OpenNet Controller UL Listed File #E Programming Software; WindLDR Programs all IDEC PLCs Windows-based (compatible with Windows,,, NT., ME, XP or Vista) Digital I/O -,, and point cards - inputs and outputs, with expansion power supply Analog I/O -up to analog inputs or analog outputs --V, -V, ±V, ±V, -ma Built-In Communications Ports - RS (programming port, ASCII, printer and modem ready) - RS (programming port and data link) Built-in High-Speed Counter - channel, khz, -bit resolution Memory -K words (K steps) user program capacity Realtime Calendar/Clock Password Protection PID Algorithm Programming Instructions Transmit/Receive Built-in X/Y Conversion Sub-Routine Call/Return for Modular Programming Square Root - and -bit Math, Add, Sub, Mult, Div Data Conversion to/from Dec, Hex, BCD, ASCII Block Move Summation Averaging Day of Week Program Scheduling Built-in Hayes AT command set for modem dialup/ pager application Spec Tech Industrial Vest Ave. Valley Park, MO Phone: SPECTECH Email: sales@spectechind.com www.spectechind.com
Programmable Logic Controllers Hardware Features PLCs Operator Interfaces CPUs Electrical FCA-CPK FCA-CPS Rated Voltage Maximum Input Current Reverse Polarity Protection Operating Temperature Storage Temperature Relative Humidity Vibration Resistance Shock Resistance Dielectric Strength Ground Mounting Style High-speed counter sink output High-speed counter source output V DC (-V DC, including ripple).a at V DC Prevents damage if incorrectly wired. to + C - to + C to % RH (non-condensing) to Hz, amplitude.mm to Hz. m/sec (G) sweep cycles/axis (IEC ) m/sec (G), ms shocks each in axes (IEC ) Between power terminal and FG: V AC, min Between I/O terminal and FG: V AC, min Grounding resistance Ω (maximum) mm DIN rail Automation Software The eighth slot must be an expansion power supply module. (Photo is only an example of the range of available modules.) Power Supplies Sensors Communication & Networking General ONC Available Instructions User Program Capacity Average Scan Time Input Total I/O Points Internal Relay Special Internal Relay Shift Register Timer Counter Data Register Link Register Remote I/O Real-Time Calendar/Clock Runtime Program Protection External Run/Stop Control Power Failure Protection Self-Diagnostics Auto Start Function Standard ONC CPU basic, advanced (PID, square root, subroutine calls, etc.) K words flash memory ms or greater points (I-I) points (Q-Q) Using expansion power supply: I/O points (M-M) (M-M) (R-R) (T-T; -sec, -msec, -msec, -msec) (C-C; adding, dual pulse reversible, up/down selection reversible) (D-D) master (L - L), slave (L - L, L - L,..., L - L) points Yes Yes (password protected) Yes Yes Yes Yes www.idec.com
Part Numbers Item Description Part Number CPU Modules Input Modules High-speed counter, sink output FCA-CPK High-speed counter, source output FCA-CPS points V DC input, sink/source compatible, terminal block FCA-NB DC Input points V DC input, sink/source compatible, nylon connector FCA-NB points V DC input, sink/source compatible, nylon connector FCA-NB points V DC input, sink/source compatible, FUJITSU connector FCA-NB AC Input points V AC input, terminal block FCA-NA Analog Input channels, -ma, selectable by DIP sw, terminal block FCA-AD Analog channels, -ma, selectable by DIP sw, terminal block FCA-DA Relay points relay output, terminal block FCA-R points relay output, nylon connector FCA-R Modules points transistor output sink, terminal block FCA-TK points transistor output sink, nylon connector FCA-TK Transistor points transistor output protect source, terminal block FCA-TP points transistor output sink, nylon connector FCA-TK points transistor output sink, FUJITSU connector FCA-TK Expansion Module Expansion power supply FCA-EA Network Interface Modules Accessories Software Remote I/O Master Module FCA-SXSM IDEC-Modbus Converter Package (see Communication & Networking section for details) IDEC-MBUS-CONVPCK Housing ( pcs/bag) for FCA-R VHR-N Housing ( pcs/bag) for FCA-TK, -NB VHR-N Housing ( pcs/bag) for FCA-TK, -NB H-SHF-AA Pins ( pcs/bag) for FCA-TK, -NB SHF-T-.BS Pins ( pcs/bag) for FCA-R/TK, -NB SVH-T-P. Cable with Fujitsu connector (for FCA-TK/NB) FCA-KUSA Breakout Module (for FCA-TK, -NB) BXD-TA or BXD-SA Windows-based programming software for IDEC PLCs - WindLDR FCY-LPCDW* Software application to link OPC/DDE compliant windows applications to IDEC PLCs (for more information see Communication Section ) WINDSRV Programming Cable Cable to connect ONC to PC FCA-KCC Manuals ONC User Manual EM-. *For more information on WindLDR see page and the Automation Software section.. For more information on WindSRV see the Automation Software section. USA: --IDEC Canada: --IDEC
POWER RUN ERROR HSC Programmable Logic Controllers OpenNet Controller, Networking & Applications PLCs PC Communication The ONC is programmed by our intuitive WindLDR software -use RS or RS ports -upload, download and monitor programs Computer Link Cable C FCA-KCC m (. ft.) long D-sub -pin Female Connector RSC Port or Port Master Station Slave Station Slave Station Slave Station Operator Interfaces Data Link - Superiority in Networking Connect up to ONC PLCs or the HG Series operator interface on a data link network. Communication Selector DIP Switch HG Series Operator Interface Automation Software RSC/RS Converter FCA-MD st Unit D-sub -pin Female Connector RSC Cable HDZ-C.m (. ft.) long nd Unit Power Supplies Computer Link - Power & Versatility Connect ONCs on a :N computer link system. Upload, download, monitor, and update data. Twist-pair Shielded Cable nd Unit RS Communication & Networking Sensors Communication Flexibility Easy connections to any RC equipment through the user defi ned RSC port or. Built-in Hayes AT command set for direct modem dialup and pager applications. COM A B Z HSC RS OUT A B G +V V O N DIP Switch Modem Printer Barcode Reader www.idec.com
Analog Input and Modules One card handles different signal types, [±V, ±V, -V, -V, or -ma], switch selectable Input module has inputs per card, cards per CPU, analog input points maximum module has outputs per card, cards per CPU, analog output points maximum -bit resolution, - counts, count range divides evenly Fast input scan, ms + scan time I/O error ±.% full scale @ C Convenient input termination Type of Protection Analog Input Module Voltage Input Current Input COM Ω +V -V + Analog Module FCA-DA Analog Input Points Per Card Part NumberFCA-ADFCA-DA Connector Removable screw terminal blocks Removable screw terminal blocks Input Signal -V DC, ±V DC, -V DC, ±V DC, -ma -V DC, ±V DC, -V DC, ±V DC, -ma Resolution bits bits Range - counts - counts Input Error ±.% of full scale @ C NA Error NA ±.% of full scale @ C Conversion Time ms per point NA Settling Time NA ms Input Impedance Voltage: MΩ minimum Current: Ω Load Impedance NA Voltage= kω minimum (Current=Ω, Ω max.) Internal Current Draw ma@v DC ma@v DC Differential Amplifier Analog Module +V V NA Voltage Current COM USA: --IDEC Canada: --IDEC
Programmable Logic Controllers -Point DC Input Modules Power Supplies PLCs DC Input Module FCA-NB Operator Interfaces Automation Software DC Input Module FCA-NB One card handles sink (NPN) or source (PNP) input signals points per card, cards local, cards expansion, cards max. per CPU -V DC input voltage range Software selectable input fi ltering, - msec High-speed catch inputs, fi rst points user defi nable, pulse detection within -μsec range Termination connector -FCA-NB - removable screw terminal blocks -FCA-NB - removable nylon pin connector Input DC Sink/Source Part Number FCA-NB FCA-NB Connector Screw terminal blocks Nylon pins Input Voltage Range -V DC -V DC Input Voltage V DC V DC Current Per Point ma ma Internal Current - all inputs ON ma ma Input Impedance.kΩ.kΩ On/Off Voltage /V DC /V DC On/Off Time /μs /μs -Point DC Input Modules DC Input Module FCA-NB Sensors DC Input Module FCA-NB Communication & Networking One card handles sink (NPN) or source (PNP) input signals points per card, cards local, cards expansion, cards max. per CPU -V DC input voltage range Software selectable input fi ltering, - msec High-speed catch inputs, fi rst points user defi nable, pulse detection within -μsec range Termination connector -FCA-NB - removable nylon pin connector -FCA-NB - Fujitsu connector Input DC Sink/Source Part Number FCA-NB FCA-NB Connector Nylon Fujitsu Input Voltage Range -V DC -V DC Input Voltage V DC V DC Current Per Point ma ma Internal Current - all inputs ON ma ma Input Impedance.kΩ.kΩ On/Off Voltage /V DC /V DC On/Off Time /μs /μs www.idec.com
-Point AC Input Module points per card, cards local, cards expansion, cards max. per CPU -V AC rated input voltage -V AC input voltage range On/off detection set at ms Convenient termination connector, removable screw terminal blocks Input Operating Range Input Voltage (V AC)... Input Current (ma) ON Area Transition Area OFF Area AC Input Module FCA-NA Input AC Part Number FCA-NA Connector Removable screw terminal blocks Input Voltage Range -V AC Input Voltage -V AC Current Per Point ma Internal Current - all inputs ON ma Input Impedance kω (Hz) On/Off Voltage /V AC On/Off Time ms Input Internal Circuit COM Input Internal Circuit USA: --IDEC Canada: --IDEC
Programmable Logic Controllers -Point Relay Modules Operator Interfaces Automation Software Power Supplies PLCs Relay Module FCA-R Relay Module FCA-R points per card, points per common, cards max. per CPU s rated V AC/A or V DC/A Turn On/Off delay -ms,, operations per relay minimum Termination connector -FCA-R - removable removable screw terminal blocks -FCA-R - removable nylon pin connectors Relay Part Number FCA-R FCA-R Connector Removable screw terminal blocks Nylon pin Voltage V AC/V DC V AC/V DC Current Per Point A A Internal Current - all inputs ON ma ma On/Off Time /ms /ms -Point DC Sink Modules DC Sink Module FCA-TK Sensors DC Sink Module FCA-TK Communication & Networking transistor sink outputs per card, cards max. per CPU s rated -V DC/.A Turn On/Off delay μsec max. Opto-isolated outputs Termination connector -FCA-R - removable removable screw terminal blocks -FCA-R - removable nylon pin connectors DC Sink Part Number FCA-TK FCA-TK Connector Removable screw terminal blocks Nylon pin Voltage -V DC -V DC Current Per Point ma@ V DC ma@ V DC Internal Current - all ma ma inputs ON On/Off Time /μs /μs www.idec.com
-Point DC Protect Source Module transistor protect source outputs per card, cards max. per CPU s rated -V DC/.A Turn On/Off delay μsec max. Opto-isolated outputs Termination connector, removable screw terminal blocks DC Sink Module FCA-TK transistor sink outputs per card, cards max. per CPU s rated.-.v DC/.A Turn On/Off delay μsec max. Opto-isolated outputs Termination connector -FCA-TK - removable nylon pin connector -FCA-TK - removable Fujitsu connector Protect Source Module FCA-TP -Point DC Input Modules DC Source Part Number FCA-TP Connector Removable screw terminal blocks Voltage -V DC Current Per Point ma @ V DC Internal Current - all inputs ON ma On/Off Time μs/μs DC Sink Module FCA-TK DC Sink Part Number FCA-TK FCA-TK Connector Nylon pin Fujitsu Voltage.-.V DC.-.V DC Current Per Point ma@v DC ma@v DC Internal Current - all ma ma inputs ON On/Off Time /μs /μs USA: --IDEC Canada: --IDEC
Programmable Logic Controllers Expansion Power Supply Module PLCs Expansion Power Supply Module FCA-EA Operator Interfaces Automation Software Expands the ONC from up to I/O points Increases I/O and functional modules by Comes with a cable connector and contacts Simple, easy and convenient mounting Install in the th slot only Part Number FCA-EA Connector Nylon - pin Input Voltage Range - V DC (including ripple) Input Voltage V DC Internal Current ma Momentary Power Interruption msec (V DC), Level PS- (EN) Power Supply Wiring Connector Power Supplies Power Voltage: V DC Inrush Current: A (same power source for CPU) + Fuse : NC : NC : V DC (red) : V (blue) : FG (green) Ground Sensors FCA-EA Expansion Power Supply Module Mounting Position Mount the expansion power supply module in the eighth slot Communication & Networking CPU Module modules (I/O and functional) modules (I/O and functional) Expansion Power Supply Module A maximum of functional modules can be mounted in any of slots Mount the expansion power supply module only in the eighth slot, otherwise correct allocation of I/O and link register numbers may not occur. www.idec.com
Dimensions CPU Module... Digital I/O, Analog I/O, Expansion Power Supply.... Example: the following figure illustrates a system setup consisting of a remote I/O master module, a CPU module, and three I/O modules. V. Interface REMOTE OUT idec USA: --IDEC Canada: --IDEC