PRODUCT CATALOG 2013 Installed AV Attero Tech, LLC 1315 Directors Row Fort Wayne, IN 46808 (260) 496-9668 www.atterotech.com Issued July 2013
Dante Attero Tech und32 32-Channel Breakout Interface The und32 32 Channel Dante Break Out Interface (BoB) is a 32 Channel, 1RU Dante break out interface for all types of commercial AV installations. Applications from stadia to convention centers to houses of worship will find immediate use for this cost-effective and high density Dante endpoint solution. Audio quality is paramount in the design of the D32. Each of the 32 analog outputs on the D32 may be assigned to any Dante flow in the system, either by means of the front panel controls or using Audinate s Dante Controller Windows or OSX application. A 16x2 display shows flow names and signal levels for each of the 32 analog output channels. In addition, each output level is individually controllable over a 60dB range plus mute. The D32 features both primary and secondary Gigabit Dante network connections for full redundancy, as well as a third local Gigabit port. This port gives network access to other equipment in the rack (e.g. amplifier controllers, control devices, etc.) without the need for a separate Ethernet switch. Part Number: 900-00158 Available Q3 2013 Attero Tech undio2x2 2in/2out I/O Interface The undio2x2 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system. The DIO2x2 s small form factor and PoE power capability make it easy to put Dante connectivity wherever it s needed - near the audio source or sink, thereby eliminating costly and interference prone analog wiring. Part Number: 900-00160
Dante Attero Tech undx2io The undx2io Dante Audio Interface is a cost effective 2in/2out wall box. The undx2io features two balanced XLR inputsand two balanced XLR outputs. Phantom power and mic preamp gain can be controlled via software. An ID LED is provided to identify the undx2io currently connected to the Attero Tech Unify software application. The undx2io is designed to fit into most US dual gang junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. Part Number: 900-00162-W White finish, white Decora plate included Part Number: 900-00162-B Black finish, black Decora plate included
OUTBOXES COOLBOXES ACCESSORIES Attero Tech InBox M3 The InBox M3 Audio Interface is a cost effective multi-input wall box. The M3 features a balanced XLR input, a pair of RCA inputs, and a stereo minijack input. All five inputs can be used simultaneously and all audio channels are available separately. The M3 is designed to fit into most US dual gang junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. Part Number: 900-00127-W White finish, white Decora plate included Part Number: 900-00127-B Black finish, black Decora plate included Attero Tech InBox X2 The InBox X2 Audio Input Interface is a cost effective two input, mic/line level wall box. The X2 features switchable mic/line gain, Switchable +12 V phantom power, and clipping indicators for each channel. The X2 is designed to fit into most dual gang junction boxes and is PoE enabled, so all connectivity (both power and audio data) to the X2 is provided by a single CAT-5 cable. Part Number: 900-00106-W White finish, white Decora plate included Part Number: 900-00106-B Black finish, black Decora plate included Attero Tech InBox R8 The InBox R8 Audio Input Interface is a cost effective eight input, line level wall box. The R8 features eight unbalanced RCA inputs, which can be used as either eight mono inputs or four stereo inputs. The R8 is designed to fit into most dual gang junction boxes and is PoE enabled, so all connectivity (both power and audio data) to the R8 is provided by a single CAT-5 cable. Part Number: 900-00108-W White finish, white Decora plate included Part Number: 900-00108-B Black finish, black Decora plate included
INBOXES OUTBOXES COOLBOXES ACCESSORIES Attero Tech OutBox X2 The OutBox X2 Audio Output Interface is a cost effective two output line level wall box. The X2 features two balanced outputs. The X2 is designed to fit into most dual gang junction boxes and is PoE enabled, so all connectivity (both power and audio data) to the X2 is provided by a single CAT-5 cable. Part Number: 900-00107-W White finish, white Decora plate included Part Number: 900-00107-B Black finish, black Decora plate included Attero Tech OutBox R8 The OutBox R8 Audio Output Interface is a cost effective eight output, line level wall box. The R8 features eight unbalanced RCA outputs, which can be used as either eight mono outputs or four stereo outputs. The R8 is designed to fit into most dual gang junction boxes and is PoE enabled, so all connectivity (both power and audio data) to the R8 is provided by a single CAT-5 cable. Part Number: 900-00109-W White finish, white Decora plate included Part Number: 900-00109-B Black finish, black Decora plate included
INBOXES OUTBOXES COOLBOXES ACCESSORIES Attero Tech DialogBox 4/2 The DialogBox 4/2 Audio Interface is a cost effective 4-in / 2-out mic/line automixer. The DialogBox 4/2 features four balanced inputs, with both gain and +24V phantom power selectable via software on a per channel basis, and two line level balanced outputs. All outputs can contain any mix of local and network audio inputs. Logic inputs provide the capability to selectively mute various combinations of DialogBox 4/2 inputs and outputs. The DialogBox 4/2 uses a gain sharing automix algorithm for seamless and robust automixing. The DialogBox 4/2 can be powered from either standard PoE or +12VDC. Part Number: 900-00155 Attero Tech SquawkBox The SquawkBox Audio Interface is a cost effective desktop audio product designed to allow a user to easily monitor multiple channels of audio on a based AV system. Up to 16 channels can be monitored using either the internal speaker or with headphones. A 17th override channel can be initiated externally for system wide announcements. The SquawkBox can be powered by either PoE or by a DC adapter. Part Number: 900-00141
INBOXES OUTBOXES COOLBOXES ACCESSORIES Attero Tech VoiceBox 4I/OP The VoiceBox 4 I/OP Audio Interface is a cost effective 4 in/4 out mic/line preamp. The VoiceBox 4I/OP features 4 balanced inputs, with both gain and +12V phantom power selectable on a per channel basis, and 4 line level balanced outputs. All outputs can contain any mix of local and network audio inputs. An RS-232 Serial Bridge port enables the transmission of serial data From any VoiceBox 4 I/OP to any other device supporting a serial bridge connection on a system. The VoiceBox 4I/OP can be powered from either standard PoE or +12VDC. Part Number: 900-00138 Attero Tech BoomBox NA4 The BoomBox NA4 Audio Interface is a cost effective fourchannel networked power amplifier for paging and background music applications. Each channel can amplify either of two received audio streams. Each channel has its own volume control, and both signal routing and volume are controllable over the network. The BoomBox can be powered by either PoE, PoE+, or by a +12VDC to +24VDC external power supply Part Number: 900-00142 Attero Tech MatchBox USB Multi-media PCs are becoming more important as media sources, not only in home settings, but in a variety of commercial audio installation settings as well. The MatchBox USB is a cost-effective general purpose solution for direct integration of media PC audio streams into and/or back from a -based system. The MatchBox USB appears to the PC as a USB Sound Card and can be configured for 8 channels of audio in various input and output modes. Part Number: 900-00110
INBOXES OUTBOXES COOLBOXES ACCESSORIES For: All +12VDC Compatible Products, Universal AC Input Voltage Part Number: 900-00144 Single 1U Rack Kit to mount a single 1/2 rack unit Part Number: 900-00139 Single 1U Rack Kit to mount two 1/2 rack units Part Number: 900-00140
Attero Tech, LLC 1315 Directors Row Fort Wayne, IN 46808 (260) 496-9668 www.atterotech.com