expansion Use EX-RC adapters to further extend the number of I/Os Application Memory Application Logic: 5KB Images: 56KB Fonts: KB Scan Time 0μ sec per K of typical application Memory Operands 096 coils, 0 registers, 56 long integers (-bit), 6 double words (-bit unsigned), floats, 9 timers (-bit), counters Additional non-retainable operands: 0 X-bits, 5 X-integers, 56 X-long integers, 6 X-double words Panel Touch screen - Cut Out Height x Width (mm) 9 x 9 Resolution x 6 Keys 0, including 0 user labeled keys (slide kit sold separately) Protection NEMAX, IP66, IP65 (when panel mounted) Operating Temperature 0 to 50ºC Standards Power Supply CE, UL Many of our products are also UL Class Div and GOST certified - please contact Unitronics 7 years typical at 5 C, battery back-up for all memory sections and RTC VDC, except for V0J-B, which is /VDC Jazz Series Ethernet TCP/IP CANbus RS5 RS ports may be added: Serial/Ethernet/Profibus and CANbus MODBUS TCP SNMP* Remote access utilities CANopen, UniCAN, CANlayer BACnet, KNX and M-Bus via gateway FB Protocol: message Composer for rd party protocols Web server E-mail & SMS G Modem support * SNMP V Trap, SNMP community Name, SNMP VC Trap V0-J Flat Panel The perfect solution for our need, the Vision0 is easy to program, user-friendly and backed up with responsive tech support. Michael Lamore, President of Barrier Vision0 models - Built-in I/Os Article Summary Digital HSC/Shaftencoder EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m. Inputs Analog Temperature Measurement Transistor PWM/HSO Relay Analog V0-J-B V0--B No onboard I/Os /VDC V0-J-TR0 V0-J-R V0-J-TR V0-J-TR6 V0-J-RA V0--TR0 V0--R V0--TR V0--TR6 V0--RA V0-J-TRA V0--TRA V0-J-T V0-J-T V0-J-TA V0--T V0--T V0--TA 0 Digital, D/A Inputs 6 Relay High-speed Transistor 0 Digital, D/A Inputs Relay 0 Digital, D/A Inputs Relay, High-speed Transistor 6 Digital, D/A Analog Inputs 6 Relay High-speed Transistor Digital, D/A, TC/PT00/ Digital Inputs Relay, Analog Digital, D/A, PT00/ TC/ Digital Inputs Relay, Analog, High-Speed Transistor 0 Digital, D/A Inputs Transistor 0 Digital, D/A Inputs 6 Transistor Digital, D/A, TC/PT00/ Digital Inputs 0 Transistor, Analog In some models certain inputs are adaptable via wiring and software settings, and can function as digital, highspeed, analog, and in certain models as TC or PT00. Adapting requires input pins. This reduces the number of digital inputs. Pin requirements: 0-0V, 0-0mA, -0mA 00kHz, -bit 0kHz, -bit 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA 00kHz, -bit 00kHz, -bit 0kHz, -bit 00kHz, -bit 0kHz, -bit 0kHz, -bit 0kHz, -bit Each high-speed requires or pins according to high-speed mode. Each analog input requires pin. Each TC requires pins per TC input The first PT input requires pins, and two additional pins for each additional PT input. 0-0V, 0-0mA, -0mA and 0-0mA, -0mA 0-0V, 0-0mA, -0mA -bit 0-0V, 0-0mA, -0mA -bit 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA 0-0V, 0-0mA, -0mA -bit ( PTO) 00 khz max Operating Voltage 6 VDC VDC Thermocouple, PT00 Thermocouple, PT00 Thermocouple, PT00 ( PTO) 00 khz max ( PTO) 00 khz max 6 0 ( PTO) 00 khz max 7 7 5 VDC 6 VDC 0-0V, -0mA -bit 0-0V, -0mA -bit VDC VDC VDC VDC 0-0V, -0mA -bit VDC Example: V0--RA offers digital inputs. Implementing TC The total number of digital inputs listed includes high-speed and adaptable inputs. inputs requires pins, leaving pins The total number of digital outputs listed free. Implementing PT inputs uses includes high-speed outputs. 5 input pins. 9

Features: Full-function with built-in, highresolution full-color touch screen and built-in I/O configuration. Great look, incredible price. SAMBA Article Number SAMBA.5 SAMBA. SAMBA 7 Total supported I/Os Samba TM Series Vision TM Series UniStream Series Size:.5",.", 7" High quality touchscreen, 6K Multi-language display Built-in Alarm Screens I/O options including digital, analog, and high speed Auto-tune PID, up to independent loops Recipe programs and data logging via data tables Function Blocks Mini USB for programming for." & 7"models RS for.5" model SAMBA.5" Built-in According to model (See Built-in I/O Modules below) I/O Expansion - Remote I/O Expansion Use EX-RC adapters to further extend the number of I/Os COM Modules Application Memory Scan Time Memory Operands Panel Touch screen Cut Out Height x Width (mm) Application Logic: KB Images: MB Fonts: 5 KB Fit up to CANbus, RS/RS5, Ethernet Application Logic: 76KB Images: MB Fonts: 5 KB 5μS per K of typical application Application Logic: 76KB Images: 5 MB Fonts: 5 KB 5 coils, 56 registers, long integers (-bit), double words (-bit unsigned), floats, timers (-bit), 6 counters. Additional non-retainable operands: 6 X-bits, X-integers, 6 X-long integers, 6 X-double words Resistive, Analog 9 X 9.5 X 9.5 9 X 5 Resolution 0 X 0 (QVGA) 0 X 7 00 x 0 (WVGA) Keys Displays virtual keyboard when the application requires data entry Jazz Series Add-on ports: Ethernet TCP/IP CANbus RS/ RS5 Protection NEMAX/IP66/IP65 (when panel mounted) Operating Temperature 0 to 50ºC Standards CE, UL Many of our products are also UL Class Div and GOST certified - please contact Unitronics MODBUS TCP Remote access utilities SNMP* CANopen, UniCAN, CANlayer BACnet, KNX and M-Bus via gateway FB Protocol: message Composer for rd party protocols SAMBA." Power Supply Samba models - Built-in I/Os Article Summary Digital 7 years typical at 5 C, battery back-up for RTC and system data, including variable data VDC EX-RC: via CANbus, integrate standard Unitronics I/O modules at distances of up to 000m. Refer to website for more information. HSC/Shaftencoder Inputs Analog Temperature Measurement Transistor PWM/HSO Relay Analog Operating Voltage E-mail & SMS G Modem support SM5-J-R0 SM-J-R0 SM70-J-R0 0 Digital, D/A Inputs, Relay 0kHz, -bit 0-0V, 0-0mA, -0mA VDC * SNMP V Trap, SNMP community Name SM5-J-T0 SM-J-T0 SM70-J-T0 0 Digital, D/A Inputs, Transistor 0kHz, -bit 0-0V, 0-0mA, -0mA 7 VDC SM5-J-RA SM-J-RA SM70-J-RA Digital, HSC/Shaftencoder, AI, PT00/TC, Relay, AO 0kHz, -bit 0-0V, 0-0mA, -0mA /-bit PT00/TC 0-0V, -0mA, -bit VDC SM5-J-TA SM-J-TA SM70-J-TA Digital, HSC/Shaftencoder, AI, PT00/TC, Transistor, AO 0kHz, -bit 0-0V, 0-0mA, -0mA /-bit PT00/TC 5 0-0V, -0mA, -bit VDC SAMBA 7" In some models certain inputs are adaptable via wiring and software settings, and can function as digital or analog. Adapting requires input pins. This reduces the number of digital inputs. Pin requirements: Each analog input requires pin. Example: SM5-J-R0 offers digital inputs. Implementing analog inputs requires pins, leaving 0 pins free. The total number of digital inputs listed includes highspeed and adaptable inputs. The total number of digital outputs listed includes high-speed outputs. When selecting NPN for the digital inputs, the Analog inputs cannot be used. 0

Jazz Series Samba TM Series Vision TM Series UniStream Series Features: Up to 60 user-designed screens Multi language I/O options including digital, analog, temperature and high speed (according to model) Auto-tune PID, up to independent loops (according to model*) Mini USB for programming PC access via MODBUS or OPC server Remote access utilities Supports MODBUS protocol (according to model) SMS via GSM G Modem support * Up to loops: models UA / UN0 / PT5 loop: all other models Jazz -J Flat Panel An All-in-One unit affordable as a "smart relay". Full-function combined with a textual and keypad, with up to 0 built-in I/Os. Total supported I/Os 0 Built-in According to model I/O Expansion - Memory Operands 56 coils, 56 registers, 6 timers Ladder Memory K Panel Touch screen - Cut Out Height x Width (mm) 7 x 9 Resolution lines, 6 characters Keys 6 keys, including 0 user-labeled keys Protection NEMAX/IP65 (when panel mounted) Operating Temperature 0 to 50ºC Standards Power Supply Jazz models - Built-in I/Os CE, UL Many of our products are also UL Class Div and GOST certified - please contact Unitronics 0 years typical at 5 C, battery back-up for RTC and system data, including variable data Inputs Article Summary Digital HSC/Shaft-encoder Analog JZ0-R0 JZ0-J-R0 JZ0-R6 JZ0-J-R6 6 Digital Inputs Relay 6 Digital, D/A, Analog Inputs 6 Relay 6 VDC Temperature Measurement Transistor PWM/HSO Relay Analog Operating Voltage VDC 0-0V 0 or -bit 0-0mA, -0mA 0 or -bit 6 VDC JZ0-J-R6HS 6 Digital, HSC/Shaft-encoder, A/D, AI, 6 Relay outputs 0-0V 0 or -bit 0-0mA, -0mA 6 VDC Jazz Classic Panel JZ0-R JZ0-J-R JZ0-T0 JZ0-J-T0 JZ0-T JZ0-J-T JZ0-J-T0HS JZ0-T0 JZ0-J-T0 Z0-UA JZ0-J-UA JZ0--UN0 JZ0-J-UN0 6 Digital, D/A, Analog Inputs Relay 6 Digital Inputs Transistor 6 Digital, D/A, Analog Inputs Transistor 6 Digital, HSC/Shaft-encoder, A/D, AI, 0 Transistor outputs 6 Digital, D/A, Analog Inputs 0 Transistor 9 Digital Inputs, HSC, A/D, AI, TC/PT00, 5 Relay, Transistor, AO 9 Digital, D/A, Analog TC/PT00 Inputs 5 Relay Transistor 0kHz, 6-bit 0-0V 0 or -bit 0-0mA, -0mA 6 0kHz, 6-bit 5kHz, 6-bit 0-0V 0-0mA, -0mA 0-0V 0-0V 0-0mA, -0mA 0-0mA -0mA 0-0 VDC 0-0V 0-0mA, -0mA VDC Thermocouple, PT00 Thermocouple, PT00 0 VDC VDC khz VDC VDC 5 +/-0V, -0mA -bit VDC 5 VDC In some models certain inputs are adaptable, and can function as either digital or analog. Adapting requires input pins. This reduces the number of digital inputs. Pin requirements: Each analog input requires pin. Note that the high-speed inputs are included in the total number of digital inputs Note that the high-speed outputs are included in the total number of / digital outputs In order to download applications and enable communications, install Jazz with the appropriate Add-on Module. JZ0 can be programmed via built-in USB device port.

UniStream Series Vision TM Series Samba TM Series Jazz Series I/O Expansion Modules & Accessories- Vision Series Expand your system with local or remote I/O expansion modules. Digital XL Digital/ Analog High-speed Remote I/O Module Inputs Operating Expansion Temperature Weight Digital Voltage Modules Article HSC 5 Analog Transistor Measurement Measurement PWM/HSO 6 Relay Analog IO-DI-TO VDC / 5kHz 6-bit IO-DI-RO VDC / 5kHz 6-bit IO-DI-RO VDC / 5kHz 6-bit EX90-DI-RO VDC 5kHz 6-bit IO-DI6 VDC 9 6 IO-TO6 VDC IO-RO VDC 9 IO-RO6 6 VDC 9 IO-DIACH AC 0/0 VAC 6 / 5kHz 6-bit IO-AI-AO 0-0V, 0-0mA, -0mA -bit IO-PT00 IO-PTK I/O Expansion Module Adapters I/O Expansion Module Adapters PT00/NI00/NI0 PT000/NI000 IO-AO6X IO-LC IO-LC IO-ATC IO-AI IO-D6A-RO6 IO-D6A-TO6 6 / 6 / EX-D6A-RO 7 6 / EX-D6A-TO6 7 6 / EXF-RC5, 9 / Article EX-AX EX-RC, 0kHz 6/-bit 0kHz 6/-bit 0kHz 6/-bit 0kHz 6/-bit 00kHz -bit ±0V -bit+sign, 0-0mA, -0mA -bit VDC Not relevant Not relevant Loadcell / Strain gauge Loadcell / Strain gauge 6 (Isolated) 0-0V, 0-0mA, -0mA -bit VDC VDC VDC Thermocouple, 0-0V, 0-0mA, -0mA -bit Not relevant 0-0V, 0-0mA, -0mA Not relevant -bit 0-0mA, -0mA 6 VDC 0-0mA, -0mA 0-0mA, -0mA 0-0mA, -0mA Description 5, / 50kHz None VDC None None VDC Local I/O module adapter, Galvanic isolation. Up to modules may be connected to a single Supports both / VDC Remote I/O module adapter, via CANbus. Multiple adapters may be connected to a single, with up to modules to each adapter. Supports both / VDC. 5 6 7 9 5 / 50kHz (up to PTO) None VDC VDC Number of supported I/Os & I/O modules varies according to module. The EXF-RC5 functions as a node in a Vision UniCAN network and connects to the Vision controller via CANbus and programmed in VisiLogic. The EXF-RC5 cannot be extended as regular I/O unit. High-speed inputs are configurable as either high-speed counter (HSC) or shaft-encoder. The EX90 is housed in an open casing. Only one EX90 can be connected per, as a single expansion module; Expansion adapter not required. Supported by Vision and Samba series. The total number of digital inputs listed includes high-speed inputs. Example: the IO-D6A-TO6 offers a total of 6 / inputs. You can configure I as a HSC and I5 as a Counter reset; this reduces the available number of digital inputs to. The total number of digital outputs listed includes high-speed outputs. Example: the IO-D6A-TO6 offers a total of 6 transistor outputs. You can configure to High-speed output, reducing the number of available digital outputs to 5. Functions as local adapter. Can support up to 7 I/O modules. Snap-in I/O Modules Compatible with Vision models: V560, V570, V700, V00 and V0. Snap-in I/O Article V00--EB V00--EB V00--EXB V00--EXB V00--E5B V00--E6B V00--E6B Additional COM Modules Enhance Vision s communication capabilities Vision Model Ethernet RS/RS5 Isolated RS/RS5 CANbus Profibus SAMBA V00-7-ET V00-7-RS V00-7-RSX V00-7-CAN V0, V50, V0 Digital (isolated) 6 / 6 / / / / / / V00--E6B 0 / Analog, Temperature and Weight/Strain Measurements HSC/Shaftencoder 0kHz -bit 0kHz -bit 0kHz -bit 0kHz -bit 0kHz -bit 0kHz -bit 0kHz -bit 0kHz -bit V00-7-ET, V00-S-ET 5 V00-7-RS V00-7-RSX Inputs Temperature Analog Measurement 0-0 V, 0-0mA, -0mA 0-0 V, 0-0mA, -0mA (Isolated) Thermocouple, PT00, 0-0V, 0-0mA, -0mA -bit (Isolated) Thermocouple, PT00, 0-0V, 0-0mA, -0mA -bit 0-0 V,0-0mA, -0mA V00-7-CAN, V00-S-CAN V00-7-PB V00,V500, V00,V0 V00-9-ET V00-9-RS V00-9-RS-X Included V700 6 Built-in V00-7-RS V00-7-RSX V00-7-CAN V00-7-PB Thermocouple, PT00, 0-0V, 0-0mA, -0mA -bit 0-0V, 0-0mA, -0mA 6 0-0 V,0-0mA,-0mA -bit 0-0 V,0-0mA,-0mA 0-0 V,0-0mA,-0mA Transistor PWM/HSO (isolated) Relay Analog / / / 5 / 5 / / / / V560, V570/V700/V00/V0: optional port for serial or Ethernet, V0/V50: optional port for serial or Ethernet & optional port for CANbus/ Profibus. 5 Extended temperature cards, operational temperature : -0ºC to 60ºC (-ºF to 0ºF). 6 V700 is supplied with an onboard Ethernet port. port may be added, either serial, CANbus, or Profibus. 50kHz 50kHz 50kHz 50kHz 50kHz 50kHz 00kHz 00kHz Operating Voltage 0 VDC 0 5 0-0 V,0-0mA,-0mA -bit (Isolated) 0-0 V, -0mA -bit (Isolated) 0-0 V, -0mA -bit VDC VDC VDC VDC 5 5 (Isolated) 0-0 V, -0mA -bit (Isolated) 0-0 V, -0mA -bit VDC VDC VDC The total number of digital inputs listed includes high-speed inputs. The total number of digital outputs listed includes high-speed outputs. Not yet UL certified DIN-rail Power Supplies UAP-VW UAP-V60W UAP-V96W W V A 60W V.5A 96W V A GSM GSM-KIT-7J-G KIT, MODEM GPRS, CINTERION, EHS6T COM Port kit Ethernet Port Cloner module Keypad Slide kit RS/RS5 Add-on port (isolated) Article No.: JZ-RS Add-on modules and accessories Ethernet Add-on port Supported by Jazz series only Article No.: MJ0-ET* Copy applications from to Article No.: MJ0-MEM Customize the Jazz keypad to your application Article No.: MJ0-JZ-SL 6-bit or -bit, depending on the. Also available as VDC contact us for part number. * Not yet UL certified 5