L () F Product Substitution Details - Safety Modules XPS modules - Replacement of the GSKC by the XPSK unit F2 L2 XPSK GSKC S () (-) S3 S32 2 3 23 T/33 T2 T2 T22 3 23 33 4 Y64 Y74 External jumper K- fuse GSKC XPSK T/33 T34 4 24 Y Y2 N (-) start K K 4 24 34 42 Y3 Y32 Y54 N F3 24Vdc to PLC Preventa Safety Solutions 44
Operating principle, characteristics Preventa safety modules type Operating principle Safety modules meet the requirements of Performance Level PL e/category 4 conforming to standard EN/ISO 3849-. They are used for: b Monitoring Emergency stop circuits conforming to standards EN/ISO 385 and EN 624-. b Electrical monitoring of switches activated by protection devices, with optional selection of synchronisation time between signals. b Monitoring 4-wire sensing mats or edges. b Monitoring type 4 light curtains conforming to EN/IEC 6496- which have solidstate safety outputs with test function (light curtains XUS L). Housed in a compact enclosure, the modules have 3 safety outputs, a relay signalling output and 4 solid-state signalling outputs for signalling to the process PLC. Preventa safety modules ppppp incorporate removable terminal blocks, thus optimising machine maintenance. To aid diagnostics, the modules have 4 LEDs on the front face which provide information on the monitoring circuit status. The button monitoring function is con gurable depending on the wiring. Characteristics Module type 3p44 3p44P Maximum achievable safety level PL e/category 4 conforming to EN/ISO 3849-, SILCL 3 conforming to EN/IEC 626 Reliability data Mean Time To dangerous Failure (MTTF d) Years 54.5 Diagnostic Coverage (DC) % > 99 Probability of dangerous Failure per Hour (PFH d) /h 7.39 x -9 Conformity to standards EN/IEC 624-, EN 88/ISO 49, EN/ISO 385, EN/IEC 6947-, EN/IEC 6947-5- Product certifications UL, CS, TÜV Voltage V a and 24 c, 48 a, a and 24 c, 2 a and 24 c, 23 a and 24 c Voltage limits - 5 % Frequency Hz 5/6 Consumption 24 V version V y 5 Module inputs fuse protection button monitoring /2/23 V versions y 6 Control unit and current between terminals -2, S3-S32 Maximum wiring resistance RL between terminals -2, S3-S32 Synchronisation time between inputs and (terminals -2, S3-S32) 28 Outputs Voltage reference Volt-free Electrical durability s Internal, electronic Yes/No (con gurable by terminal connections) /3 m approx. (at nominal supply ) Number and type of safety circuits 3 NO (3-4, 23-24, 33-34) Number and type of additional circuits utomatic start: 2 or 4 depending on wiring Manual start (start button between and ): unlimited NC (4-42) 4 solid-state reaking capacity in C-5 V C3: inrush 8, maintained 8 reaking capacity in DC-3 reaking capacity of solid-state outputs Max. thermal current (Ithe) 6 Max. total thermal current 8 24 V/.5 - L/R = 5 ms 24 V/2 m, 48 V/ m Output fuse protection 4 gg or 6 fast acting, conforming to IEC/EN 6947-5-, DIN VDE 66 part 2 Minimum current m Minimum V 7 Response time on input opening ms 4 See page 386-EN/2 Rated insulation (Ui) V 3 (degree of pollution 2 conforming to IEC/EN 6947-5-, DIN VDE parts & 2) Rated impulse withstand (Uimp) kv 4 (over category III, conforming to IEC/EN 6947-5-, DIN VDE parts & 2) LED display 4 Operating temperature C - 55 Storage temperature C - 25 85 Degree of protection Conforming to IEC 6529 Terminals IP 2 Enclosure IP 4 References: page 38782-EN/3 Connections: page 38782-EN/P Dimensions: page 3873-EN/2 2
Characteristics, references Preventa safety modules type Characteristics (continued) Module type 3p44 3p44P Connections Type Terminals Captive screw clamp terminals Captive screw clamp terminals References Terminal block Integrated in module Removable from module -wire connection Without cable end Solid or exible cable:.4 2.5 mm 2 Solid or exible cable:.2 2.5 mm 2 With cable end Without bezel, exible cable:.25 2.5 mm 2 With cable end With bezel, exible cable:.25.5 mm 2 With bezel, exible cable:.25 2.5 mm 2 2-wire connection Without cable end Solid or exible cable:.4.75 mm 2 Solid cable:.2 mm 2, exible cable:.2.5 mm 2 Description With cable end Without bezel, exible cable:.25 mm 2 With cable end Double, with bezel, exible cable:.5.5 mm 2 Safety modules for Integrated Emergency stop, switch, in module sensing mat/edges or safety light curtain monitoring Type of terminal Number block connection of safety circuits Outputs: dditional / Solid-state for PLC 3 / 4 24 V a Reference Weight kg 344.3 V a 3644.4 3p44 2 V a 3544.4 23 V a 3744.4 Removable from module 3 / 4 24 V a 344P.3 48 V a 3344P.3 V a 3644P.4 2 V a 3544P.4 23 V a 3744P.4 3
Connections Preventa safety modules type Emergency stop monitoring function configuration -channel wiring Emergency stop button with a single NC contact 2-channel wiring Emergency stop button with 2 NC contacts, without short-circuit detection Emergency stop button with 2 NC contacts, with short-circuit detection (recommended application) 2 S3 S32 2 S3 S32 2 S3 S32 Not all faults are detected: a short-circuit on the Emergency stop pushbutton is not detected. Connection of multiple Emergency stop buttons with 2 NC contacts (recommended application) configurations utomatic start The 2 input channels are supplied at different potentials. short-circuit between the 2 inputs is detected. With start button monitoring 2 S3 S32 3 4 3 4 S3 The 2 input channels are supplied at different potentials. short-circuit between the 2 inputs is detected. Proximity sensor monitoring Proximity sensors with PNP outputs Without short-circuit detection Proximity sensors with NPN and PNP outputs With short-circuit detection Sensing mat or edges monitoring PNP PNP - - PNP 2 S3 S32 2 S3 S32 2 S3 S32 NPN V V 4
Connections (continued) Preventa safety modules type Monitoring of a movable guard associated with 2 switches with contact each in combined mode (switch with NO contact, switch 2 with NC contact) utomatic start, without synchronisation time monitoring Manual start by button Guard closed Guard closed 2 S3 S32 3 4 2 S3 S32 3 4 Monitoring of a movable guard associated with 2 switches and automatic start (shown with guard open) 2 S3 S32 3 4 Functional diagram of outputs Outputs 2 s 4 s Module associated with an Emergency stop button with 2 NC contacts L F (24 V) 2 S3 S32 3 4 3 23 K Logic 33 4 Y64 Y74 K/ Fuse () 2 4 24 ( ) 34 42 Y3 Y32 Y54 ESC N connection according to : a across terminals /, or across terminals /2. () Operating status of internal electronic fuse. ESC: External start conditions. 5
Connections (continued) Preventa safety modules type Module for monitoring electro-sensitive protection equipment (ESPE) 24 V F 24 V V OSSD ESPE outputs OSSD2 2 S3 S32 3 4 3 23 33 4 Y64 Y74 Logic K K/ Fuse () 2 4 24 34 42 Y3 Y32 Y54 ESC (2) V () Operating status of internal electronic fuse. (2) ESPE indicator light deactivated. ESC: External start conditions. Example of safety circuit combining module for switch monitoring and a PLC L () F Guard closed 2 S3 S32 3 4 3 23 33 4 Y64 Y74 K Logic K/ Fuse () 2 4 24 34 42 Y3 Y32 Y54 24 V S3 5 6 7 ESC s 2 3 4 5 6 7 24 V PLC Outputs 2 3 4 5 2 3 4 5 N ( ) () Operating status of internal electronic fuse. ESC: External start conditions. 6
Connections Preventa safety modules type Functional diagrams Switch monitoring function with automatic start -2 S3-S32 3-4 (NO) Output 3-4/ 23-24/33-34 (NO) Output 4-42 (NC) Guard opens 2 switch nd switch st Guard opens Switch monitoring function with automatic start and synchronisation time monitoring -2 S3-S32 3-4 (NO) Output 3-4/ 23-24/33-34 (NO) Output 4-42 (NC) Guard opens switch st 2 switch nd Guard opens 2 switch nd switch st Output (K ) Y3-Y32 Y3-Y54 Output ( ) Y3-Y64 Output ( ) Y3-Y74 t = Output (K ) Y3-Y32 Y3-Y54 Output ( ) Y3-Y64 Output ( ) Y3-Y74 t = 2 s t = 4 s Emergency stop monitoring or switch monitoring function Light curtain monitoring (ESPE) function, curtains with solid-state outputs Emergency stop or switch activated Light curtains Deactivated ctivated -2-2 S3-S32 button - (NO) Output 3-4/ 23-24/33-34 (NO) Output 4-42 (NC) OSSD (ESPE) S32 OSSD2 (ESPE) 2 button - (NO) Output 3-4/ 23-24/ 33-34 (NO) Output 4-42 (NC) Output (K ) Y3-Y32 Y3-Y54 Output ( ) Y3-Y64 Output ( ) Y3-Y74 Output (K ) Y3-Y32 Y3-Y54 Output ( ) Y3-Y64 Output ( ) Y3-Y74 Sensing mat or edge monitoring function, with monitored start LED details Walk on mat Leave mat Walk on mat -2-2 2 34 S3-S32 button - (NO) Output 3-4/ 23-24/ 33-34 (NO) Output 4-42 (NC) Output (K ) Y3-Y32 Y3-Y54 Output ( ) Y3-Y64 Output ( ) Y3-Y74 -, fuse status. 2 2 (). 3 S32 (). 4 K/ status (NO safety outputs closed). 7