Professional Network Surveillance System, delivering Superior Image and Total System Quality Panasonic, renowned in the surveillance industry for its high quality surveillance cameras, first introduced the Network Surveillance System in 2005. During this time, network surveillance cameras have become increasingly popular thanks to their ability to enable remote surveillance while lowering total cost of ownership (TCO). Encompassing a wide choice of cameras, encoders, recorders and management software, has been a success in the market offering significant technological innovations. Lower TCO, however, is not the only benefit from Panasonic Network Surveillance System. also offers professional surveillance solutions with Superior Image and Total System Quality, the hallmarks of the range. In the spring of 2008, is evolving to provide an even better and more complete solution with the introduction of the new megapixel line-up. Including two megapixel cameras, a high performance network recorder and a multi channel high definition video decoder. now more than ever is synonymous with Superior Image and Total System Quality. Providing high quality across the complete system, enhancing efficiency and reliability For accurate identification and effective surveillance 2 is a fusion of IP Network, Intelligence, and Professional, the perfect name for a Panasonic IP Surveillance System. The above photographs were taken for the purpose of this explanation; actual performance and images may vary depending on environmental or other conditions. 3
Lowering TCO Network surveillance systems offer a remarkable advantage compared with conventional analog systems, lowering TCO. Installation Both cabling and labor costs are lower than the analog system. Existing networks can also be used, which lowers the initial cost even more effectively. Installation flexibility allows users to design a system with optimum camera position, increasing surveillance effectiveness. Operation Multiple remote locations can be monitored and managed via IP networks. The Management Software GUI (Graphic User Interface) makes operation, administration and management easy and comfortable. Analog Surveillance System Analog Cameras Matrix Switcher Coaxial Cable Monitors Management Software Controller IP Surveillance System Network Cameras Adding Ethernet Cable Ethernet Switch Digital Disk Recorder Network Disk Recorder Remote PC Maintenance Remote status monitoring and remote software upgrades. Easy system expansion. System down time, repair costs and risk-related costs are lower. PC Version 2 Version 1 Network Camera Adding Remote Version 3 A lower TCO, however, is not the only benefit from the range. offers professional surveillance with Superior Image and Total System Quality. 5
Total System Quality High quality cameras bring significant advantages to users, and when integrated into an Network Surveillance System, can rise to the challenge of a demanding surveillance application. The Network Surveillance System offers a number of system-enhancing features to further enhance efficiency and reliability. High image quality is vital for effective surveillance. With a number of innovative features made possible by Panasonic s advanced technology, engineering and manufacturing expertise, offers Superior Image for accurate identification. Megapixel High Image quality is vital to all surveillance cameras. The megapixel network cameras are equipped with a progressive scan 1.3 million pixels CCD and proprietary DSP that delivers outstanding image quality. The image is so detailed that it allows operators to identify subjects on a whole new level when compared to existing analog TV standard systems. Alternatively it can capture an area four times larger while maintaining the same image quality of conventional cameras. Applicable models: WV-NF302, WV-NP304, WV-NP1000 Series The person can be identified. Total System Quality Superior Image Superior Image ABF (Auto Back Focus), Focus Assist When there is a high contrast between dark and bright areas, it is difficult to reproduce an image satisfying both dark and bright areas. Dark areas disappear if the camera sets its iris to capture the bright areas. Conversely, if the iris is adjusted to the dark areas, bright areas will be washed out. This has been a particular problem with conventional surveillance cameras. uses a double speed CCD and a proprietary DSP including Area Free (PixelBased) Natural Contrast Image Correction to optimize contrast and faithfully reproduce objects in every area and every level of brightness. Pixel-Based delivers smoother natural reproduction regardless of position, size, shape or number of bright/dark areas. Applicable models:, WV-NS950 Series, WV-NW960 Series, WV-NW484S Dark and difficult to see indoors. Focus Assist Outdoor: washed out Superior color reproduction. The WV-NP1000 Series and the WV-NW484S are equipped with ABF (Auto Back Focus), which automatically adjusts back focus by adjusting the CCD position. ABF can eliminate the time required to manually adjust focus when installing cameras or changing location, lowering installation and maintenance costs. It can also be automatically ABF Camera Head activated when switching from color to B/W mode Lens or vice versa providing the best focus in each mode. This results in a precise focus 24 hours a day, both during the day and at night. The WVNF302 and WV-NP304 are equipped with a Focus Assist function, which indicates the best Day/Night Mechanism focus position by on-screen display so that Whole CCD Printed Circuit accurate focus adjustment can easily be made. Board moves to focus point Can be seen both indoors and outdoors. Adjusting the focus Best focus position is found. MPEG-4 Flexible Alarm Handling With smaller data volume, MPEG-4 allows the use of more cameras than JPEG within limited network capacity, making network operation more efficient and reducing the need for additional network equipment. Various alarm sources including Terminal input, VMD and Panasonic alarm command can trigger actions including SD memory recording, FTP image transfer, E-mail notification, Indication VMD on browser, Alarm terminal output and Panasonic protocol output. Command Alarm alarm The image compression ratio can Terminal also be changed in response to an input alarm, so that higher quality image can be provided as necessary*.with these features, flexible alarm handling can be designed according to the application requirement. * WV-NF302, WV-NP304 JPEG MPEG-4 Smaller data size Scene Change Detection SD memory recording E-mail notification AUX output Indication on browser Megapixel Progressive Video Output Interlaced video produced by an interline transfer CCD has motion blur and tearing problems. This is caused by the timing difference between odd fields and even fields, which gives the image a jagged appearance. This has been a particular problem with conventional surveillance cameras. The network cameras provide progressive video output by using a progressive scan CCD or Motion Adaptive Interlace-Progressive conversion,* ensuring clear images with less motion blur and no tearing even when the subject is moving. DNR (Digital Noise Reduction) All network cameras combine high sensitivity design and electronic sensitivity enhancement functions, enabling them to capture color images even when the lighting is dim. If the situation is too dark, the Day/Night Switching feature* automatically switches the camera from color to B/W, perfect for 24-hour surveillance. * Except for WV-NP240 Series, WV-NF284 It is necessary to amplify the image signal when capturing images under low light conditions. This, however, causes an increase in noise as well. In the Series, 2D-DNR for motion area and 3D-DNR for static area are effectively combined, realizing a clear low noise image with less motion blur and resolution deterioration. Applicable models:, WV-NS950 Series, WV-NW960 Series, WV-NW484S Interlaced scan Progressive scan Face cannot be identified. Facial features and clothing are clearly visible. ABS (Adaptive Black Stretch) ABS (Adaptive Black Stretch) increases visibility of subjects in dark areas without degrading image quality in bright areas by analyzing the illumination map/signal level distribution and adjusting gamma correction for each area separately. Applicable models: WV-NF302, WV-NP304 Details are unclear. The entire screen is clear. Alarm terminal output Panasonic protocol output Image quality change Real Time Monitoring Multi Channel Decoding Bi-directional Audio The WJ-GXD400 Multi Channel High Definition Video Decoder can decode 1x XGA (1,280 x 960) image with 2x VGA images or 6x VGA images simultaneously so that it can take full advantage of a 1,920 x 1,080 high definition display depending on the requirements of the application. Full duplex bi-directional audio allows interactive communication between camera site and monitoring site. (Depending on the model) User Friendly GUI In contrast with PC-based networked recorders that use a conventional OS, Panasonic recorders use an Embedded OS that takes full advantage of Panasonic's many years of surveillance know-how, ensuring long-term 24/7 surveillance under even the harshest conditions. User friendly GUI allows instinctive operation, reducing the burden on operators. analog slip ring transmission requires a DA-AD conversion and YC mix/separation process that causes image quality deterioration. It was believed that slip ring throughput is not fast enough to send a digital video signal, which requires 250 Mbps at VGA resolution. Panasonic has solved this problem by using Low Voltage Differential Signaling (LVDS) technology allowing the slip ring to transmit a video signal of up to 500 Mbps. With this technology, Panasonic digital slip ring transmission can transmit a digital video signal without the DA-AD conversion and YC mix/separation. Throughout the process, the signal remains digital resulting in no loss of image quality. The WJ-GXD400 Multi Channel High Definition Video Decoder is equipped with a HDMI video interface and can provide 1x XGA (1,280 x 960) image with 2x VGA images in 3 split screen or 6x VGA images in 6 split screen allowing precise identification and multi-screen monitoring. Each VGA image can be displayed at 30 ips so that decisive moments can be monitored. Applicable models: WV-NS950 Series, WV-NW960 Series Digital A/D DSP Analog D/A Image sensor Y+C MIX Composite 4VGA + VGA x 2 VGA x 6 Digital A/D Encode Separation MPEG/JPEG Slip Ring Auto image stabilizer digitally cancels the vibration on image by the advanced digital signal processing, enabling a camera to be installed where vibration or wind is a concern. (Depending on the model) Digital Slip Ring Transmission Digital 4 Before correction After correction The woman is standing in the dark and difficult to see. She is clearly visible. Bright areas are no washed out and detail in dark areas can now be see clearly. A/D DSP Image sensor Para/Seri LVDS LVDS Slip Ring Seri/Para LVDS SD Memory Backup Main Screen Playback of WJ-ND300A Network trouble Encode MPEG/JPEG Main Screen of WV-NF302 The WJ-ND400 is equipped with 9 Serial ATA HDD slots and the WJ-ND200 is equipped with two Serial ATA HDD slots, so that a disk can be removed without stopping the recording. Download WJ-ND400 VMD can detect motion in specified area and trigger the s flexible alarm actions. With IEEE802.3af PoE (Power over Ethernet), both power and image data can be transmitted through a single Ethernet cable. By eliminating the need for power cables and supplies when installing cameras or changing layouts, installation and maintenance costs are reduced. Power Supply Total System Solution The Network Surveillance System provides you a high quality total system made possible by the integration of cameras, video encoders with video analytics, recorders, video decoders, monitoring software and management software increasing the installation, operation and maintenance efficiency. Applicable models: WV-NP240 Series,, WV-NF284, WV-NW484S, WV-NF302, WV-NP304 Normal wiring The WJ-ND400 is equipped with RAID5/6 capability. So even if one or two HDDs are damaged, recorded images can still be recovered. The WJ-ND300A can be given RAID5 capability by adding an optional RAID5 Board WJ-NDB301. The WJ-ND200 is equipped with RAID1 mirroring function. Restore Hot plug Support Store in SD Memory Card VMD (Video Motion Detection) PoE wiring Power Power Power Video Analytic WV-NP240 Series Ethernet Switch Auto Image Stabilizer Analog Slip Ring Transmission PoE (Power over Ethernet) HDMI Video Interface Embedded OS RAID Redundancy DSRT (Digital Slip Ring Transmission) Alarm The network cameras can transmit 30 images/second real time video at up to VGA (640 x 480) image size in both JPEG and MPEG-4 mode. They can also simultaneously transmit high frame rate MPEG-4 and high quality JPEG images, making real time monitoring possible while recording high-resolution images. Network problems can be an issue with all IP network systems. This is why the network cameras are equipped with an SD Memory Card slot, so that when the network experiences a problem, during the data transfer to a FTP server or an network recorder, images can automatically be backed up. This prevents image loss and makes it possible to playback and check images captured while the network is down. * Progressive scan CCD: WV-NF302, WV-NP304, WV-NP1000 Series, WV-NP240 Series, WV-NF284 Motion Adaptive Interlace-Progressive conversion: WV-NW484S,, WV-NS950 Series, WV-NW960 Series Alarm FTP image transfer High Sensitivity Scene change detection can detect interference and sends an alarm signal when the camera s operation has been hampered with, such as a manual change in the camera s angle, removal of the camera lens, defocus, blockage of the camera lens with cloth or paint. (Depending on the model) Smart intelligence is also a key for the Network Surveillance System. The WJ-NT314 is equipped with a real time Video Analytic feature including 8 detection programs, each with three intruder detection areas and one object abandonment/removal detection area. Up to 8 detected objects can be traced in the intruder detection mode. Depth correction allows more accurate detection when the scene includes deeper depth. Power over Ethernet Switch Easy IP Set-up When the network cameras are connected to the Network Disk Recorders, their IP addresses can easily be obtained through the Easy IP Set-up features. By reducing the time and labor required for network set-up, Easy IP Set-up lowers installation and maintenance costs. Step2 Ethernet Switch Step1 Step3 Image Capture PC Intruders are traced with red frame. 6 Network Cameras Network Video Encoders System Integration Monitoring Recording Network Disk Recorders Iris Recognition System Monitoring Software Network Video Decoder Operation Management Management Software Network Surveillance System The above photographs were taken for the purpose of this explanation; actual performance and images may vary depending on environmental or other conditions. 7
Series Line-up The Series is designed to deliver the highest quality in every component, within the entire system. Megapixel Day/Night Fixed Dome Network Camera WV-NF302 WV-NF302 (12 V DC or PoE) WV-NF302 (12 V DC or PoE) Megapixel Day/Night Network Camera WV-NP304 WV-NP304 (24 V AC, 12 V DC or PoE) WV-NP304 (24 V AC, 12 V DC or PoE) WJ-ND400 WJ-ND400 (120 V AC) WJ-ND400 (220 ~ 240 V AC) Multi Channel High Definition Video Decoder WJ-GXD400 WJ-GXD400 (12 V DC, 100 ~ 240 V AC adapter attached) WJ-GXD400 (12 V DC, 100 ~ 240 V AC adapter attached) Lens: optional High performance for Megapixel Network Cameras with 9 Serial ATA HDD slots MPEG-4/JPEG Multi Channel High Definition Video Decoder for Megapixel Network Surveillance System Metal Body Day/Night Fixed Dome Network Camera featuring Megapixel image quality for superior identification Day/Night Network Camera featuring Megapixel image quality for superior identification WJ-ND300A WJ-ND300A (120 V AC) WJ-ND300A (220 ~ 240 V AC) WJ-ND200 WJ-ND200 (120 V AC) WJ-ND200 (220 ~ 240 V AC) Day/Night Dome Network Camera WV-NS950 Series WV-NS954 (24 V AC) WV-NS950 (220 ~ 240 V AC) WV-NS954 (24 V AC) Weather Resistant Dome Network Camera WV-NW960 Series WV-NW964 (24 V AC) WV-NW960 (220 ~ 240 V AC) WV-NW964 (24 V AC) with expandable capacity for digital image data from up to 32 Network Cameras Management Software WV-ASM100 WV-ASM100L (Light version) with removable HDD for digital image data from up to 16 Network Cameras WV-ASM100 Monitoring Software WV-ASM10 WV-ASM10 Dome Network Camera featuring 30x zoom and Weather Resistant Dome Network Camera featuring 30x zoom and management and monitoring software for multi-recorder multi-site system (System Controller WV-CU950 and monitor displays are optional.) Megapixel Day/Night Network Camera WV-NP1000 Series WV-NP1004 (24 V AC) WV-NP1000 (220 ~ 240 V AC) WV-NP1004 (24 V AC) Vandal Resistant Fixed Dome Network Camera WV-NW484S <Smoke Dome Type> WV-NW484S (24 V AC, 12 V DC or PoE) <Clear Dome Type> WV-NW484S (24 V AC, 12 V DC or PoE) 4CH MPEG-4/JPEG Video Encoder with Video Analytic WJ-NT314 WJ-NT314 (12 V DC, 120 V AC adapter attached) WJ-NT314 (12 V DC, 220 ~ 240 V AC adapter attached) 4CH MPEG-4/JPEG dual streaming Video Encoder featuring 2CH Video Analytic 4CH MPEG-4/JPEG Video Encoder WJ-NT304 WJ-NT304 (12 V DC, 120 V AC adapter attached) WJ-NT304 (12 V DC, 220 ~ 240 V AC adapter attached) 4CH MPEG-4/JPEG dual streaming Video Encoder Lens: optional Megapixel MPEG-4/JPEG dual streaming network camera Network camera designed for heavy duty use featuring Day/Night Dome Network Camera (12 V DC or PoE) (12 V DC or PoE) Color Fixed Dome Network Camera WV-NF284 WV-NF284 (24 V AC, 12 V DC or PoE) WV-NF284 (24 V AC, 12 V DC or PoE) Color Network Camera WV-NP240 Series WV-NP244 (24 V AC, 12 V DC or PoE) WV-NP240 (220 ~ 240 V AC or PoE) WV-NP244 (24 V AC, 12 V DC or PoE) Lens: optional Dome Network Camera featuring 22x zoom and Color Fixed Dome Network Camera with MPEG-4 and JPEG dual streaming, PoE, and 3.6x Variable-Focal Lens High quality MPEG-4 and JPEG dual streaming network camera 8
Trademarks and registered trademarks "Super Dynamic", "SDII", "SDIII" and "" logos are trademarks or registered trademarks of Panasonic Corporation. Important Safety Precaution: carefully read the operating instructions and installation manual before using this product. Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network. All TV pictures are simulated. Weights and dimensions are approximate. Specifications are subject to change without notice. These products may be subject to export control regulations. All product pictures are NTSC models. DISTRIBUTED BY: http://panasonic.net/security/ Printed in Japan (2B-002DU)