Item Qty Price (ea.) Total Brewhouse: 10 BBL / 1200 L 2 Vessel Micro-Brewhouse - Direct Fire 1 $84,950.00 $84,950.00 Mash / lauter tun vessel 1 Brew kettle / whirlpool vessel 1 Riello power burner 1 Stainless brewhouse work platform & stairs 1 Brewhouse tank lights 2 Milled lauter tun floor Complete hard piped SS brewhouse manifold 1 Enclosed wort sight glass/manometer set up for wort run off 1 Digital SS flow meter for mash in/sparge water 1 Cold water blend valve with analog thermometer 1 Sanitary centrifugal wort pump - with 2 HP/1.5 KW SS motor 1 Sanitary centrifugal grant pump - with 2 HP/1.5 KW SS motor 1 Thermaline SS plate heat exchanger - T8-49 - water/wort 1 SS brewhouse control panel with digital temperature controllers 1 Variable frequency drive for BH pumps 2 Wort aeration & sight glass assembly 1 Mash hydrator with 4" valve 1 Mash tun grain out chute 1 Sparge sprayer assembly 1 Mash tun CIP assembly 1 Adjustable tank leveling pads 8 Optional Item External Open Wort Grant - 20 Gal / 80 L 0 $650.00 Optional Item 85 L Enclosed Hop Back 0 $3,000.00 Optional Item Water / Glycol Pre-chiller 0 $1,650.00 Adds separate water/glycol brazed copper heat exchanger prior to SS process heat exchanger. Includes control valves. Optional Item Mash Rakes & Grain Out 1 $10,500.00 $10,500.00 2 HP/1.5 KW gear drive 1 Variable frequency drive 1 Adjustable grain out plow 1 Optional Item Mash / Kettle Mixer Upgrade 0 $10,500.00 Adds mixer and controls to brew kettle to convert to multi-use vessel. Mash tun/brew kettle/whirlpool. Includes mash pump and piping to perform step mashing and transfer mash to lauter tun.
Optional Item Separate Whirlpool Vessel 0 $13,950.00 Separate whirlpool with BH platform and piping modifications 20 BBL / 2400 L Hot Liquor Tank - 316 SS Interior 1 $15,500.00 $15,500.00 9 KW immersion heater 1 1.5 HP / 1.1 KW SS pump with SS pump stand & TC tee 1 VFD controller for HLT pump 1 Tank fill level controls with Warrick conductivity sensor 1 RTD assembly 1 1" Water solenoid valves - 24V (tank fill and recirculate) 2 1" x TC adapters 3 1.5" butterfly valves 4 Clamps and gaskets Optional Item 30 BBL / 3500 L Hot Liquor Tank - 316 SS Interior 0 $17,250.00 Optional Item 20 BBL / 2400 L Cold Liquor Tank 1 $13,950.00 $13,950.00 Glycol cooling jackets 3/4" glycol solenoid valve - Zero differential 1 1.5 HP / 1.1 KW SS pump with SS pump stand & TC tee 1 CLT pump controls 1 Tank fill level controls with Warrick conductivity sensor 1 RTD assembly 1 1" Water solenoid valves - 24V (tank fill and recirculate) 2 1" x TC adapters 3 1.5" butterfly valves 3 Clamps and gaskets Optional Item 30 BBL / 3500 L Cold Liquor Tank 0 $14,950.00
Cellar Package 1 $2,950.00 $2,950.00 Goodyear brewers hose - 1.5" x 5 ft (1.5 m) length 1 Goodyear brewers hose - 1.5" x 10 ft (3 m) length 2 Goodyear brewers hose - 1.0" x 10 ft (3 m) length 2 Goodyear brewers hose - 1.0" x 15 ft (4.5 m) length 1 1.5" Tri-clamp butterfly valve 4 1.5" Tri-clamp 90 deg. elbows 4 1.5" Tri-clamp tee 2 1.5" Tri-clamp 45 deg. elbow 1 1.5" clamps and gaskets 30 1.5" Tri-clamp end caps 4 1.5" Tri-clamp x 3/4" NPT adapter 2 1.5" TC sight glass 1 Spare seal for brewhouse centrifugal pump 1 Spare seal for portable centrifugal pump 1 Spare seal for HLT/CLT pump 1 Spare door gaskets for BH manway doors SS grain out hoe 1 20 BBL / 2400 L Uni-Tank - (1.5 Bar) AS1210 4 $12,200.00 $48,800.00 1.5" butterfly valves 3 2" pressure vacuum relief valve 1 1.5" Perlick sample valve 1 Pressure gauge 1 1.5" end cap 1 2" end cap 1 Shadowless manway 1 CO2 blow off tube 1 Rotating racking assembly 1 60 degree cone 1 Multiple glycol zones Fully welded cladding Optional Item 10 BBL / 1200 L Uni-Tank - (1.5 Bar) AS1210 0 $9,175.00 20 BBL / 2400 L Jacketed Brite Tank - (1.5 Bar) AS1210 1 $11,400.00 $11,400.00 1.5" butterfly valves 2 2" pressure vacuum relief valve 1 1.5" Perlick sample valve 1 Pressure gauge 1 1.5" end cap 1 Sintered SS carb stone assembly 8" - Zahm Nagel 1 3/8" SS ball valve for CO2 inlet 1 Shadowless manway 1 Multiple glycol zones Fully welded cladding
Optional Item 10 BBL / 1200 L Jacketed Brite Tank - (1.5 Bar) AS1210 0 $8,375.00 Optional Item 10 BBL / 1200 L Brite Tank - Single Wall - (1.5 Bar) AS1210 0 $5,675.00 Optional Item 20 BBL / 2400 L Brite Tank - Single Wall - (1.5 Bar) AS1210 0 $7,375.00 Cellar Control Panel (up to 8 controllers) 1 $995.00 $995.00 Optional Item Cellar Control Panel (up to 16 controllers) 0 $1,495.00 Nema 4x enclosure prewired with all controls and relays 1 24 VAC glycol solenoid control transformer 1 Main power disconnect 1 Dual Display, Programmable Digital Temp Controller 5 $175.00 $875.00 Stainless RTD Assembly With Spring Loaded Probe 5 $135.00 $675.00 Glycol Solenoid Valve - 3/4" Zero Differential 5 $105.00 $525.00 Malt Mill: Two Roll Malt Mill, up to 3000 lb/hr (1300 kg/hr) 1 $4,950.00 $4,950.00 Adjustable grooved rolls 2 3 HP / 2.2 KW motor 1 Motor starter w/ thermal overload 1 Inlet grain bag hopper, 55 lb / 25 kg capacity 1 Optional Item Malt Mill Stand (required without grist case mounting) 0 $595.00 1.5" SS square tube design, adjustable feet, auger boot adapter SS Grist Case - 44 cu/ft - 1250 L Gross Capacity, Floor Unit 1 $3,995.00 $3,995.00 (1 L = approx. 1 lb/0.45 kg) Mill mounting adapter, adjustable feet, auger boot adapter Malt Auger - Chore Time M-75 1 $2,650.00 $2,650.00 3/4 HP direct drive motor 50 ft flex auger w/ PVC tube
Sanitary Portable Pump w/ SS Cart - 2 HP / 1.5 KW 1 $2,800.00 $2,800.00 Nema 4 VFD motor control 1 Stainless cart with handle 1 1.5" butterfly valve 1 1.5" elbow 1 1.5" clamps and gaskets 2 Optional Item 2-Station, Manual Keg Washer 0 $8,500.00 Optional Item 2-Station, Semi-Auto Keg Washer 1 $14,450.00 $14,450.00 Optional Item 3-Station, Semi-Auto Keg Washer 0 $17,000.00 Optional Item 3-Station, Semi-Auto Keg Washer w/ Acid Tank 0 $19,450.00 Pre-Install Drawings, Layout, Installation Assistance 1 $10,950.00 $10,950.00 & Initial Brew Supervision 1 man, 5-7 days total over 2 visits. Travel and lodging included. Additional days at $650 per day as required. PRICE DOES NOT INCLUDE SHIPPING CHARGES $6,000-$9,000 per 40-45 ft shipping container Required Brewery Utilities: Electrical Supply: 400-415 V, 3 phase, 100-150 amps Gas input: 300,000 btu/hr supply Water: 3/4" - 1" 10-20 gpm filtered water Air, Oxygen & CO2: as needed Terms: 25% deposit, 25% @ 8-10 weeks, 50% prior to shipment Ex Factory - Escondido, CA & Shanghai 15.05.2015 Price subject to change without notice Estimated manufacturing & shipping TBD at time of order Total System Price (USD) $230,915.00