H01 User Manual 1. Mobile Application 1.1. Downloading 1.1.1. Scan the following QR code and install the app; 1.1.2. Search key word Dowear on AppStore and Google Play and install the app. 1.2. Register 1.2.1. After installing successfully, run the app; 1.2.2. Click new user button, inputting your email address and mobile number, then you can click next step and finish registration under instruction. 1
1.3. Use 1.3.1. Smart phone connects WIFI or enable cellular data; 1.3.2. Input the email account and password, then click Login and enter APP interface. 1.3.3. Add watch After login APP, click the icon at the upper left corner, and enter the interface of adding the watch. Scanning any of the following QR code or input directly the CID code to add the watch: 1.3.3.1. OR code below 1.3.3.2. QR code labeled on the back of the watch; QR code of CID labeled here The QR code is the ID to add the watch, please keep it carefully. 2
1.3.3.3. QR code on packaging 1.3.3.4. Before the watch being added, the QR code will pop up automatically after power on The account which first add the watch, can be the administrator of this watch, which has the supreme authority to manage the watch. 1.4. Main Functions 1.4.1. Avatar Click the avatar, and enter the interface of User Information, and set the related information of the kid who wear the watch. 1.4.2. Location 1.4.2.1. Map on the main interface 1.4.2.1.1. Safety Area You can set a certain area like at home, at school, at XXXX district etc. 1.4.2.1.2. Behavior Mode The kid who wears the watch is walking, on the bus, on the metro or inside or still. 1.4.2.1.3. Location Mode Smart Location Mode:the watch will intelligently locate according to the real situation; Manual Location Mode: the watch will locate only when clicking location button. 1.4.2.1.4. Watch Status If the watch is in state of power off, it will show powered off. 1.4.2.2. Click and enter the interface of location 1.4.2.2.1. Clicking Location,you can check the current location of the watch;( Note:the watch is powered on with SIM card in, and the SIM card opens GPRS function) 1.4.2.2.2. Clicking Track, you can check the history track of the watch on the same day; choosing the certain date, you can check the track 3
on that day. 1.4.3. Call Click Call 1.4.3.1. Android smart phone,enter the interface of dialing, and click the Dial button on the phone to make a phone call; 1.4.3.2. Iphone,make a phone call directly. Monitor(administrator only has such function): 1.4.3.3. click Monitor, and prompt enabling, then calling the watch while the watch will pick up without ring and vibration. The smart phone can hear the sound around the watch, while the watch cannot hear the sound over the smart phone. 1.4.4. Voice Enter the interface of Message 1.4.4.1. Long press Hold to talk, and send voice message to the watch(note: limitation of the voice is 15s) When the watch sends new voice message to the smart phone, there will be a red dot on the Voice button on main interface as a notification. On the interface of Voice, you can receive and hear the voice message (when the app runs at backend,there will be push notification of voice message); 1.4.4.2. Remote camera(administrator only has such function):click Remote camera,and prompt remote camera starting, then the watch will photograph automatically and send the picture to the APP. 1.4.5. Manage 1.4.5.1. Click and enter Avatar,you can check or edit the user information of the watch. 1.4.5.2. Click and enter Family&Friends,you can transfer administrator, delete, add new member, check, edit or delete the phone numbers of the Family&Friends ; 1.4.5.3. Click and enter Fence list,you can set the safety area of the watch. 4
1.4.5.4. Click and enter Location mode,you can set the mode of the positioning; 1.4.5.5. Click the below options like Remote watch turn off watch tracking,you can enable or set the corresponding functions. 1.4.6. Pedometer It shows the steps of that day and the recent 7 days. 2. Use 2.1. Without SIM Card, power on and enter watch mode automatically 2.1.1. Advice you to wear the watch normally, and go to the open air, long press on the Power/SOS button for 3s and the watch will be switched on. Then please wait for one minute around, the watch will update the time by GPS (accurate to 0.01s); 2.1.2. Tape on the screen,and check the time, date, week, weather and steps; 2.1.3. In standby,long press on the Power/SOS button for 3s around,the watch will be switched off automatically; 2.2. With SIM Card,power on and enter mobile mode automatically 2.2.1. 1.In the state of power off,insert the SIM Card according to the direction shown by the following picture (Make sure that the SIM card has enabled the functions of Caller ID, sending&receiving SMS and GPRS); 2.2.2. Long press on the Power/SOS button for 3s around,the watch will synchronize with the server within 1min with normal network; 2.3. Functions on watch Add the watch by APP, insert SIM card into the watch and switch on, the watch will synchronize with the server. 2.3.1. Call Phone numbers only added into the Family&Friends can call the watch, and the watch can call the phone numbers of the Family&Friends only. 2.3.1.1. Call In the state of standby, Slide the touch screen rightwards and leftwards and 5
choose call, click the icon,and enter phone book list: 2.3.1.1.1. Slide the touch screen and choose phone number; 2.3.1.1.2. Click the avatar, and call the number showing; 2.3.1.1.3. Dialing and during the call, short press Power/SOS button or slide upwards to hang off; 2.3.1.1.4. Short press on Power/SOS button or slide upwards to exit the contact list. 2.3.1.2. Answering calls When calling in, click icon,and answer the phone call;short press on Power/SOS button or slide upwards to hang off. 2.3.1.3. S.O.S. On any interface, on the Power/SOS button for 3s around: 2.3.1.3.1. Watch will automatically send the current location to the administrator and backup administrator ; 2.3.1.3.2. Call on the loop automatically for three times, until someone picks up or hang off; 2.3.1.3.3. short press on Power/SOS button or slide upwards to hang off. 2.3.2. Voice 2.3.2.1. Sending In the state of standby, slide the touch screen and choose Voice, tape on icon,and enter voice book list: 2.3.2.1.1. Slide the touch screen and choose the voice number; 2.3.2.1.2. Click avatar and enter the interface of record, and press on icon and start to record; 2.3.2.1.3. After finish recording, the watch can send the voice data to app (after reach the limitation of 15s, it will stop and send automatically); 2.3.2.1.4. In the course of recording, slide upwards and cancel recording, 6
exit by short pressing on the Power/SOS button or sliding upwards. 2.3.2.2. Receiving When receiving voice message: 2.3.2.2.1. The voice message icon shows on the watch GUI; 2.3.2.2.2. Click and hear the voice message(you can choose not to hear the voice message by sliding upwards the touch screen); 2.3.2.2.3. Click and stop or repeat the voice message 2.3.2.2.4. Exit by short pressing on the Power/SOS button or sliding upwards. 2.3.3. Camera In the state of standby, slide the touch screen and choose Camera,and enter the interface of preview: 2.3.3.1. Click and take photo, save and switch to the contact list. Slide the touch screen and choose which one to send by clicking the avatar and send the picture; 2.3.3.2. Exit by short pressing on the Power/SOS button or sliding upwards. 2.3.4. Shake buddy In the state of standby, slide the touch screen and choose Shake buddy, click and enter the inter face of shaking: 2.3.4.1. Two watches with the functions of Voice and shaking both enter the interface of shaking, shake the watch at the same time to enable the function and start to pair; 2.3.4.2. After paring successful, will show on the GUI which indicates adding the budding successfully and you could enter into the voice book to start chatting; 2.3.4.3. When the pairing failed, will show on the GUI,and you can 7
shake again for pairing; 2.3.4.4. In the course of pairing, you can exit by short pressing on the Power/SOS button or sliding upwards; 3. Charging Instructions and Reminders 3.1. Charging Instructions Put the magnetic cable close to the charging port at right direction, it will be sticked automatically onto the watch. Then it start to charge, and normally it takes 2~3 hours for full charging. 3.2. Charging reminders 3.2.1. In order to ensure the battery life, the watch should be charged for above 12 hours for the first time, and 8 hours for the second and third time; 3.2.2. The adapter should be approved by CCC certificate, without which the battery will explode or the watch will breakdown. 4. Accessories 4.1. Magnetic USB cable 4.2. User manual 5. Notice 5.1. Keep the watch away from the fire, Oppressive heat and spikes or other extreme atmosphere; 5.2. Avoid the kid from eating the watch; 5.3. Location cannot work when power off, out of balance or without GSM network. 8