NOTE ACCT #41211 MTR # ACCT #41212 MTR # ACCT #41210 MTR # ACCT #41213 MTR # ACCT #41209 MTR # ACCT #41214 MTR #728841

Similar documents
Granite Shoals, TX San Antonio, TX 78251

TABLE OF CONTENTS. Section 2.0 GENERAL PLAN REQUIREMENTS 05/2011. Section 100 ROADWAY DESIGN 01/2016

ODOT TOTAL LABOR MATERIAL LABOR/MAT'L ITEM NO. DESCRIPTION ITEM QTY. UNIT ONLY ONLY ONLY TOTAL

Karvo Paving Company Hudson Drive Stow, OH Unit Price Labor & Material Total Unit Price Labor Unit Price Material

CONSTRUCTION & DEVELOPMENT MANUAL SUMTER COUNTY, FLORIDA

Town North Sanitary Sewer Renewal PROJECT NO. WUSR09002 Gra-Tex Utilities, Inc Jackson Construction LTD ARK Conracting Services, LLC Tri-Tech Constru

Mount Pleasant Waterworks. Cross-Connection Control Program Guidelines October 2010

EX. 8" PVC WATER MAIN EXISTING FIRE HYDRANT TO REMAIN LOS RIOS ST. N02 22' 25"W 43.75' S89 35' 25"E 14.98' N02 16' 42"W ' N02 22' 25"W 42.

ORDINANCE NO APPROVING A MAILBOX ORDINANCE FOR SHAWANO COUNTY

KANABEC COUNTY HIGHWAY DEPARTMENT Chad T. Gramentz, P.E. County Engineer 903 Forest Avenue East Mora, MN

A - Campus Emergency Phone System

UTILITY REPORT FOR THORNTON SELF STORAGE THORNTON, COLORADO

CITY OF CORINTH, TEXAS WIRELESS SERVICES (SMALL CELLS) DESIGN MANUAL

ContainTech Polypropylene Dimensional Data Expertise in Engineered Plastics Dated

SPECIFICATIONS - DETAILED PROVISIONS Section Pre-Construction Audio Video Recording Pipelines and Roadways C O N T E N T S

CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES

Parametric Piping Models. Naveed Anwar July 2003

DUKE UNIVERSITY DESIGN & CONSTRUCTION STANDARDS

Appendix C.6. Best Management Practices for Construction Activities

SYLLABUS FOR PLUMBING & SANITARY TRADE

ARLINGTON COUNTY, VIRGINIA. County Board Agenda Item Meeting of September 20, 2014

EXTRA TERRITORIAL ZONING COMMISSION CASE ANALYSIS

Meter Enclosure and Equipment Standards

Vista del Sol Drive Improvements Bid Date: February 23, 2017 Camino Real Regional Mobility Authority ATKINS NORTH AMERICA

SPECIFICATIONS - DETAILED PROVISIONS Section Pre-Construction Audio Video Recording Above Ground Facilities C O N T E N T S

DELAWARE COUNTY SECONDARY ROAD DEPARTMENT POLICY AND PROCEDURE MEMORANDUM

Backflow E-Report User Manual

Computer Network Design Guide Existing Systems 1 / 6

Rural Utilities Portal RUP

VAREC 5000/5010 SERIES FLAME ARRESTERS

Sanitation District Nos. 14 and 20 of Los Angeles County Recycled Water Users Handbook TAB 9. Districts Site Inspection Response Form

HG-1 FLUSHING SYSTEM WITH BUILT-IN (NODE) or BLUETOOTH PROGRAMMING CONSTRUCTION

the City of Palm Bay Brevard County Florida held on November

Access Field Entrance Other Constructed Yes (Type)

Airetool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders

Section 3.0 Financial Requirements

PASSED by the City Council of the City of Bremerton, Washington this

Application for Utility Services

Manzanita Pubic Works. 10/16/2018 Special Meeting

Construction Guidelines. for Providing Communications Services

USING UNIT COSTS FOR REIMBURSABLE UTILITY RELOCATIONS

DEE JASPAR & ASSOCIATES, INC. CONSULTING CIVIL ENGINEERS 2730 UNICORN ROAD, BLDG A BAKERSFIELD, CA PHONE (661) FAX (661)

PV-MOLD Nonmetallic Pole Riser System

Table of Contents: Pressure Vessel Codes & Registrations: Manufacturing Capabilities: Engineering Capabilities: Paint Specifications:

Webb Core Cleanroom Wall System

Air-Pro Blue Polyethylene (PE) Compressed Air Piping System

SharkBite 25 W ARRANTY Sh YEAR arkbite

Series P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series

Bottom Loading & Recirculation Adapters

HYDRO-GUARD. Remote Pressure Monitoring System. Reliable Connections. operating Instructions manual. Installation and Site Evaluation 2-3

UW Purchase Specification Section Central Cooling Water Meter Page 1 of 6

FIBER OPTIC HARDWARE STEVE PAULOV

A Utility Deviation Request was submitted for County Barn Villas - WM vertical separation.

Applicant Type (Conditional Use Permit, Variance, Tract Map, etc.): Applicant: Address: Phone(s): Fax:

CURRICULUM FOR SIX MONTH CERTIFICATE COURSE FITTING & PLUMBING UNDER DEVELOPMENT. Prepared By CURRICULUM DEVELOPMENT CELL

MC-1 OPERATION MANUAL MINI CAMERA JW FISHERS MFG INC 1953 COUNTY ST. E. TAUNTON, MA USA

PVC SOLVENT WELD SEWER & DRAIN FITTINGS

PP-R & PVC-U Products Catalogue

BS up.v.c SOIL, WASTE, VENT PIPES AND FITTINGS

QV-Box Series AB-4 Rev2. Soldering. Controller. Manual

COMMISSION POLICY POLICY #9.16

ASSE PROFESSIONAL CERTIFICATION PROGRAMS PROCTOR GUIDE

Pressed for time? JUST PRESS, CRIMP AND SAVE.

SENATE, No STATE OF NEW JERSEY. 217th LEGISLATURE INTRODUCED DECEMBER 12, 2016

MODEL 245 / 345 High Range

White Paper. Re-enterable Plug and Play Fiber Access Terminals. ABSTRACT INTRODUCTION COMMON TYPES OF FIBER ACCESS TERMINALS

2.4Meter Series 1252 Az/El Truss Mount

PERFORMANCE SPECIFICATION SHEET SWITCH, ASSEMBLIES, SENSITIVE, INTERLOCK, UNSEALED

METRIC MIL-C-83522/16B w/amendment 1 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET

ADA Compliance Checklist Guidance

Pressed for time? JUST PRESS, CRIMP AND SAVE.

PROSPECTUS ALTERATION PHILLIP BURTON FEDERAL BUILDING & U.S. COURTHOUSE SAN FRANCISCO, CA

American Society of Sanitary Engineering Seal (Certification) Program

INSTALLATION INSTRUCTIONS

Table Of Contents. Tyson Gentz General Manager Electrical Services of Arizona. Training & Consulting. Custom Fabrication. Temporary Power Stations 4

Baltimore City Department of Public Works

Technical Data. Care and Maintenance

BID ISSUE DATE: JUNE 2016

SAN ANTONIO WATER SYSTEM. Infrastructure Planning GIS / Mapping Division CADD STANDARDS

PVC DWV Drain Waste Vent Fittings

1.8 METER SERIES 1194 ANTENNA SYSTEM

Training Requirements. Quality Control Personnel Training

Effective Fire and Smoke Barrier Management. BICSI NE 2006 Presented by John P. Sinisi

TRAINING GUIDE. Lucity Mobile In Depth

Technical Data. Care and Maintenance

UtilityScan. Quick Start Guide. A Fast Check List For Field Operation

SECTION A. Tempered Glass Free Standing Swing Gate Post Assemblies.

SECTION [13200] FRAMED 2000 CLEANROOM WALL SYSTEM

Y K Modem Module

Newbury Street Water Main Replacement Project

Mailbox Installation and Damage Replacement Policy

DR-18 Gasketed C900 & C907 Fittings ENGINEERED FOR DURABILITY

Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4" 12" Fabricated in Sizes 15" 36"

Application for Water and/or Sewer Connections

PVC PRESSURE SYSTEMS. Fittings / Pipes

Client Utility Package

3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide

M215 Microinverter Installation Planning

MULTI-GARD PVC RACEWAY

Addendum No.1 to: Engineering Request for Proposals BJWSA Project CIP #2185 Galvanized Water Line Replacement Phase I Program Management Contract

Transcription:

The Contractor shall notify the Inspection Division at the LVVWD (702-258-3227) 48 hours prior to the requested removal time to allow the District to take the final meter reading. After the final reading the Contractor may then begin removal procedures for the affected service as follows: Existing service laterals that are to be abandoned from the existing water mains shall have the corporation stops turned off at the main, a minimum of twelve (2) inches of the lateral cut out near the corporation stops, and a brass cap installed on the corporation stop. If the corporation stop is damaged beyond repair or pulled from the existing water main, the main shall be repaired at the Contractor's expense, in a manner approved by the District. If the corporation stop is not water tight, the Contractor shall notify LVVWD Communication Support Center at (702-258-77) for further direction. The existing meter(s) shall be removed and delivered to the District. The Contractor shall remove the existing service meter box and appurtenances, fill and grade any and all resulting voids, and replace or restore to original conditions or better, all landscaping, irrigation systems, concrete, sidewalks, asphalt, or any other items damaged or removed during the removal of the existing service meter box. ACCT #42 MTR #768849 ACCT #422 MTR #669225 ACCT #4209 MTR #667873 ACCT #420 MTR #869955 ACCT #423 MTR #874473 ACCT #424 MTR #72884 ACCT #4207 MTR #949289 ACCT #4208 MTR #66939 NOTE

ACCT #425 MTR #643233 ACCT #426 MTR #668483 ACCT #427 MTR #857948 ACCT #42 MTR #9074 ACCT #429 MTR #740783 ACCT #4220 MTR #684435 ACCT #422 MTR #74447 NOTE

ACCT #48 MTR #703427 ACCT #476 MTR #64202 ACCT #467 MTR #754309 ACCT #94437 MTR #636844 ACCT #489 MTR #86935 ACCT #490 MTR #722457 ACCT #643655 MTR #807068 ACCT #485 MTR #62848 ACCT #488 MTR #73467 AND BACKFLOW DEVICE PER NOTE METER (LARGER THAN 2") PER NOTE The Contractor shall notify the Inspection Division at the LVVWD (702-258-3227) 48 hours prior to the requested removal time to allow the District to take the final meter reading. After the final reading, the Contractor may then begin removal procedures for the affected service as follows: All valves to be abandoned shall be abandoned in the closed position, unless shown otherwise, by removing a minimum of the top twenty-four (24) inches of the valve box, and then filling the bottom of the box with a minimum of eight (8) inches of sand or Type II aggregate base, the remaining portion of the valve box shall be filled with concrete having a compressive strength of at least two-thousand (2,000) psi. If the valve is to be abandoned in the closed position, the lateral must be cut within one () foot of the abandoned valve, or as shown on plans, and capped. Where a joint or coupling in the existing pipe is uncovered at the cut and cap locations, the installation of a plug may be permitted with District approval. The Contractor shall install a concrete thrust block in accordance with the provisions of the UDACS Plate No. 3 at all cap or plug locations. The existing meter(s) shall be removed and delivered to the District. The Contractor shall then remove and/or backfill the abandoned vault with Type II material.

ACCT #493 MTR #60748 REMOVE POLE ACCT #57803 MTR #875044 RELOCATE AIR VENT BEHIND S/W (Extension of Existing Lateral) The Contractor shall remove and relocate both the upper and lower barrels of the existing fire hydrant(s) where shown, extend the existing lateral as required, and reinstall such hydrant(s) at the new location(s) indicated. Fire hydrants shall be tested prior to and after relocation, under the direction of the District, to ensure quality. Installation shall be in accordance with UDACS Plate 40. Laterals made of unapproved materials shall be replaced from the main to the fire hydrant. Relocations where the lateral cannot be extended shall be treated as new installations. ADJUST BLOW OFF TO FIT IN ROADWAY PER UDACS PLATE #37 ADJUST TEST STATION IN NEW S/W RELOCATE EXISTING FIRE HYDRANT PER NOTE AND BACKFLOW DEVICE PER NOTE METER (LARGER THAN 2") PER NOTE

ACCT #57802 MTR #N/A ACCT #5780 MTR #5075 ABANDON OR REMOVE GV ACCT #340 MTR #62654 ACCT #589907 MTR #26384 4" DCDA ACCT #3092 MTR #86703 CUT & CAP LATERAL ACCT #309 MTR #80904 IS THERE WORK BEING DONE IN THIS SECTION OF RW? RPPA DCDA ACCT #30 MTR #703485 ACCT #3 MTR #633267 ACCT #307 MTR #832833 ACCT #306 MTR 743394 ACCT #305 MTR 786587 AND BACKFLOW DEVICE PER NOTE

METER CANNOT REMIAN IN THIS LOCATION IF IT WILL BE A NEW ROADWAY ACCT #338 ACCT #0938 MTR #728426 INSTALL 8" PVC PER UDACS PLATE # & #9 ACCT #339 ACCT #0937 ACCT #94436 MTR #849753 ABANDON VALVE 2 ACCT #0935 MTR #77669 REMOVE TRANSITION COUPLING AND CONNECT TO 6" PVC WITH 8"X6" REDUCER AND 8" 45 BEND AND BACKFLOW DEVICE PER NOTE

RELOCATE EXISTING FIRE HYDRANT PER NOTE AND BACKFLOW DEVICE PER NOTE ABANDON EX WATER EX 6" ACP W MTR #420209 MTR #762 MTR #90206 MTR #849320 ACCT #32 MTR #252927 ACCT #9378 MTR #7684 2 2 DESIGN NEW WATERLINE IN NEW ROADWAY PER UDACS. ABANDON VALVE 2 PRIVATE BACKFLOW DEVICE ABANDON WATER IN PLACE MTR #645725 DESIGN NEW WATERLINE IN NEW ROADWAY PER UDACS. MTR #650486

RELOCATE EXISTING FIRE HYDRANT PER NOTE REMOVE WATER METER AND BACKFLOW DEVICE PER NOTE PRIVATE FH ACCT #49974 MTR #8008 ACCT #3526 MTR #283573 ACCT #49973 MTR #647567 ABONDON GV ACCT #9390 MTR #678352 DESIGN NEW WATERLINE IN NEW ROADWAY PER UDACS. 2

NOTES MTR #377475 MTR #35206

ACCT #60599 MTR #947362 MTR #87386 All valves to be abandoned shall be abandoned in the closed position, unless shown otherwise, by removing a minimum of the top twenty-four (24) inches of the valve box, and then filling the bottom of the box with a minimum of eight (8) inches of sand or Type II aggregate base, the remaining portion of the valve box shall be filled with concrete having a compressive strength of at least two thousand (2,000) psi. The lateral must be cut within one () foot of the abandoned valve, or as shown on plans, and capped. The Contractor shall cut the existing pipe where shown on the drawing and install a cap complete with thrust block. Where a joint or coupling in the existing pipe is uncovered at the cut and cap locations, the installation of a plug may be permitted with District approval. A concrete thrust block shall be installed at all cap or plug locations in accordance with the provisions of UDACS Plate 3. MTR #857739 MTR #605803 MTR #596772 MTR #66356 MTR #892700 MTR #29648 MTR #8962 MTR #90337 (Existing Lateral to be Abandoned) Where shown on the drawing(s), the Contractor shall abandon the existing fire hydrant(s) by removing both the upper and lower barrels of the fire hydrant so that no portion of the remaining fire hydrant assembly is closer than two (2) feet to the existing grade. Fire hydrants shall be tested prior to and after relocation under the direction of the District to ensure quality of the fire hydrant(s). The existing hydrant shall be installed at the new location as indicated on the drawing, in accordance with UDACS Plate 40. The existing valve shall be abandoned in a closed position, unless shown otherwise, by removing a minimum of the top twenty-four (24) inches of the valve box, and then filling the bottom of the box with a minimum of eight (8) inches of sand or Type II aggregate base, the remaining portion of the valve box shall be filled with concrete having a compressive strength of at least two-thousand (2,000) psi. The lateral shall be cut within one () foot of the abandoned valve, or as shown on plans, and capped. Where a joint or coupling in the existing pipe is uncovered at the cut and cap location, the installation of a plug may be permitted, with District approval. A concrete thrust block shall be installed at all cut and cap locations in accordance with the provisions of UDACS Plate 3. MTR #647964 RELOCATE EXISTING FIRE HYDRANT PER NOTE NOTE

ACCT #525330 ACCT #4240 MTR #6565 MTR #848589 MTR #525099 MTR #703279 MTR #622488 MTR #862853 MTR #66066 MTR #5223 MTR #923986 ABANDON GV METER (LARGER THAN 2") PER NOTE

ACCT #983 MTR #905728 ACCT #984 MTR #823722 ACCT #999 MTR #85096 ACCT #2890 MTR #483968 ACCT #979 MTR #275082 ACCT #980 MTR #535590 ACCT #98 MTR #907722 ACCT #982 MTR #746433 ACCT #998 MTR #905856 ACCT #3489 & #34890 ACCT #34892 ACCT #997 MTR #632793 ACCT #30850 MTR #65636 ACCT #987 MTR #7376 ACCT #988 MTR #959904 ACCT #989 MTR #905750 ACCT #990 MTR #90575 ACCT #99 MTR #90668 ACCT #992 MTR #785978 ACCT #993 MTR #789880 ACCT #994 MTR #608482 ACCT #996 MTR #80606 ACCT #34888 ACCT #34889 ACCT #34887 ACCT #995 MTR #32240 3 MTR #424792 UPDATE

ACCT #9270 MTR #33804 UPDATE ACCT #375 ACCT #346 ACCT #3752 ACCT #3753 3 ACCT #356 ACCT #355 ACCT #354 ACCT #353 ACCT #352 ACCT #350 ACCT #349 ACCT #348 ACCT #347 ACCT #345 ACCT #343 ACCT #34886 ACCT #3754 ACCT #3755 ACCT #3756 ACCT #360 ACCT #359 ACCT #344 ACCT #342 ACCT #34 UPDATE

ACCT #38768 ACCT #38767 ACCT #38766 ACCT #3877 ACCT #38769 MTR #377673 ACCT #28906 ACCT #38770 ACCT #96424 ACCT #2996 MTR #692407 MTR #928998 MTR #929380

2 ACCT #33452 2 PRIVATE FH FIRE DEPARTMENT APPROVAL REQUIRED

UPDATE LOCATION ACCT #53575 ACCT #53576 LVVWD WM ACCT #9387 PRIVATE

LIMIT OF PAVING? FH LVVWD