Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic design achieves 10.9 mm.9 inch profile, flat type thin package., with width of mm inch, enables high-density mounting on PC boards.. High reliability Provides stable contact pressure needed for card lift-off contact driver method. The use of Ac clad twin contacts provides stable contact resistance and ensures high contact reliability. 3. Compatible with all major safety standards UL and CSA certified, and complies with Japanese Electrical Appliance and Material Control Law.. Socket and terminal are available TYPICAL APPLICATIONS 1. Gas hot air heating equipment and air conditioners. Timer and temperature controller 3. Facsimile machines and electronic counting devices. Machine tools, factory automation devices and NC machines Protective construction: Dust cover type/ Sealed type ORDERING INFORMATION : : NC Nil: Standard type EB: Sealed type D: Twin (bifurcated) contact Nil: J: Flat type Nil: Plug-in type P: Nil: Nominal coil voltage DC 3, 5, 6, 1,, 8, 100V D 1 ASCTB1E 01701-T
TYPES 1. Standard type 1) Flat type Contact arrangement Nominal coil voltage 3V DC 5V DC 6V DC 1V DC V DC 8V DC 100V DC 3V DC 5V DC 6V DC 1V DC V DC 8V DC 100V DC Standard packing: Carton: 0 pcs.; Case: 00 pcs. Part No. NCD-JP-DC3V NCD-JP-DC5V NCD-JP-DC6V NCD-JP-DC1V NCD-JP-DCV NCD-JP-DC8V NCD-JP-DC100V NCD-JP-DC3V NCD-JP-DC5V NCD-JP-DC6V NCD-JP-DC1V NCD-JP-DCV NCD-JP-DC8V NCD-JP-DC100V ) Contact arrangement Nominal coil voltage Plug-in type Part No. Part No. 3V DC NCD-DC3V NCD-P-DC3V 5V DC NCD-DC5V NCD-P-DC5V 6V DC NCD-DC6V NCD-P-DC6V 1V DC NCD-DC1V NCD-P-DC1V V DC NCD-DCV NCD-P-DCV 8V DC NCD-DC8V NCD-P-DC8V 100V DC NCD-DC100V NCD-P-DC100V 3V DC NCD-DC3V NCD-P-DC3V 5V DC NCD-DC5V NCD-P-DC5V 6V DC NCD-DC6V NCD-P-DC6V 1V DC NCD-DC1V NCD-P-DC1V V DC NCD-DCV NCD-P-DCV 8V DC NCD-DC8V NCD-P-DC8V 100V DC NCD-DC100V NCD-P-DC100V Standard packing: Carton: 0 pcs.; Case: 00 pcs.. Sealed type 1) Flat type Contact arrangement Nominal coil voltage 3V DC 5V DC 6V DC 1V DC V DC 8V DC 100V DC 3V DC 5V DC 6V DC 1V DC V DC 8V DC 100V DC Standard packing: Carton: 0 pcs.; Case: 00 pcs. Part No. NCEBD-JP-DC3V NCEBD-JP-DC5V NCEBD-JP-DC6V NCEBD-JP-DC1V NCEBD-JP-DCV NCEBD-JP-DC8V NCEBD-JP-DC100V NCEBD-JP-DC3V NCEBD-JP-DC5V NCEBD-JP-DC6V NCEBD-JP-DC1V NCEBD-JP-DCV NCEBD-JP-DC8V NCEBD-JP-DC100V ASCTB1E 01701-T
) Contact arrangement Nominal coil voltage Standard packing: Carton: 0 pcs.; Case: 00 pcs. * Sockets and terminal sockets available. Plug-in type Part No. Part No. 3V DC NCEBD-DC3V NCEBD-P-DC3V 5V DC NCEBD-DC5V NCEBD-P-DC5V 6V DC NCEBD-DC6V NCEBD-P-DC6V 1V DC NCEBD-DC1V NCEBD-P-DC1V V DC NCEBD-DCV NCEBD-P-DCV 8V DC NCEBD-DC8V NCEBD-P-DC8V 100V DC NCEBD-DC100V NCEBD-P-DC100V 3V DC NCEBD-DC3V NCEBD-P-DC3V 5V DC NCEBD-DC5V NCEBD-P-DC5V 6V DC NCEBD-DC6V NCEBD-P-DC6V 1V DC NCEBD-DC1V NCEBD-P-DC1V V DC NCEBD-DCV NCEBD-P-DCV 8V DC NCEBD-DC8V NCEBD-P-DC8V 100V DC NCEBD-DC100V NCEBD-P-DC100V RATING 1. Coil data No. of poles Nominal coil voltage 3V DC Pick-up voltage (at 0 C 68 F) Drop-out voltage (at 0 C 68 F) Nominal operating current [±10%] (at 0 C 68 F) Coil resistance [±10%] (at 0 C 68 F) Nominal operating power 10mA 5Ω 360mW 5V DC 7mA 69.Ω 360mW 6V DC 60mA 100Ω 360mW 1V DC 80%V or less of 10%V or more of nominal voltage nominal voltage 30mA 00Ω 360mW V DC (Initial) (Initial) 15mA 1,600Ω 360mW 8V DC 7.5mA 6,00Ω 360mW 100V DC 7.mA 13,500Ω 70mW 3V DC 0mA 1.5Ω 70mW 5V DC 1mA 3.7Ω 70mW 6V DC 80%V or less of 10%V or more of 10mA 50Ω 70mW 1V DC nominal voltage nominal voltage 60mA 00Ω 70mW V DC (Initial) (Initial) 30mA 800Ω 70mW 8V DC 15mA 3,00Ω 70mW 100V DC 7.mA 13,500Ω 70mW * At 0 C 68 F (Sealed type) Max. applied voltage (at 50 C 1 F)* 135%V of nominal voltage 110%V of nominal voltage 110%V of nominal voltage 3 ASCTB1E 01701-T
. Specifications Characteristics Item Specifications Contact Rating Electrical characteristics Mechanical characteristics Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. 3. Electrical life Condition: Resistive load Arrangement Contact resistance (Initial) Max. 50 mω (By voltage drop 6 V DC 1A) Max. 50 mω (By voltage drop 6 V DC 1A) Contact material Au-clad AgNi type Au-clad AgNi type Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Standard: 5A 50V AC, 5A 30V DC Sealed: 3A 50V AC, 5A 30V DC Standard: 1,50VA, 150W Sealed: 750VA, 150W 50 V AC Standard: 5A Sealed: 3A (AC), 5A (DC) Standard: A 50V AC, 5A 30V DC Sealed: A 50V AC, 5A 30V DC Standard: 1,000VA, 150W Sealed: 500VA, 150W Standard: A Sealed: A (AC), 5A (DC) Min. switching capacity (Reference value)* 1 100μA 1V DC 100μA 1VDC Insulation resistance (Initial) Breakdown voltage (Initial) Between open contacts Between contact sets Between contact and coil Min. 100MΩ (at 500V DC) Measurement at same location as Breakdown voltage section. 1,000 Vrms for 1min. (Detection current: 10mA.) 1,000 Vrms for 1min. (Detection current: 10mA.),000 Vrms for 1min. (Detection current: 10mA.) Operate time (at 0 C 68 F) Max. 0ms Max. 0ms Release time (at 0 C 68 F) Max. 10ms Max. 10ms Shock resistance Vibration resistance Functional Destructive Min. 98 m/s (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.) Min. 980 m/s (Half-wave pulse of sine wave: 6 ms.) Functional 10 to 55 Hz at double amplitude of 1 mm (Detection time: 10μs.) Destructive 10 to 55 Hz at double amplitude of mm Expected life Mechanical Min. 5 10 7 Min. 5 10 7 Conditions Conditions for operation, transport and storage* (Not freezing and condensing at low temperature) 0 C to +70 C 0 F to +158 F (Max.8V DC), 0 C to +55 C 0 F to +131 F (100V DC) Unit weight 16 g.56 oz 18 g.63 oz 0 C to +55 C 0 F to +131 F Types Switching capacity No. of operations Standard type Sealed type Standard type Sealed type 5A 30V DC Min. 5 10 5 5A 50V AC Min. 1 10 5 5A 30V DC Min. 5 10 5 3A 50V AC Min. 1 10 5 5A 30V DC Min. 5 10 5 A 50V AC Min. 1 10 5 5A 30V DC Min. 5 10 5 A 50V AC Min. 1 10 5 ASCTB1E 01701-T
REFERENCE DATA (Standard type) 1.-(1) Life curve (, ) 1.-() Life curve () 1.-(3) Life curve () 10,000 110 V DC resistive 5,000 5,000 Expected life, 10 1,000 0 V DC resistive 100 Expected life, 10 1,000 100 50 V AC resistive 50 V AC inductive (pf=) Expected life, 10 1,000 100 15 V AC resistive 50 V AC resistive 15 V AC inductive (pf=) 50 V AC inductive (pf=) 30 V DC resistive 0.1 1.0 10 Contact carrying current, A 10 0 1 3 5 Contact carrying current, A 10 0 1 3 5 Contact carrying current, A. Temperature rise characteristics (single side stable) Measured portion: Inside the coil Temperature rise, C 80 70 60 50 0 30 0 Operating power Coil voltage C : up to ( 8 V DC ) C : 100 V DC ( C : all types ) 5 A (Contact carring current) 3 A (Contact carring current) 5 A (Contact carring current) 3 A (Contact carring current) C C 0.6 1.0 1. 1. 1.6 1.8W 100 10 10 160 180 00 0%V 100 110 10 130 10 150%V 3. Operate time (single side stable). Release time (single side stable) Operate time, ms 0 18 16 1 1 10 8 6 c c Max. Max. Min. Min. 80 90 100 110 Coil applied voltage,%v Release time, ms 5 3 1 c c Max. Min. Max. Min. 80 90 100 110 Coil applied voltage,%v 5.-(1) Rate of change of pick-up and drop-out voltage ( single side stable) 10 5.-() Rate of change of pick-up and drop-out voltage ( single side stable) 10 Rated of change, % 110 100 90 Pick-up voltage Rated of change, % 110 100 90 Pick-up voltage 80 Drop-out voltage 80 Drop-out voltage 0 0 0 0 0 60 80 Ambient temperature, C 0 0 0 0 0 60 80 Ambient temperature, C 6.-(1) Ambient temperature vs Max. applied voltage Tested sample: NCD-P-DC V ( slim single side stable) 6.-() Ambient temperature vs Max. applied voltage Tested sample: NCD-P-DC110 V ( slim single side stable), NCD-P-DC V ( slim single side stable) Max. applied voltage, %V 50 00 150 0 A (Contact carring current) 3 A (Contact carring current) 5 A (Contact carring current) Max. applied voltage, %V 50 00 150 0 A (Contact carring current) 3 A (Contact carring current) 5 A (Contact carring current) 100 0 50 60 70 Ambient temperature, C 100 30 0 50 Ambient temperature, C 5 ASCTB1E 01701-T
DIMENSIONS (mm inch) The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/ac/e/ <Standard type> Flat type Schematic (Top view) PC board pattern (Bottom view) 1 13 1 11.8 dia. 8-1. dia. hole 8-.07 dia. hole + 5 7 (Deenergized position) 11 11 5. 7.9 1 7 5 5. 10.9 3.5.9.138 Flat type Schematic (Top view) 16 15 1 13 1 11 10 9 PC board pattern (Bottom view).8 dia. 1-1. dia. hole 1-.07 dia. hole + 1 5 7 8 9 10 15 16 5. 7.9 1 (Deenergized position) 11 11 10.9 3.5.9.138 8 7 5 1 Plug-in type 7.8 1.09 + 7 5.5 5..098 6.1.0 (Deenergized position) 7 6 5 3 6 ASCTB1E 01701-T
Plug-in type 7.8 1.09 9 10 15 16 + 8 7 5 1 9 10 15 16 8 7 6 5 3 1 6.1.0 (Deenergized position) PC board pattern (Bottom view) 5. 7.8 1.09.1.161 0..008 + 7 5 (Deenergized position).8 dia. 3 3 8-1. dia. hole 8-.07 dia. hole 7 5 7 6 5 3 (Dowel heigh: ) PC board pattern (Bottom view) 7.8 1.09.1.161 0..008 9 10 15 16 + 8 7 5 1 (Deenergized position).8 dia. 1-1. dia. hole 1-.07 dia. hole 3 3 9 10 15 16 8 7 5 1 8 7 6 5 3 1 (Dowel heigh: ) 7 ASCTB1E 01701-T
<Sealed type> Flat type Schematic (Top view) 1 13 1 11 PC board pattern (Bottom view).8 dia. 10-1. dia. hole 10-.07 dia. hole - + 5 7 5. 7.9 1 : Deenergized position 11 11 5. 10.9.9 3.5.138 7 5 0.5.00 Flat type Schematic (Top view) 16 15 1 13 1 11 10 9 PC board pattern (Bottom view).8 dia. 16-1. dia. hole 16-.07 dia. hole 9 10 15 16 -+ 1 5 7 8 5. 7.9 1 : Deenergized position 11 11 10.9.9 3.5.138 8 7 5 1 0.5.00 Plug-in type 5. 7.8 1.09 6.1.0.5.098 + - 7 5 : Deenergized position 8 ASCTB1E 01701-T
Plug-in type 38.9 1.531 9 10 11 1 13 1 15 16 8 7 + - 5 1 7.8 1.09 : Deenergized position.5.098 6.1.0 5. 7.8 1.09.1.161 0..008 + - 7 5 : Deenergized position PC board pattern (Bottom view).8 dia. 3 3 10-1. dia. hole 10-.07 dia. hole 7 5 0.5.00 38.9 1.531 9 10 11 1 13 1 15 16 PC board pattern (Bottom view).8 dia. 16-1. dia. hole 16-.07 dia. hole 9 10 15 16 7.8 1.09 8 7 + - 5 : Deenergized position 1 3 3 8 7 5 1 0.5.00.1.161 0..008 9 ASCTB1E 01701-T
SAFETY STANDARDS Types Standard type Sealed type UL/C-UL (Recognized) CSA (Certified) File No. Contact rating Cycles File No. Contact rating Cycles 5A 50V AC 10 5 5A 50V AC 10 5 E308 5A 30V DC 10 5 LR6550 5A 30V DC 10 5 1/10HP 15, 50V AC 1/10HP 15, 50V AC 5A 30V DC 10 5 5A 30V DC 10 5 E308 A 50V AC 10 5 LR6550 A 50V AC 10 5 1/10HP 15, 50V AC 1/10HP 15, 50V AC 5A 30V DC 10 5 5A 30V DC 10 5 E308 3A 50V AC 10 5 LR6550 3A 50V AC 10 5 1/0HP 15, 50V AC 1/0HP 15, 50V AC 5A 30V DC 10 5 5A 30V DC 10 5 E308 A 50V AC 10 5 LR6550 A 50V AC 10 5 1/0HP 15, 50V AC 1/0HP 15, 50V AC NOTES 1. For cautions for use, please read GENERAL APPLICATION GUIDELINES.. Because the NC relay is polarized, the positive + and negative connections to the coil should be done as indicated on the wiring diagram. If connected incorrectly, it may malfunction or fail to operate. 3. While NC relays can be used with any transmission-wave current to their operation, due to slight weakening of the force of magnetic attraction, decreased resistance to vibration and shock should be taken into account.. When designing top and bottom view schematic diagrams, note that: 1) Top view wiring diagram is indicated for the flat series because terminals can be seen from above. ) Bottom view schematic diagram is indicated for the vertical series because terminals cannot be seen from above. Top view Vertical series 5. Cautions for close proximity mounting When using slim series in close proximity, mount all relays facing the same direction. Different mounting directions may cause change in the relay characteristics because NC relays are polarized. Flat series Bottom view (Same direction) 10 ASCTB1E 01701-T
Automation Controls Catalog ACCESSORIES (Partial approval) (Partial approval) NC RELAYS (sockets and terminal sockets) NC Flat type socket NC Flat type socket FEATURES Socket 1) The vertical (slim) type with solder terminals has a retainer, which enables snap-in fixing on chassis, panels, and similar locations. Because the sockets for both solder terminals and PC boards firmly fix the relay at the time of insertion, once snapped in, spring clips are unnecessary. ) For the flat type, pull up the hinged clasps in the direction of the arrows shown in the drawing after inserting the relay. NC socket NC socket NC DIN terminal socket RoHS compliant TYPES Product name Terminals Part No. Flat type socket NC-flat type PC board socket P/C board NC-JPS NC-flat type PC board socket P/C board NC-JPS terminal socket NC-DIN terminal socket DIN rail NC-SFD NC-slim type socket Solder NC-SS NC-slim type PC board socket P/C board NC-PS socket NC-slim type wrapping socket Lead wire NC-WS NC-slim type socket Solder NC-SS NC-slim type PC board socket P/C board NC-PS NC-slim type wrapping socket Lead wire NC-WS SPECIFICATIONS (common) Item Specifications Max. continuous current : 5A 50V AC, Flat type: 5A 50V AC Initial breakdown voltage,000 V AC (Except for coil to coil of L type: 1,500 V AC) Initial insulation resistance Min. 100MΩ (at 500V DC megger) Heat resistance 150 C 30 F for 1 hour Note: Do not insert or remove relays while in the energized condition. 01.0 industrial.panasonic.com/ac/e/ Panasonic Corporation 01 1 ASCTB58E 010-T
Relay Sockets and DIN terminal sockets DIMENSIONS (mm inch) The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/ac/e/ Flat type socket for PC board NC-JPS 10.16.00-3.5 dia. hole -.138 dia..7.185 3.9 1.37 0.9.035 Approx..3 1.7 7.9 1 15..600 Terminal portion 3.9.15 0.5 max..00 max. PC board pattern.8 dia. 11 11 11 1 8-1. dia. hole 8-.07 dia. 13 1 5. 1.8.583 0.3 7 6 5 3 7 5 Flat type socket for PC board NC-JPS 0.3.7.185 35.56 1.00 5.0 15..600 Terminal portion 3.9.15 0.5 max..00 max. PC board pattern.8 dia. 1-1. dia. hole 1-.07 dia. 9 10 15 16-3.5 dia. hole -.138 dia. 3.9 1.37 0.9.035 Approx..3 1.7 7.9 1 9 10 15 8 7 6 5 3 1 16 11 11 8 7 5 1 0.0 1.575 1.8.583 0.3 38 1 DIN terminal socket NC-SFD 18±0.6.709±.0 Chassis mounting pitch ±0. M3 screw ±.008 M.118 67±1.638± Mounting hole diagram 67.638 Schematic 11 1 N.C. 1 13 N.O. (Retaining springs are included with the DIN terminal socket.) 15.±0..600±.008 ±0. ±.008 0.3±0.3 ±.01 0.6±0.6.811±.0 8.5±0.6 1.1±.0 35.±0.5 1.39±.00 18±0. 18±0..709±.008.709±.008 *To prevent damage or distortion, when tightening fixing screws, the optimum torque range should be 9 to 0.69 N m, (5 to 7 kgf cm). 33.5 1.319 -M3.5 screw hole (or.±0.1 dia. hole) -M.138 screw hole (or.165±.00 dia. hole) 7 5 COM Coil Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ Panasonic Corporation 01 ASCTB58E 010-T
6 5 7 8 6 5 3 8 6 NC Relay Sockets and DIN terminal sockets socket for solder terminal NC-SS B A 9.9 1.177 1.6.96 8.6 8.0.803.339.315 3.9.15 1.0 7.9 1.098 1.9.075 0.3 7 3 15..600 Chassis cutout 11.5.53 8. 1.118 Notes: 1. Suitable chassis thickness is 1.0 to.0 mm to.079 inch.. Once the socket is inserted from above into the mounting holes, the relay will snap in to clips rising from either side at (A) and (B) by pushing. socket for solder terminal NC-SS B A JAPAN 1.6.96.0 1.73 9.0 1.1 8.0 8.6.315 3.9.339.15 1.0 35.56 15. 1.00.600 5.0 13 11 1 1 15 9 10 16 7 5 3 1 0.3 38 1.0 1.65 1.9.075 Chassis cutout.5 1.673 11.5.53 Notes: 1. Suitable chassis thickness is 1.0 to.0 mm to.079 inch.. Once the socket is inserted from above into the mounting holes, the relay will snap in to clips rising from either side at (A) and (B) by pushing. socket for PC board NC-PS 1.6.96.803 3.9.15 8.6.339.6.181 1 PC board pattern.8 dia. 8-1. dia. hole 8-.07 dia. 11 1 13 1 9.9 1.177 7.9 1.098 0.3 6 5 3 0.6.0 11 1 13 1 15..600 3 3 7 5 socket for PC board NC-PS.0 1.73 1.6.96 9.0 1.1 1.5 3.9.9.15.6.181 1.0.0 1.65 38 1 0.3 7 1 9 10 11 1 13 1 15 15. 35.56.600 1.00 5.0.8 dia. 3 3 PC board pattern 9 10 11 1 15 1 13 16 7 5 8 1 1-1. dia. hole 1-.07 dia. 16 0.9.035 Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ 3 Panasonic Corporation 01 ASCTB58E 010-T
6 5 7 6 5 1 NC Relay Sockets and DIN terminal sockets Vertical (Slim) type wrapping socket NC-WS 9.9 1.177 1.6.96 1.5 1.0.803.95.87 3.9.15 1.0 7.9 1.098 0.3.1.16 6.8.69 7 3 11 1 13 1 15..600 Terminal cross section 0.6±0.05.0±.00 1.0±0.1 ±.00 Chassis cutout 1.0 0.6.0 8. 1.118 6.8.69 11.5.53 Vertical (Slim) type wrapping socket NC-WS 1.6.96 1.5 1.0.803.9.87 3.9 1.0.15 6.8.69 Chassis cutout.0 1.73.1.16.0 0.3 1.65 38 1 8 3 9 10 15 16 15. 35.56.600 1.00 5.0.5 1.673 11.5.53 6.8.69 0.6.0 1.0 NOTES 1. Soldering should be done quickly to avoid damaging the thermoplastic body.. For solder terminal types, connect terminals as shown in the diagram at right to maintain insulation distance. Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ Panasonic Corporation 01 ASCTB58E 010-T