General Description Features est Series is a series of 3 to 340 seconds single chip high quality voice synthesizer IC which contains one 4-bit Input port (provided for est005 and above); three 4-bit I/O ports; and a tiny controller. est Series provides strong features and uses improved algorithm to achieve pure speech. By programming through the tiny controller, user s applications, such as section combination, trigger mode, control outputs, keyboard matrix and other logic functions, can be easily implemented. Product est003 est004 est005 est010 est015 est020 est030 est040 Duration (@ 6K 3 sec 5 sec 10 sec 15 sec 21 sec 31 sec 42 sec sample rate) ROM (bits) 10Kx10 16Kx10 32Kx10 48Kx10 64Kx10 96Kx10 128Kx10 PROG. ROM (bits) 8Kx10 32Kx10 RAM (bits) 32x4 64x4 128x4 I/O Ports 2 I/O 8 I/O 4 Inputs + 8 I/O D/A Traditon DAC Direct Drive Direct Drive / Traditional DAC Ring Type Ring or Resonator type (optional) RESET Pin No Yes Product est060 est061 est081 est120 est121 est171 est251 est341 Duration (@ 6K 63 sec 85 sec 127 sec 170 sec 255 sec 340 sec sample rate) ROM (bits) 192Kx10 256Kx10 384Kx10 512Kx10 768Kx10 10248Kx10 PROG. ROM (bits) RAM (bits) I/O Ports D/A RESET Pin 4 Inputs + 8 I/O 4 Inputs + 12 I/O 4 Inputs + 8 I/O 32Kx10 128x4 Direct Drive / Traditional DAC Ring or Resonator type (optional) Yes 4 Inputs + 12 I/O Single power supply Crystal/Ring oscillator option Three 340 seconds voice capacity Power down mode for power saving Reset pin available Single ROM for voice program. 32K maximum program address size Readable ROM data This specification is subject to change without further notice. (12.30.2003 V1.0) Page 1 of 7
One 6 bit timer overflow control is provided Two stacks for subroutine call 5 bits ASPCM+ synthesis 38KHz modulation for IR transmission 15 steps volume control Direct Drive/traditional DAC 8 bits resolution D/A GREEN Voice Pin Descriptions Symbol I/O Function I Bit 0 of Port 1 (not applicable for est003 & est004) I Bit 1 of Port 1 (not applicable for est003 & est004) I Bit 2 of Port 1 (not applicable for est003 & est004) I Bit 3 of Port 1 (not applicable for est003 & est004) I/O Bit 0 of Port 2 I/O Bit 1 of Port 2 I/O Bit 2 of Port 2 (not applicable for est003) I/O Bit 3 of Port 2 (not applicable of est003) I/O Bit 0 of Port 3 (not applicable of est003) I/O Bit 1 of Port 3 (not applicable of est003) I/O Bit 2 of Port 3 (the pin can generate 38KHz square wave) I/O Bit 3 of Port 3 (pin can be treated as LED output) P4.0 I/O Bit 0 of Port 4 (not applicable for est003 ~ est040, est060, & est120) P4.1 I/O Bit 1 of Port 4 (not applicable for est003 ~ est040, est060, & est120) P4.2 I/O Bit 2 of Port 4 (not applicable for est003 ~ est040, est060, & est120) P4.3 I/O Bit 3 of Port 4 (not applicable for Est003 ~ est040, est060, & est120) I Positive digital power supply. I I Ring oscillator input pin. RESET I Reset Pin (not applicable for est003, est004, & est005) O I Crystal Output Pin (not applicable for est003, est004, & est005) I Use for testing only (not applicable for est003 & est004) I Negative digital power supply. I Positive analog power supply (not applicable for est003) VSSC I Negative analog power supply (not applicable for est003) VO O Constant Current Output / Push-Pull Voice Output O Push-Pull Voice Output (not applicable for est003) This specification is subject to change without further notice. (12.30.2003 V1.0) Page 2 of 7
Absolute Maximum Ratings Items Symbol Min Max Unit Supply Voltage V DD-V SS 0.3 +6.0 V Input Voltage V IN V SS 0.3 V DD+0.3 V Operating Temperature T OP 20.0 +70.0 Storage Temperature T STG 55.0 +125.0 0 C 0 C Electrical Characteristics (25 C, Vdd=3.0 Volts unless otherwise specified) Items Sym Min. Typ. Max. Unit Condition Operating Voltage V DD 2.2 3.0 5.5 V - Standby Current I DDS - - 2.0 ua V DD=3V Operating Current I DDO - P2, P3, P4 Drive Current P2 Sink Current (before KEY B) P2 Sink Current (after KEY B) 250 350 ua 2 4 ma V DD=3V, no load, Constant current D/A stopped V DD=3V, no load, Push-pull current D/A running I OD 2.0 3.0 - ma V DD=3V, V O=2.4V I OS - 3.0 10.0 ua V DD=3V V O=3V I OS 2.3 3.5 - ma V DD=3V V O=0.4V P2, P4 Sink Current I OS 2.3 3.5 - ma V DD=3V, V O=0.4V P1 Input Current I IH - 3.0 10.0 ua V DD=3V VO Output Current I VO 4.0 VO, Output Current Oscillation Resistor R - 5.2 6.4 ma V DD=3V, Vo=0.7V 5.3 6.7 ma V DD=4.5V, Vo=0.7V I VO 150 180 - ma V DD=3V, Vo=0.7V 470 - KΩ 100 - KΩ V DD=3V (for est003 ~ est005 only) V DD=3V (for est010 ~ est341 only) Oscillation Freq. F 1.08 1.2 1.32 MHz V DD=2.2 ~ 5.5V This specification is subject to change without further notice. (12.30.2003 V1.0) Page 3 of 7
Application Circuit Important notes for the following application circuits: 1. For noisy power supply application, suppress noise by adding ceramic capacitor between and ground near the IC s pad. The recommend capacitor value is 0.1µF. 2. For heavy loading application, it is recommended that an electrolytic capacitor is added between and ground. The recommended capacitor value for button cell applications is 10µF. 3. The recommended value for button cell internal impedance is 750Ω or less. 4. The use of spring direct trigger is not recommended. If you must use such trigger, you need to add a ceramic capacitor between trigger pin and ground to debounce the spring noise. The recommend capacitor value is 0.001 ~ 0.01 µf. est003 Application Circuit for 6-Key 104 VSSC P21 P20 P33 P32 This specification is subject to change without further notice. (12.30.2003 V1.0) Page 4 of 7
est004 Application Circuit for 20-Key est004 VSSC 3 7 0 4 8 1 5 9 2 6 0 est005 ~ est341 Application Circuit for 20-Key I O VSSC VO est004 3 7 0 4 8 1 5 9 2 6 0 This specification is subject to change without further notice. (12.30.2003 V1.0) Page 5 of 7
est005 ~ est341 Application Circuit for 32-Key O VSS 10K 10K 10K 3 7 1 5 9 0 4 8 2 6 0 1 5 9 3 7 1 2 6 0 4 8 2 est005 ~ est341 Application Circuit for 64-Key O VSSC D2 D3 7 5 3 1 9 7 0 8 6 4 2 0 8 1 9 7 5 3 1 9 2 0 8 6 4 2 0 3 1 9 7 5 3 1 4 2 0 8 6 4 2 5 3 1 9 7 5 3 6 4 2 0 8 6 4 This specification is subject to change without further notice. (12.30.2003 V1.0) Page 6 of 7
est005 ~ est341 Application Circuit for 128-Key O VSSC D2 D3 7 5 3 1 9 7 0 8 6 4 2 0 8 1 9 7 5 3 1 9 2 0 8 6 4 2 0 3 1 9 7 5 3 1 4 2 0 8 6 4 2 5 3 1 9 7 5 3 6 4 2 0 8 6 4 L9 L12 L14 L16 L10 L11 L13 L15 L9 L10 L11 L12 L13 L14 L15 L16 5 3 1 9 7 05 13 21 6 4 2 0 8 06 14 22 7 5 3 1 9 07 15 23 8 6 4 2 00 08 16 24 9 7 5 3 01 09 17 25 0 8 6 4 02 10 18 26 1 9 7 5 03 11 19 27 2 0 8 6 04 12 20 28 This specification is subject to change without further notice. (12.30.2003 V1.0) Page 7 of 7