Cisco ASR 00-X Router Specifications This appendix provides the Cisco ASR 00-X Router specifications. Cisco ASR 00 Router Specifications, page Cisco ASR 00 Router Specifications, page Cisco ASR 00 Router, Cisco ASR 00-F Router, and Cisco ASR 00-X Router Specifications, page 0 Cisco ASR 0 Router Specifications, page Cisco ASR 00-X Router Specifications, page 0 Cisco ASR 00 Router Specifications This section lists the specifications for the Cisco ASR 00 Router. The following table lists the Cisco ASR 00 Router physical specifications. Table : Cisco ASR 00 Router Specifications Specification Midplane Connects the Cisco ASR 000 Series RP, Cisco ASR 000 Series ESP, Cisco ASR 000 Series SPA Interface (SIP), SPAs, and power supplies together in the system Dimensions (H x W x D) Height = 0. in. (. cm) Width =. in.(. cm) Depth =.0 in. (. cm) Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00 Router Memory and Storage Options Cisco ASR 00-X Router Specifications Weight Nominal operating temperature Specification Note Fully loaded chassis: 09. pounds (9. kg) Only chassis: pounds (.kg) Using the Cisco ASR000-ESP00 instead of the Cisco ASR000-ESP0 adds. lbs to the total weight of the router. to 0 F to 0 C Nominal operating humidity Storage temperature 0% to % to 0 F 0 to 0 C Power consumption Maximum DC: 00W Maximum AC: 00W Maximum (Out): W Cisco ASR 00 Router Memory and Storage Options Table : Memory and Storage Options for Cisco ASR 00 Router Memory Type RP eusb Default GB DRAM GB (Partitioned: xmb for NVRAM and the remaining for mass storage Maximum System Support GBDRAM Hard disk drive 0 GB for code storage or solid-state drive GB support Cisco ASR 00 Router Ethernet RJ- Port outs The Cisco ASR 00 Router has an RJ- port for the 0/00/000 Ethernet connection. The RJ- port supports IEEE 0.ab (Gigabit Ethernet) and IEEE 0.u (Fast Ethernet) interfaces compliant with 0BASET, 00BASETX, and 000BASET specifications. The RJ- port supports standard straight-through and crossover Category UTP cables with RJ- connectors. Cisco does not supply Category UTP cables; these cables are available commercially. Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 00 Router MGMT Ethernet Port outs The following table shows an RJ- port and connector. RJ- connector Cisco ASR 00 Router MGMT Ethernet Port outs Table : RJ- Management Ethernet Port outs TX Data+ Out TX Data Out RX Data+ In, NC RX Data In, NC Cisco ASR 00 Router BITS Port s and outs Table : BITS RJ- Receptacle outs for Cisco ASR000-RP RX Ring Receive Ring RX Receive (T/E), TX Ring Unused TX Unused, Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00 Router Console Port s and outs Cisco ASR 00-X Router Specifications Table : BITS RJ- Receptacle outs for Cisco ASR000-RP RX Ring /Bi (DTI) Receive Ring/Bidirectional DTI RX TIP /Bi (DTI) Receive TIP (T/E) Bidirectional DTI, TX Ring Transmit Ring/Bidirectional DTI TX Transmit TIP (T/E) Bidirectional DTI, Cisco ASR 00 Router Console Port s and outs Table : Console Port outs for Cisco ASR 00 Router RTS Out Request to Send (tied to pin, CTS) DTR Out Data Terminal Ready (always On) TXD Out Ring Indicator RXD In DSR In Data Terminal Ready CTS In Clear to Send (tied to pin, RTS) Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 00 Router Auxiliary Port s and outs Cisco ASR 00 Router Auxiliary Port s and outs Table : Auxiliary Port outs for Cisco ASR 00 Router RTS Out Request to Send DTR Out Data Terminal Ready (always On) TXD Out RI Ring Indicator RXD In DSR/DCD In Data Set Ready/Data Carrier Detect CTS In Clear to Send Cisco ASR 00 Router DB- out Assignments for Relays The alarm ports for the Cisco ASR 00 Router (Cisco ASR 00 Router and Cisco ASR 0 Router) power supplies reside on the DB- connector on the face of the power supply. The alarm ports are relay contact closures that the IOS environmental software controls. The environmental monitoring functions of the system can include voltage and temperature monitoring for the router installed components and failure sensing for power supply fan tray. Any alarms that light the front panel LEDs on the Cisco ASR000-RP causes a contact closure between the corresponding pins within the DB- alarm port of both power supplies. In the DB- connector, each alarm consists of a three-pin set containing a common pin, a normally open pin, and a normally closed pin. The connections that describe alarm activity are off (Common is connected to normally closed and normally open is disconnected) and on (Common is connected to normally open and normally closed is disconnected). The following table lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB- connector. Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00 Router Specifications Cisco ASR 00-X Router Specifications Table : Cisco ASR 00 Router DB- Connector out Assignments Common (CM) Normally Open (NO) Normally Closed (NC) SPARE CRTAA Critical Audible MAJAA Major Audible MINAA Minor Audible CRTVA Critical Visual 9 MAJVA Major Visual 0 MINVA Minor Visual 9 SPARE SPAREunused pin reserved for future use 0,,,,,, Cisco ASR 00 Router Specifications This section lists the specifications for the Cisco ASR 00 Router. The following table lists the Cisco ASR 00 Router physical specifications. Table 9: Cisco ASR 00 Router Specifications Midplane Dimensions (H x W x D) Specification Connects the Cisco ASR 000 Series RP, ASR 000 Series ESP, Cisco ASR 000 Series SPA Interface (SIP), SPAs, and power supplies together in the system Height = in. (. cm) (RU rack-mount per EIA RS-0) Width =. in. (. cm) (9 inch rack-mount or optional Telco rack- mount) Depth =.0 in. (. cm) (including card handles, cable-management brackets and power supply handles) Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 00 Router Memory and Storage Options Weight Specification Fully loaded chassis: 0 pounds (.9 kg) Only chassis: pounds (. kg) Nominal operating temperature to 0 F to 0 C Nominal operating humidity Storage temperature 0% to % to 0 F 0 to 0 C Power consumption Maximum DC: 00W Maximum AC: 90W Maximum (Out): W Cisco ASR 00 Router Memory and Storage Options The following table lists the hardware memory and storage options supported on the Cisco ASR 00 Router. Table 0: Memory and Storage Options for Cisco ASR 00 Router Memory Type RP eusb Default GB DRAM GB (Partitioned: xmb for NVRAM and the remaining for mass storage Maximum System Support GBDRAM For mass storage: hard disk drive 0 GB or solid-state drive Gb support Cisco ASR 00 Router Ethernet RJ- Port outs The Cisco ASR 00 Router has RJ- port for the 0/00/000 Ethernet connection. The RJ- port supports IEEE 0.ab (Gigabit Ethernet) and IEEE 0.u (Fast Ethernet) interfaces compliant with 0BASET, 00BASETX, and 000BASET specifications. The RJ- port supports standard straight-through and crossover Category UTP cables with RJ- connectors. Cisco does not supply Category UTP cables; these cables are available commercially. Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00 Router MGMT Ethernet Port s and outs Cisco ASR 00-X Router Specifications Cisco ASR 00 Router MGMT Ethernet Port s and outs Table : RJ- Management Ethernet Port outs for the Cisco ASR 00 Router TX Data+ TX Data RX Data+, NC RX Data, NC Cisco ASR 00 Router Console Port s and outs Table : Console Port outs for Cisco ASR 00 Router RTS Request to Send (tied directly to CTS) DTR Data Terminal Ready (always On) TXD Ring Indicator RXD DSR Unused CTS Clear to Send (tied to RTS) Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 00 Router Auxiliary Port s and outs Cisco ASR 00 Router Auxiliary Port s and outs The following table lists the pinouts of the dual RJ- ports for the auxiliary port signals. Table : Auxiliary Port outs for Cisco ASR 00 Router RTS Request to Send DTR Data Terminal Ready (always On) TXD RI Ring Indicator RXD DSR/DCD Data Set Ready/Data Carrier Detect CTS Clear to Send Cisco ASR 00 Router BITS Port s and outs The following table lists the pinouts of the front panel Building Integrated Timing Supply (BITS) RJ port. Table : BITS RJ- Receptacle outs for Cisco ASR 00 Router RX Ring Receive Ring RX TIP Receive TIP (T/E), TX Ring Unused TX TIP Unused, Cisco ASR 00-X Router Hardware Installation Guide 9
Cisco ASR 00 Router DB- out Assignments for Relays Cisco ASR 00-X Router Specifications Cisco ASR 00 Router DB- out Assignments for Relays The following table lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB- connector. Table : Cisco ASR 00 Router DB- Connector out Assignments Common (CM) Normally Open (NO) Normally Closed (NC) SPARE CRTAA Critical Audible MAJAA Major Audible MINAA Minor Audible CRTVA Critical Visual 9 MAJVA Major Visual 0 MINVA Minor Visual 9 SPARE SPAREunused pin reserved for future use 0,,,,,, Cisco ASR 00 Router, Cisco ASR 00-F Router, and Cisco ASR 00-X Router Specifications This section lists the specifications for the Cisco ASR 00 Router, Cisco ASR 00-F Router, and Cisco ASR 00-X Router. Note Unless stated otherwise, the specifications for the Cisco ASR 00-F Router are the same as those for the Cisco ASR 00 Router except where limited by constrained throughput of.g on the Cisco ASR 00-F Router.Similarly, most of the specifications for the Cisco ASR 00-X Router are the same as the specifications for the Cisco ASR 00 Router. The differences in specifications have been called out at the relevant places in this section. Some of the Cisco ASR 00-X Router specifications that are covered in this section are for ports that are specific to that router. 0 Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 00 Router Mgmt Ethernet RJ- Port outs Table : Cisco ASR 00 Router Specifications The following table lists the Cisco ASR 00 Router physical specifications. Midplane Dimensions (H x W x D) Weight Specification Connects the Cisco integrated ASR000-RP, the ASR 000 ESP or ESP0, SPAs, and power supplies together in the system Height:. in. (.9 cm) Width:. in. (9-inch rack-mount or optional Telco adaptor brackets) Depth:.0 in. (including card handles, cable-management brackets, and power supply handles) for mounting in a 00mm-enclosed cabinet 0 lbs (. kg) for a fully loaded Cisco ASR 00 Router or Cisco ASR 00-F Router. lbs (9. kg) for a fully loaded Cisco ASR 00-X Router Nominal operating temperature to 0 F to 0 C Nominal operating humidity Storage temperature 0% to % to 0 F 0 to 0 C Power consumption Maximum DC: 90W Maximum AC: 0W Maximum (Out): 0W Cisco ASR 00 Router Mgmt Ethernet RJ- Port outs Note Unless stated otherwise, the specifications for the Cisco ASR 00-X Router are the same as the Cisco ASR 00 Router specifications listed in this section. Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00 Router Console Port s and outs Cisco ASR 00-X Router Specifications The Cisco ASR 00 Router has RJ- port for the 0/00/000 Ethernet connections. The RJ- port supports IEEE 0.ab (Gigabit Ethernet) and IEEE 0.u (Fast Ethernet) interfaces compliant with 0BASET, 00BASETX, and 000BASET specifications. The RJ- port supports standard straight-through and crossover Category UTP cables with RJ- connectors. Cisco does not supply Category UTP cables; these cables are available commercially. Table : Management Ethernet 0/00/000 RJ- Port outs for Cisco ASR 00 Router TX Data+ TX Data RX Data+, NC RX Data, NC Cisco ASR 00 Router Console Port s and outs Note Unless stated otherwise, the specifications for the Cisco ASR 00-X Router are the same as the Cisco ASR 00 Router specifications listed in this section. The following table lists the pinout of the dual RJ- ports for the front panel console and auxiliary ports. Table : Console Port outs for Cisco ASR 00 Router RTS Request to Send (tied to CTS) DTR Data Terminal Ready (always On) TXD Ring Indicator RXD Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 00 Router Auxiliary Port s and outs DSR unused CTS Clear to Send (tied to RTS) Cisco ASR 00 Router Auxiliary Port s and outs Note Unless stated otherwise, the specifications for the Cisco ASR 00-X Router are the same as the Cisco ASR 00 Router specifications listed in this section. The following table lists the pinout of the dual RJ- ports for the auxiliary port signals. Table 9: Auxiliary Port outs for Cisco ASR 00 Router RTS Request to Send DTR Data Terminal Ready (always On) TXD RI Ring Indicator RXD DSR/DCD Data Set Ready/Data Carrier Detect CTS Clear to Send Cisco ASR 00 Router BITS Port s and outs Table 0: BITS RJ- Interface outs for Cisco ASR 00 Router RX Ring Receive Ring Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router BITS Port s and outs Cisco ASR 00-X Router Specifications RX TIP Receive TIP (T/E), Not used TX Ring Not used TX TIP Not used, Cisco ASR 00-X Router BITS Port s and outs Table : BITS RJ- Interface outs for Cisco ASR 00-X Router RX Ring Receive Ring RX TIP Receive TIP (T/E), Not used TX Ring Transmit Ring TX TIP Transmit TIP (T/E), Cisco ASR 00-X Router BNC GPS Ports Table : GPS Port out Attribute Waveform Amplitude 0 Mhz (input and output) Sine wave Square wave >. volt p-p(+ to +0 dbm) >. volts TTL compatible PPS (input and output) Pulse shape Pulse shape >. volts TTL compatible >. volts TTL compatible Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 00-X Router Time of Day Port out Attribute Impedance Pulse Width Rise Time 0 Mhz (input and output) 0 ohms 0% duty cycle AC coupled nanoseconds PPS (input and output) 0 ohms microseconds 0 nanoseconds Cisco ASR 00-X Router Time of Day Port out Table : RJ PPS/ToD Port out Name PPS_P or PPS RS signal PPS_N or PPS RS signal RESERVED Do not use this pin. Time of Day character RESERVED Do not use this pin. TOD_P or Time of Day character TOD_N or Time of Day character Cisco ASR 0 Router Specifications Table : Cisco ASR 0 Router Specifications This section lists the specifications for the Cisco ASR 0 Router. The following table lists the Cisco ASR 0 Router physical specifications. Midplane Specification Connects Cisco ASR000-RP, Cisco ASR 000-ESP0 or Cisco ASR 000-ESP00, Cisco ASR000-SIP0 and Cisco ASR000-SIP0, and power supplies together in the system Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 0 Router Specifications Cisco ASR 00-X Router Specifications Dimensions (H x W x D) Specification Height:. in. (9. cm) Width:. in. (. cm) Depth: in (. cm) with cable-management bracket and power supply handles included Weight.0 lb (. kg) (with redundant AC power supply, SPA and route processor and SIP blank covers, two embedded services processors, two route processors, six SIPs, and no SPAs) 90.0 pounds (loaded with DC power supplies) (. kg) Total with estimated superslot weights with: AC power supplies0 pounds (9. kg) DC power supplies 0.0 (9. kg) Nominal operating temperature Nominal operating humidity Storage temperature Note Using the Cisco ASR000-ESP00 instead of the Cisco ASR000-ESP0 adds. lbs to the total weight of the router. to 0 C 0% to % to 0 F 0 to 0 C Power consumption (x Zones) Maximum input (DC):,00W Maximum input (AC High Line):,000 W Maximum output (DC and AC High Line):,90 W Per Power Supply Power Consumption Maximum input (DC): 00W Maximum input (AC High Line):,000WMaximum input (AC Low Line):,0W Maximum output (DC and AC High Line):,9W Maximum output (AC Low Line):,W Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 0 Router Memory and Storage Options Cisco ASR 0 Router Memory and Storage Options Table : Memory and Storage Options for Cisco ASR 0 Router Memory Type R DRAM FECP DRAM eusb Internal Flash + NVRAM Default GB GB for ASR000-ESP- GB for ASR000-ESP0 GB on the integrated RP on the Cisco ASR 00 Router (partitioned: GB for bootflash; GB for mass storage) Maximum System Support GB GB GB Not Field Upgradeable Cisco ASR 0 Router Ethernet RJ- Port outs The Cisco ASR 0 Router has RJ- port for the 0/00/000 Ethernet connections. The RJ- port supports IEEE 0.ab (Gigabit Ethernet) and IEEE 0.u (Fast Ethernet) interfaces compliant with 0BASET, 00BASETX, and 000BASET specifications. The RJ- port supports standard straight-through and crossover Category UTP cables with RJ- connectors. Cisco does not supply Category UTP cables; these cables are available commercially. Cisco ASR 0 Router MGMT Ethernet Port s and outs Table : Management Ethernet 0/00/000 RJ- Port outs for Cisco ASR 0 Router TX Data+ TX Data RX Data+, NC RX Data, NC Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 0 Router Console Port s and outs Cisco ASR 00-X Router Specifications Cisco ASR 0 Router Console Port s and outs Table : Console Port outs for Cisco ASR 0 Router RTS Request to Send (tied to CTS) DTR Data Terminal Ready (always On) TXD Ring Indicator RXD DSR unused CTS Clear to Send (tied to RTS) Cisco ASR 0 Router Auxiliary Port s and outs The following table lists the pinouts of the dual RJ- ports for the auxiliary port signals. Table : Auxiliary Port outs for Cisco ASR 0 Router RTS Request to Send DTR Data Terminal Ready (always On) TXD RI Ring Indicator RXD Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 0 Router BITS Port s and outs DSR/DCD Data Set Ready/Data Carrier Detect CTS Clear to Send Cisco ASR 0 Router BITS Port s and outs The following table lists the pinouts of the front panel Building Integrated Timing Supply (BITS) RJ port. Table 9: BITS RJ- Interface outs for Cisco ASR 0 Router RX Ring Receive Ring RX TIP Receive TIP (T/E), TX Ring Unused TX TIP Unused, Cisco ASR 0 Router DB- out Assignments for Relays The following table lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB- connector. Table 0: Cisco ASR 0 Router DB- Connector out Assignments Common (CM) Normally Open (NO) Normally Closed (NC) SPARE CRTAA Critical Audible MAJAA Major Audible MINAA Minor Audible Cisco ASR 00-X Router Hardware Installation Guide 9
Cisco ASR 00-X Router Specifications Cisco ASR 00-X Router Specifications Common (CM) Normally Open (NO) Normally Closed (NC) SPARE CRTVA Critical Visual 9 MAJVA Major Visual 0 MINVA Minor Visual 9 SPARE SPAREunused pin reserved for future use 0,,,,,, Cisco ASR 00-X Router Specifications Table : Cisco ASR 00-X Router Specifications, on page 0 lists the Cisco ASR 00-X Router physical specifications. Note The Cisco ASR 00-X Router has the route processor, embedded services processor, and SIP integrated in the chassis. Table : Cisco ASR 00-X Router Specifications Dimensions (H x W x D) Weight Nominal operating temperature Short-term operating temperature Nominal operating humidity Short-term operating humidity Storage temperature Specification Height. in. (. mm) Width. in. (9. mm) Depth.0 in. (. mm) including card handles, cable-management brackets, and power supply handles) lb fully loaded 0 to 0 C 0 to 0 C 0 to 90% relative humidity to 90% 0 to +0 C 0 Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Specifications Cisco ASR 00-X Router Memory and Storage Options Power consumption Specification Maximum (DC): W Maximum (AC): 0 W Maximum (Out): 0 W Cisco ASR 00-X Router Memory and Storage Options Table : Memory and Storage Options for Cisco ASR 00-X Router, on page lists the hardware memory and storage options supported on the Cisco ASR 00-X Router. Table : Memory and Storage Options for Cisco ASR 00-X Router Memory Type ESP Route Processor External USB flash memory SSD Default GB DRAM The Cisco ASR 00-X Router comes with GB DRAM (default) The Cisco ASR 00-X Router supports two USB flash memory secure tokens Two 00-GB SATA SSD Maximum System Support GB DRAM GB DRAM maximum Solid State Drive Cisco ASR 00-X Router Hardware Installation Guide
Cisco ASR 00-X Router Memory and Storage Options Cisco ASR 00-X Router Specifications Cisco ASR 00-X Router Hardware Installation Guide