Xitanium LED driver Datasheet Xitanium LED drivers linear LV isolated Enabling future-proof LED technology Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as linear lighting, as well as downlighting and spot/accent lighting. High reliability underpinned by 5 year warranty, enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal derating. Most drivers feature central D operation. In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an adjustable output current. pplication-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand. nd the adjustable output current also enables operation of various LED P solutions from different manufacturers. enefits Features pplication High reliability underpinned by 5 year Simpler approval process and easy design-in Offices and industry warranty Future-proof flexibility application-oriented operating windows enable LED generation and complexity management ompatibility - can also be used for other manufacturers' modules or OEMs' own P designs Flicker and noise free diing with all Touch and DLI LED drivers due to amplitude diing (M) Operating windows - output current can be adjusted via the Philips MultiOne configurator ('TD' drivers) or with a resistor outside the driver Reduced ripple current and thermal derating for increased reliability Power ratings: 36W, 55W and 75W DLI diable & prograable, 1-10V diable, and fixed-output versions ll T5 form factors but various lengths
Electrical input data Nominal input voltage 220...240 Vac performance range Nominal input frequency 50...60 Hz Nominal input current 0.38 Input voltage 230 Vac Nominal input power 86 W Power factor 0.9 Total harmonic distortion 20 @ full load. See graph. Efficiency 88 @230V @ full load Nominal input voltage D 186...250 Vdc Nominal input current D 0.38 Input voltage 230 Vdc, full load Input voltage 202...254 Vac Operational range Input frequency 47.5...63 Hz Maximum permissible range Input voltage D 168...275 Vdc Maximum permissible range Isolation Input to Output SELV @230V @ full load @230V @ full load @ full load. See graph. Electrical output data Regulation method onstant urrent Output voltage 27...54 Vdc Output voltage max. 60 V Peak voltage at open load Output current 0.7...2 Full output current setting Output current tolerance ±5 Output current ripple LF 20 Ripple = peak / average Output power 21...75 W Full output ontrol method Touch and DLI diing Diing range 1...100 >300m 1 diing; < 300m min. current 14m Electrical data controls input Logistical data Product name Order code 871829171069100 Logistic code 12N 9290 008 70403 EN3 8718291710707 Pieces per box 12 2/7
Wiring & onnections Input wire cross-section 0.5...1.5 2 WGO744, solid wire 16...20 WG WGO744, solid wire Input wire strip length 8...9 Output wire cross-section 0.5...1.5 2 WGO744, solid wire 16...20 WG WGO744, solid wire Output wire strip length 8...9 Maximum cable length 4000 Total length of wiring including LED module, one way Dimensions and weight Length (1) 424 Width (1) 30 Height (1) 25.7 Fixing hole diameter (D1) 4.1 Fixing hole distance (2) 415 Weight 362 gram 3/7
Operational temperatures and humidity mbient temperature -20...+50 Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 75 Maximum temperature measured at Tcase-point Tcase-life 75 Measured at Tcase-point Maximum housing temperature 110 In case of a failure Relative humidity 10...90 Non-condensing mbient temperature -25...+85 Relative humidity 5...95 Non-condensing Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. exceeded. Storage temperature and humidity Lifetime Maximum failures = 10 Prograable features Remark Set output current (O) Rset2 See Design-in guide. Default output current: 700 m LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering No Diagnostics No urrent output decreased to 15 Features Open load protection Remark utomatic recovering Short circuit protection utomatic recovering Over power protection utomatic recovering Hot wiring Suitable for fixtures with protection class I and II per IE60598 ertificates and standards pproval marks / E / ENE Ingress Protection classification 20 4/7
Inrush current Inrush current Ipeak 4.6 Input voltage 230V Inrush current Twidth 900 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16 type 24 pcs M Rating Relative number of LED drivers 10 63 13 81 16 100 (stated in datasheet) 20 125 25 156 10 104 13 135 16 170 20 208 25 260 Driver touch current Typical touch current 0.7 m peak cc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 cc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 cc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us ontrol surge iunity (diff. mode) 1 cc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us ontrol surge iunity (co. mode) 2 cc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us dvised NT type Vishay 15kOhm±2NT 238161554153 Surge iunity Module Temperature Protection Murata NP15XW153E03R NP15XW153E03R With 390Ω in series NT resistance threshold 2966 Ω Start limiting output current orresponding temperature 70 With advised type 238161554153 5/7
NT resistance versus output current Graphs Operating window Power factor versus output power 6/7
Efficiency versus output power 2016 Philips Lighting.V. ll rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: June 21, 2016 www.philips.com/technology