Product Name: Manufacturer: - Model Number: - Please Note the has been discontinued, please see the EnGenius ENH200EXT or EnGenius ENH-200 as alternative products.availability: Discontinued EnGenius EOC2611P Outdoor Access Point 802.11g Outdoor High Power 600mW Bridge / Access Point with Dual Antenna Polarity & Dual Antennas The EnGenius EOC2611P Outdoor Access Point is a long range outdoor wireless client bridge / access point that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with SuperG.The EOC2611P from EnGenius features high transmit power and high receive sensitivity, which extend wireless range and coverage to reduce roaming between access points and to get a more stable wireless connection. It also reduces the total costs of hardware ownership. With the new dual polarity antenna, users can utilize multi-polarization for best performance. EnGenius EOC2611P Outdoor Access Point - Features Integrated Dual Polarity Antenna Design - Selectable vertical or horizontal antenna polarization, operates in horizontal polarity to avoid interference from standard vertical-polarized Wi-Fi devices, allows service provider to utilize multi-polarization for best performance. Waterproof Cable Accessory Kit - Prevents rain and dew getting in through the device cables connector holes, ensures higher waterproof quality against water and moisture. High 600mW Wireless Power - Ensures robust signal to overcome long distances, offers superior WiFi coverage over leading brands. Dual Antenna Design - Embedded 10dBi Dual Polarity panel antenna with external connector for upgradeable antenna, perfect for both Point-to-Point and Point-to-Multipoint applications. Signal Strength LED Indicator (Client Bridge Mode) - Allows network installer for easy deployment. Multiple Wireless Names (AP Mode) - Broadcasts multiple SSID's in one device, permits different levels of network access (VLAN Tagging). Power-over-Ethernet (24V PoE) Capable - Power and data over one single cable for convenient installation, less heat dissipation to ensure reliable performance, capable of 300 feet PoE cable length, power injector included. EnGenius EOC2611P supports distance control by 1km to 30km and RSSI indicator, which enable the best transmit and receive signals for wireless communication. It also comes with PoE injector (24V) to make outdoor deployment fast and easy. To protect your wireless connection, EnGenius EOC2611P can encrypt all wireless data by 64/128/152-bit WEP encryption or WPA2/WPA. MAC address filter allows user to select exactly which stations should have the access to your wireless network. In addition, user isolation function can protect the private network between client users. The attractive design, superior performance, and array of features make the EnGenius EOC2611P an ideal wireless solution for any residences or offices. www.4gon.co.uk op@support.4gon.co.uk Page 1/6
EnGenius EOC2611P - Technical Specifications Hardware MCU/RF: Atheros AR2316 Memory: 32MB SDRAM Flash: 8MB Physical Interface One 10/100 Fast Ethernet RJ-45 One Reset Button One Antenna Switch One RP-SMA Connector LED Indicators: 1x Power (Status) 1x LAN (10/100Mbps) 1x WLAN (Wireless Activity) 3x Link Quality (Client Bridge mode) Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality Power Requirements: Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design Power Adapter: 24V/0.6A DC Regulation Certifications: FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17, EN60950 RF Frequency Band: 2.412~2.472GHz Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK Operating Channels: 11 for North America / 14 for Japan / 13 for Europe Receive Sensitivity (Typical) IEEE 802.11g: -92dBm @ 6Mbps -74dBm @ 54Mbps Receive Sensitivity (Typical) IEEE 802.11b: -97dBm @ 1Mbps -89dBm @ 11Mbps Available Transmit Power (Average) IEEE 802.11g: 28dBm @ 6~24Mbps 26dBm @ 36Mbps 24dBm @ 48Mbps 23dBm @ 54Mbps Available Transmit Power (Average) IEEE 802.11b: 28dBm @ 1~11Mbps www.4gon.co.uk op@support.4gon.co.uk Page 2/6
Antenna Internal: Directional Panel Antenna; Peak Gain 10dBi Horizontal -3dB Bandwidth: 70 Vertical -3dB Bandwidth: 35 Antenna Polarity: Dual-Polarized; Vertical/Horizontal Polarity Selection: Software Controlled External: RP-SMA Female Type Software Topology: Infrastructure Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11b/g (2.4GHz WLAN) Operation Mode: Access Point / Client Bridge / Client Router / WDS LAN: DHCP Server / DHCP Client VPN: VPN - pass through Wireless Channel Selection (Setting varies by countries) Transmission Rate 802.11b/g: 108(SuperG), 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps Long Distance Transmission: 1km to 30km Transmit Power Table Signal Strength LED Indicators (3 colors) Narrow Bandwidth Support 5/10/20MHz PING Function and Trace Route Function PPPoE (Client Router mode) Multiple SSID Support (up to 4)(Access Point mode) 802.1q VLAN Tagging Support Security WEP Encryption 64/128/152bits WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) 802.1x Authenticator Hide SSID in Beacons MAC Address Filtering (up to 50) Wireless STA (Client) Connected List QoS: WMM Management Configuration: Web-Based Configuration (HTTP) Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update Administrator Setting: Administrator Password Change Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds) System Monitoring: Status, Event Log SNMP: V1, V2c www.4gon.co.uk op@support.4gon.co.uk Page 3/6
MIB: MIB I, MIB II (RFC1213) and Private MIB Backup & Restore: Settings Through Web Time Setting: NTP (Auto Setting) / Manual Change Environmental and Physical Temperature Range: Operation -20 C to 70 C (-4 F to 158 F) / Storage -30 C to 80 C (-22 F to 176 F) Humidity (Non-condensing): 0%~90% Typical Dimensions: Length: 10.24" (260mm) x Width: 3.31" (84mm) x Height: 2.17" (55mm) Weight: 0.84lb. (380g) Accessories - Select From drop down options at top of page. POE-12TO24V Converter to enable you to run hardware such as many of our outdoor bridging kits etc. which need 24V, from normal 12V batteries. WLMNT 20" J Pole + fixed Wall mount: this kit is to convert any pole mount antenna to wall mount BUT not suitable for the grid antenna due to their large size and weight. WLMNT-30MMCLIP www.4gon.co.uk op@support.4gon.co.uk Page 4/6
Used when trying to mount outdoor products to 1" diameter poles (i.e. our WLMNT pole). WLMNT-ADJUST Adjustable base for WLMNT-JPOLE POE-CARSOCKET-50CM To allow you to take DC power from a battery, for example, and present it as a car/dc cigarette lighter socket. Comes with 50cm cable terminated by colour coded 4.8mm receptacles. Maximum current 5 amps. POE-12V7AHLEADACID 12V 7Ah sealed lead acid battery (please do not order this product for shipping outside of of mainland UK) Please Enquire Options available for : www.4gon.co.uk op@support.4gon.co.uk Page 5/6
12 to 24V DC/DC converter (12TO24V) Not Required, Required (+ 34.41). 30mm Jubilee Clip to fit WLMNT (WLMNT-30MMCLIP) Not Required, Required (+ 0.93). 20" J Pole fixed Wall mount Not Required, Required (+ 4.96). POE-CARSOCKET-50CM Not Required, Required (+ 5.93). POE-(12V7AHLEADACID) Not Required, Required (+ 29.05). Adjustable base (WLMNT-JPOLE) Not Required, Required (+ 5.76). www.4gon.co.uk op@support.4gon.co.uk Page 6/6